1966 Ford Ranch Wagon Air Intakes

Essential 1966 Ford Ranch Wagon Air Intakes

Edelbrock – Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors (Part No.12403)

Carburetor Accelerator Pump Cam Kit #12403 for 2300, 4150, And 4160 Carburetors

from

$40.99
The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:
  • Multi-Color
  • Plastic Material
  • Fits Holley® 2300, 4150, And 4160 Carburetors
  • Set of 8
  • Made In The USA
See More

Edelbrock – Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange) (Part No.1221)

Pro-Flo Chrome 14" Round Air Cleaner with 3" Paper Element (Deep Flange)

from

$43.99
Stamped from 18 gauge steel. Triple-chrome plated. High quality finish. Great looks. Works with all 5.152 inch carburetors. Base knock-outs for use with crankcase ventilation.

Product Features:
  • Stamped From 18-Gauge Steel
  • Triple-Chrome Plated
  • High-Quality Finish
  • Great Looks
  • Works With All 5.125 in. Carbs
  • Base Knock-Outs For Use w/Crankcase Ventilation
See More

Edelbrock – Intake Manifold Gasket for 1968-1987 429-460 Big-Block Fords (Part No.7223)

Intake Manifold Gasket for 1968-1987 429-460 Big-Block Fords

from

$27.99
Product Features:
  • 1.98″x2.26″
  • Features Embossed Silicone Bead Around The Intake Ports & Water Openings
  • .060″ Thick
  • Multi Piece Configuration
  • End Seals Not Included
See More

Edelbrock – Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1404)

Performer 1404 Carburetor: 500 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$435.99
The Edelbrock 1404 Performer Series 500 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristic

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Felpro – Air Cleaner Mounting Gasket (Part No.60038)

Air Cleaner Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific, providing unsurpassed quality for a seal you can trust
  • Validated for fit, form, and function
  • Engineered for the sealing repair environment
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Carburetor Mounting Gasket (Part No.9264)

Carburetor Mounting Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-139)

Carburetor Choke Pull-Off

from

$40.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Carquest – Carburetor Choke Pull-Off (Part No.779-070)

Carburetor Choke Pull-Off

from

$13.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Designed and manufactured to our stringent quality standards at a certified facility, so you can install with confidence
  • Premium components and durable materials withstand harsh engine conditions to increase longevity and lifespan
  • Undergoes extensive testing and validation for proper performance and peak reliability
  • As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.362660.1)

Steel Cup Expansion Plug 1-41/64 In., Height 0.360

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Performer Carburetor Calibration Kit #1487 for #1406 Carburetors (Part No.1487)

Performer Carburetor Calibration Kit #1487 for #1406 Carburetors

from

$62.99
Product Features:
  • Customize Carburetor Calibration and Performance
  • Owners Manual has Assembly Help
  • Includes Metering Rod Retaining Spring
  • Includes Metering Rods
  • Includes Metering Jets
  • Includes Step-Up Springs
See More

Edelbrock – Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip (Part No.12602)

Adjustable Carburetor Needle and Seat #12602 Size .097 With Viton Tip

from

$18.99
Product Features:
  • The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
  • Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.
See More

Edelbrock – Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip (Part No.12605)

Non-Adjustable Carburetor Needle and Seat #12605 Size .110 With Viton Tip

from

$20.99
The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:
  • Center Hung Floats
  • 0.11 in. Needle Diameter
  • Viton® Needle Material
  • Sold Individually
  • Non-Adjustable Type
See More

Edelbrock – Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg (Part No.12625)

Standard Flow Carburetor Power Valve #12625 Single Stage 2.5in Hg

from

$16.99
The Edelbrock #12625 Single Stage 2.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:
  • Gasket Or Seal Included
  • 2.5 in. Hg Opening Vacuum
  • Single Stage
  • Standard Flow Type
  • Made In The USA
See More

Edelbrock – Standard Flow Carburetor Power Valve #12645 Single Stage 4.5in Hg (Part No.12645)

Standard Flow Carburetor Power Valve #12645 Single Stage 4.5in Hg

from

$16.99
Product Features:
  • The Edelbrock #12645 Single Stage 4.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
  • During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12400 30cc (Part No.12400)

Carburetor Accelerator Pump Diaphragm #12400 30cc

from

$12.99
Product Features:
  • The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
  • Improper installation will void your warranty and may result in poor performance and engine or vehicle damage
See More

Edelbrock – Carburetor Accelerator Pump Diaphragm #12401 50cc (Part No.12401)

Carburetor Accelerator Pump Diaphragm #12401 50cc

from

$31.99
Edelbrock #12401 50cc Accelerator Pump Diaphragm for 4150 Carburetors. Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Product Features:
  • Rubber Material
  • For Holley®, Barry Grant, And Demon Gasoline Carburetors
  • No Hardware Included
  • 50cc Volume
  • Made iIn The USA
See More

Edelbrock – Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish (Part No.1107)

Ford Flathead 4-Barrel Intake Manifold for 1949-53 Ford Flathead, Satin Finish

from

$587.99
Product Features:
  • Flathead 4-Barrel Manifold
  • Dual Plane Type-4150 Style Flange
  • 4.06 in. Front Height, 5.06 in. Center Height, 6.06 in. Rear Height
  • Satin Finish
  • Made In The USA
See More

Edelbrock – Single-Quad Manifold and carb Kit for Small-Block Ford 289-302 (Part No.2033)

Single-Quad Manifold and carb Kit for Small-Block Ford 289-302

from

$1053.99
The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • RPM Air-Gap Manifold
  • Made In The USA
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair) (Part No.12457)

Standard Main Jet Carburetor Metering Jet #12457 Size .056 (Pair)

from

$13.99
The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 57 Maximum Jet Size
  • 0.056 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair) (Part No.12456)

Standard Main Jet Carburetor Metering Jet #12456 Size .055 (Pair)

from

$13.99
The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:
  • 56 Maximum Jet Size
  • 0.055 in. Orifice Diameter
  • 1/14-32 in. Thread Size
  • Standard Main Jet Type
  • Set of 2
See More

Edelbrock – Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs (Part No.12412)

Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs

from

$24.99
The Edelbrock #12412 Vacuum Secondary Spring Kit includes 7 springs that will fit on Holley 4150, 4150HP, 4160 series and various Demon Carburetors.

Product Features:
  • Steel Material
  • For Holley® 4150, 4150HP, 4160; Demon King, Mighty, Race, Road, Sea, Speed; Barry Grant Claw
  • Includes Lightest To Heavy
  • Set of 7
  • Made in The USA
See More

Holley – REPLACEMENT MAIN BODY KIT FOR 0-80457S (Part No.134-342)

REPLACEMENT MAIN BODY KIT FOR 0-80457S

from

$195.99
REPLACEMENT MAIN BODY KIT FOR 0-80457S

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1762)

Carburetor Tune-Up Kit

from

$24.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1777)

Carburetor Tune-Up Kit

from

$36.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1822)

Carburetor Tune-Up Kit

from

$37.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Repair Kit (Part No.2G1963)

Carburetor Repair Kit

from

$34.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Wells Vehicle Electronics – Carburetor Tune-Up Kit (Part No.2G1796)

Carburetor Tune-Up Kit

from

$44.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.
See More

Edelbrock – Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors (Part No.12750)

Carburetor Repair Kit #12750 Fits Most Holley 4160 Carburetors

from

$43.99
Product Features:
  • The Edelbrock #12750 4160 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
  • The kit comes with the necessary components to rebuild a 4160 style Carburetor.
See More

1966 Ford Ranch Wagon Air Intakes

You count on your 1966 Ford Ranch Wagon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Air Intakes. With 72 Air Intakes ranging in price from $1.49 to $2,024.99, you’re sure to find everything you need for your 1966 Ford Ranch Wagon.

Brands matter. If you want to shop a specific Air Intakes brand, we stock 7 different brands like Edelbrock, Felpro, and Holley. 1966 Ford Ranch Wagon Air Intakes start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Air Intakes is by asking professionals. Short of that, you can shop with confidence thanks to our 548 extensive product reviews on 1966 Ford Ranch Wagon Air Intakes. Some of the top-rated Air Intakes products we carry are Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.4 stars and Carburetor Vacuum Secondary Spring Kit #12412 Includes 7 Springs with 4.5 stars.

Did we mention you can order your Air Intakes from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Air Intakes inventory for your 1966 Ford Ranch Wagon below to get started!

Top-Rated Air Intakes Brands For Your 1966 Ford Ranch Wagon

Trusted Air Intakes OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Ford Ranch Wagon running right for years to come. In our inventory you’ll find brands like Edelbrock, Felpro, Holley, and even more.

Popular Holley Air Intakes

You’ll find popular Holley brand products across Carburetor Parts. All are waiting to get your 1966 Ford Ranch Wagon back on the road. Some of the top-rated Holley products in these categories are:
Prem Street Carbs (Avengers)
from $626.99
(2)
Prem Street Carbs (Avengers)
Carburetors

Top-Rated Edelbrock Air Intakes


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Air Intakes for your 1966 Ford Ranch Wagon, and some of our most reviewed Edelbrock parts include:

FAQs for 1966 Ford Ranch Wagon Air Intakes

What are the most purchased Air Intakes for the 1966 Ford Ranch Wagon?

Out of 72 Air Intakes for the 1966 Ford Ranch Wagon, the most popular in our inventory are:
Engine Intake Manifold Gasket Set
from $25.99
(3)
Engine Intake Manifold Gasket Set
Intake Manifold Gasket Sets
Carburetor Mounting Gasket
from $2.99
This product is not rated
Carburetor Mounting Gasket
Carburetor and Injector Mount Gaskets
AIR CLEANER MOUNTING GASKET
from $2.49
(2)
AIR CLEANER MOUNTING GASKET
Air Cleaner Mount Gaskets

What are the top-rated 1966 Ford Ranch Wagon Air Intakes?

Top-rated Air Intakes for your 1966 Ford Ranch Wagon based on customer reviews/ratings are:
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
from $451.99
(7)
Performer 1407 Carburetor: 750 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was tu”
Carburetor Mounting Gasket
from $2.79
(4)
Carburetor Mounting Gasket
“Excellent quality USA made felpro gaskets”