1966 Ford GT40 Performance and Racing Products
Find Your Specific 1966 Ford GT40 Performance and Racing Products
Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1966 GT40. Advance Auto Parts has popular GT40 parts like Performance Ignition Products, Performance Exhaust Products, Performance Fuel Systems and more. You’ll also find aftermarket and OEM Performance and Racing Products for other GT40 model years including
1964,
1965,
1967,
1968,
1969 and more. Select a category of 1966 Ford GT40 Performance and Racing Products below and start saving instantly.
Popular 1966 Ford GT40 Performance and Racing Products Categories
Essential Performance and Racing Products for 1966 Ford GT40s
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)
from
$30.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)
from
$527.99
The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.
Product Features:
See More
Product Features:
- Universal Floor Mount
- Base Can Be Trimmed-Custom Fit
- Cable Operated
- Quick Installation
- Accurate Shifting
Competition Cams – VALVE SPRINGS, 1.437" SINGLE 1 ST (Part No.942-16)
from
$257.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 115 lbs. @ 1.700″, Open Pressure: 284 lbs. @ 1.200″
- O.D.: 1.437″, I.D.: 1.039″
- Single valve springs with damper
- Approximately .510″ max lift at recommended installed height
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)
from
$15.99
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.
Product Features:
See More
Product Features:
- Eliminates bolt in favor of stud mount design
- Chrome plated
- Ideal For Ignition Distributor
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Product Features:
See More
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1613)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)
from
$186.99
Product Features:
See More
- Mechanical Operation
- Fuel Sending Unit Not Included
- For Small-Block 289-351 Ford Engines
- In Tank Mounting Type
- 110 GPH
Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.31-601-5)
from
$340.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
Mr. Gasket – Waterpmpply (Part No.8829)
from
$74.99
Replace your stock black engine pulleys with chrome plated steel pulleys from Mr. Gasket.
Product Features:
See More
Product Features:
- Triple Groove
- Chrome Plated
- Diameter: 5.90″
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)
from
$314.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal
- Available in Multiple Finishes
Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet (Part No.60329)
from
$1087.99
50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.
Product Features:
See More
Product Features:
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- Intake Valves Are For Use w/Stock Pistons
Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)
from
$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Edelbrock – Classic Series Valve Covers: Small Block Ford 221-351W 62-95, Polished Aluminum (Part No.4160)
from
$401.99
The Edelbrock #4160 Classic Series Valve Covers are designed for Ford 221-351W V8 1962-95 applications. Edelbrock first made these aluminum valve covers in the late ’50s and they’re still a classic. They are made of heavy-gauge sand-cast aluminum, Overall height is measured from base to top at the highest point. Edelbrock classic valve covers can be machined to accept breathers if desired.
Product Features:
See More
Product Features:
- Small Block Ford 221-351W 62-95
- Tall
- Polished Aluminum
- Set Of Two
Mr. Gasket – Thermocap Radiator Cap (Part No.2470B)
from
$54.99
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Alternator Bracket (Part No.5185)
from
$44.99
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.
Product Features:
See More
Product Features:
- Fits Small Block Ford 1965-’69 – OEM Style
- Polished To High Luster
- Chrome Plated For Lasting Beauty
Hays – Flywheels (Part No.12-535)
from
$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Upgrade your 1966 Ford GT40 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1966 Ford GT40, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your GT40 functioning at its best. At Advance Auto Parts, we offer a wide selection of 101 Performance and Racing Products for the 1966 Ford GT40, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1966 Ford GT40 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $7.99 to $1,087.99, with
an average price of $256.27.
Our 101 Performance and Racing Products in stock come from 11 trusted brands, so you’re sure to find the right part for your 1966 Ford GT40 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1966 Ford GT40, we stock popular OEM and aftermarket Performance and Racing Products from top names
like Edelbrock, FEL-PRO Performance, Competition Cams, and more.
Edelbrock Performance and Racing Products
start at just $30.99 and boast an impressive 4.4 stars average rating from customers.
FEL-PRO Performance and Competition Cams also bring quality to the table, with Performance and Racing Products available starting at $35.99, and at an average 4.2 stars rating.
With 126 customer reviews and counting, our 1966 Ford GT40 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1966 Ford GT40 is always ready to roll. We’re committed to providing you with everything you need to keep your GT40 in top shape, all in one place.
Start shopping confidently below for your 1966 Ford GT40!
Best-Selling Performance Ignition Products for 1966 Ford GT40s
Enhance the driving experience in your Ford with 4 quality Performance Ignition Product components, starting at $33.99.
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Most Popular 1966 Ford GT40 Performance Exhaust Products
Customize your Ford with 3 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets and
Performance Exhaust Header Hardware, all
priced under $45.99.
Mr. Gasket – Alternator Bracket (Part No.5185)
from
$44.99
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.
Product Features:
See More
Product Features:
- Fits Small Block Ford 1965-’69 – OEM Style
- Polished To High Luster
- Chrome Plated For Lasting Beauty
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)
from
$45.99
Product Features:
See More
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1442)
from
$33.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Top Picks for 1966 Ford GT40 Performance Fuel Systems
Upgrade Ford GT40s with top-quality Performance Fuel Systems parts, including 6 OEM and aftermarket selections for your 1966 model.
Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)
from
$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist
Product Features:
See More
Product Features:
- Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
- Electric Choke
- 4 Barrel Count
- Square Bore
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)
from
$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
Edelbrock – Performer RPM Series fuel pump is for 289-351W Ford (Part No.1725)
from
$186.99
Product Features:
See More
- Mechanical Operation
- Fuel Sending Unit Not Included
- For Small-Block 289-351 Ford Engines
- In Tank Mounting Type
- 110 GPH
Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)
from
$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80870)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
Holley – Prem Street Carbs (Avengers) (Part No.0-80570)
from
$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:
See More
Product Features:
- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet-Flow Tested To Assure It Arrives Ready To Run
- Street Ready; Out Of The Box
In-Demand Performance Engines for 1966 Ford GT40s
Select from 75 premium Performance Engines parts for your 1966 Ford GT40, with prices ranging from $7.99 to $1,087.99.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)
from
$35.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)
from
$50.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
- Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
- Not intended for use in emission controlled vehicles.
Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)
from
$350.99
These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don’t accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.
Product Features:
See More
Product Features:
- Ultimate street rocker designed for serious performance enthusiasts
- Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
- Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
- 15 to 30 horsepower increase over stock rocker arms
- Use in any applications with less than 350 lbs. open spring pressure
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1011-1)
from
$52.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)
from
$30.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Competition Cams – VALVE SPRINGS, 1.437" SINGLE 1 ST (Part No.942-16)
from
$257.99
Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.
Product Features:
See More
Product Features:
- Seat pressure: 115 lbs. @ 1.700″, Open Pressure: 284 lbs. @ 1.200″
- O.D.: 1.437″, I.D.: 1.039″
- Single valve springs with damper
- Approximately .510″ max lift at recommended installed height
Edelbrock – Performer-Plus Camshaft Kit for Ford FE 352-428 V8 (Part No.2106)
from
$392.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)
from
$249.99
The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.
Product Features:
See More
Product Features:
- Cost effective aluminum construction provides superior strength to weight ratio
- Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
- Durable design increases valve lift while withstanding the rigors of moderate race use
- Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.
FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1020)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1817)
from
$29.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Valve Cover Gasket Set (Part No.276)
from
$34.99
Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-density cork/rubber blend gasket material
- Provides excellent sealing and durability
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)
from
$314.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal
- Available in Multiple Finishes
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$359.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1614)
from
$25.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
Competition Cams – Set of 16 Umbrella Valve Seals for Stock Guide Size, 11/32" Valve Stem (Part No.502-16)
from
$230.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.
Product Features:
See More
Product Features:
- Work with stock guides and 11/32″ valve stem diameter
- Valve stem oil seals keep unwanted oil from entering the combustion chamber
- Several different types of valve seals are offered
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 5 Piece Set (Part No.1246)
from
$39.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- Performance intake manifold gaskets designed without a metal core, to allow engine builders to trim the gasket for exact fit on modified ports.
- Standard and Low riser
- Printoseal elastomeric sealing beads to provide extra sealing strength around the intake port.
- Not intended for use in emission controlled vehicles.
Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)
from
$454.99
Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i
Product Features:
See More
Product Features:
- RPM Air-Gap for 302-331-347 Small-Block Ford V8
- Air-Gap design features an open air space under the plenum
- Separates fuel and air from engine heat
- Larger runners over standard 7121 manifold
- Includes nitrous bosses
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$338.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam (Part No.31-601-5)
from
$340.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam (Part No.31-250-4)
from
$297.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – High Energy/Marine 212/212 Hydraulic Flat Cam (Part No.31-216-2)
from
$242.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Edelbrock – Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet (Part No.60329)
from
$1087.99
50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.
Product Features:
See More
Product Features:
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- Intake Valves Are For Use w/Stock Pistons
Competition Cams – ROCKERS, FC 1.8 7/16 (Part No.1838-16)
from
$704.99
ROCKERS, FC 1.8 7/16
Competition Cams – ENGINE ROCKER ARM (Part No.1834-16)
from
$649.99
ENGINE ROCKER ARM
Most Sold 1966 Ford GT40 Performance Distributors
Explore our best-selling Ford parts for the 1966 GT40 among 2 OEM and aftermarket options starting from $15.99.
Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2502)
from
$15.99
Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed. Fits 1962-2001 Small Block Ford V8s, including both Windsor and Cleveland as well as Ford 385 series 429/460 big blocks including Boss models.
Product Features:
See More
Product Features:
- Eliminates bolt in favor of stud mount design
- Chrome plated
- Ideal For Ignition Distributor
Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)
from
$599.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.
Product Features:
See More
Product Features:
- Improved Combustion And Economy
- Increased Spark Plug Life
- Improved Cold Weather Starting
- Maintenance Free Operation
- Accurate Spark Timing
- Self-Lubricating Bushings
- Years Of Trouble-Free Service
Top-Rated Performance and Racing Products Brands For Your 1966 Ford GT40
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1966 Ford GT40s. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock, FEL-PRO Performance, and Competition Cams, and more. Performance and Racing Products from these brands that fit a 1966 GT40 start at just $30.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Edelbrock 1966 Ford GT40 Performance and Racing Products
When it comes to maintaining or upgrading your 1966 Ford GT40, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1966 Ford GT40. With over 3 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $30.99, with an average price of just $245.66. Plus, with over 7 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$186.99
(3)
Performer RPM Series fuel pump is for 289-351W Ford
“I installed this product on my ’57 Ford F100 that has a ’74 302 v8 under the hood. I geat great fuel pressure now, and this pump is a direct match fo”
from
$30.99
(1)
Intake Manifold Gasket for 1963-1996 Small-Block Fords
“Minor fitment corrections to line up with my AFR185 heads and Victor Jr Intake.”
from
$518.99
(3)
Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“only required idle mixture and idle speed adjustments.”
Popular FEL-PRO Performance 1966 Ford GT40 Performance and Racing Products
FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1966 Ford GT40 owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1966 GT40, Advance Auto Parts carries a full inventory of 3 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $35.99 to $52.99, plus, with more than 7 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$52.99
(2)
Cylinder Head Gasket: Steel Core Composite, Without Head Bolts
“cometic head gasket is great but prob is dose not seal if the block isn’t mirror finished. many people switch over to felpro and it has worked out gre”
FAQs for 1966 Ford GT40 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1966 Ford GT40s?
Out of 101 Performance and Racing Products that fit 1966 Ford GT40s, the following parts are the top sellers:
- Lower Intake Manifold Gasket Set: 11 Piece Set (5991277) – $35.99
- Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (5189551) – $52.99
- Intake Manifold Gasket for 1963-1996 Small-Block Fords (22342074) – $30.99
What’s the price range for 1966 Ford GT40 Performance and Racing Products?
Performance and Racing Product prices for the 1966 Ford GT40 start at $7.99 and go up to $1,087.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1966 Ford GT40?
The average price for Performance and Racing Products for the 1966 Ford GT40 is $256.27. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Ford GT40 model years?
What are the cheapest Performance and Racing Products for my 1966 Ford GT40?
The cheapest 1966 Ford GT40 Performance and Racing Products we carry in stock are:
- High Energy 6.881" Long, 5/16" Diameter Pushrod (50289324) – $7.99
- High Energy 6.400" Long, 5/16" Diameter Pushrod (50289676) – $8.99
- 10 Degree Superlock Steel Retainer for 1.437"-1.500" OD Valve Spring (50289470) – $10.99
- 7 Degree Steel Retainer for 11/32" Valve with 1.437"-1.500" Spring (50289117) – $10.99
- Engine Valve Spring (50286901) – $13.99
What are the top-rated Performance and Racing Products that fit the 1966 Ford GT40?
Out of 126 reviews by customers, our 1966 Ford GT40 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1966 Ford GT40 and their top-rated products:
- Performance Ignition Products
- Unilite Ignition Module (17350025) – $92.99
What types of Performance and Racing Products do you sell for my 1966 Ford GT40?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1966 Ford GT40:
Can I get help with 1966 Ford GT40 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.
What is your return policy for Ford GT40 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Ford GT40 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
