Plymouth PB150 Air Intakes

The Edelbrock #12371 kit includes the primary fuel bowl gasket, the primary metering block gasket, the secondary metering block gasket and a metering plate gasket. The Edelbrock #12371 fits Holley 4160 carburetors.

Product Features:

• Nitrile Rubber Material
• Metering Block Type
• Set of 4
• Fits Holley® 4160 Carburetors
• Made In The USA

Product Features:

• Customize Carburetor Calibration and Performance
• Owners Manual has Assembly Help
• Includes Metering Rod Retaining Spring
• Includes Metering Rods
• Includes Metering Jets
• Includes Step-Up Springs

Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po

Product Features:

• Idle-5500 RPM Range
• Dual Plane Type-4150 Style Flange
• 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
• Black Powder Coated Finish
• Non-EGR

Product Features:

• The Edelbrock #12760 4150 Carburetor rebuild kit is for Holley, Demon and Quick Fuel Carburetors.
• The kit comes with the necessary components to rebuild a 4150 style Carburetor.

The carburetor is a device used to mix air and vaporized fuel for combustion in old school engine applications. The last year for carburetors in motor vehicles used on the road in the U.S. is listed as 1994. The carburetor was typically a down draft style device where oxygen was drawn from the top of the carburetor pulled in by the engine vacuum through a venturi style opening, just above the venturi were jets, or metered openings where fuel was pulled from a bowl of fuel within the carburetor.

Product Features:

• Application matched components ensure carburetor can be returned to like new condition.

These special Grade 8 intake manifold bolts feature a 12-point smaller-than-standard head and flange, and include special extra thick flat washers for optimum clamping pressures. They’re ideal for use where space is minimal, typical on larger runner race manifolds. These bolts and washers are bright zinc plated for protection and good looks.

Product Features:

• Features 12-point Smaller-than-standard Bolt Head
• Thick Flat Washers Distribute Optimum Clamp Load
• Ideal Use Where Space Is Minimal On Race Manifolds
• Bolts And Washers Zinc Plated For Protection
• Zinc Plated For Protection

Product Features:

• Gasket

The Edelbrock #12605 Hardware Kit will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 45

Product Features:

• Fits Holley® Carburetors With Center Hung Fuel Bowl
• Includes Adjusting Nut
• Includes Locking Screw
• Includes O-Ring
• Includes Washers

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

Converts throttle lever on carburetor for proper use. For Edelbrock performer series carburetors only. Also accepts cruise control. Use appropriate throttle cable plate.

Product Features:

• Converts Throttle Lever on Carb for Proper Use
• For Edelbrock Performer Series Carburetors Only
• Also Accepts Cruise Control
• Use with Appropriate Throttle Cable Plate

Our Engine Intake Manifold Expansion Plug is conveniently designed as a direct replacement for stripped plugs. A proper fit is ensured, every time.

Product Features:

• Manufactured from high quality materials for a long service life
• Torque values listed on parts (where applicable)
• Easy to install
• Constructed to strict engineering quality standards

Product Features:

• The Edelbrock Accelerator Pump Diaphragm 30cc Gasoline #12400 for 4150 Carburetors Proper installation is the responsibility of the installer.
• Improper installation will void your warranty and may result in poor performance and engine or vehicle damage

Product Features:

• The Edelbrock #12665 Single Stage 6.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate.
• During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation and bogging, ensuring the smooth delivery of power without any drivability concerns.

The Edelbrock #12635 Single Stage 3.5 Hg Power Valve operates by using engine vacuum to control the opening and closing rate. During heavy load or under full power situations, they open to supply additional fuel to the main system to eliminate hesitation

Product Features:

• Gasket Or Seal Included
• 3.5 in. Hg Opening Vacuum
• Single Stage
• Standard Flow Type
• Made In The USA

The Edelbrock #12403 Accelerator Pump Cam Kit Assortment Package of 8. These accelerator pump cams will have different shapes and profiles, allowing you to fine tune the accelerator pump’s performance to the engine’s requirements. Cam “lift” will directly

Product Features:

• Multi-Color
• Plastic Material
• Fits Holley® 2300, 4150, And 4160 Carburetors
• Set of 8
• Made In The USA

Product Features:

• The Edelbrock #12602 Adjustable Inlet Needle and Seat assembly will fit Carburetors with center hung fuel bowls and can be used as replacements or performance upgrades.
• Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 2300, 4150, 4160, 4165, 4175 and 4500 Series, Quick Fuel 4500, Professional Series and Q-Series, as well as various Demon Carburetors.

The Edelbrock #12605 Non-Adjustable Inlet Needle and Seat assembly will fit carburetors with center hung fuel bowls and can be used as replacements or performance upgrades. Kit includes one locking screw, two gaskets and one O-ring. For use with Holley 23

Product Features:

• Center Hung Floats
• 0.11 in. Needle Diameter
• Viton® Needle Material
• Sold Individually
• Non-Adjustable Type

The Edelbrock 94 #12457 Carburetor Jets .057″Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

• 57 Maximum Jet Size
• 0.056 in. Orifice Diameter
• 1/14-32 in. Thread Size
• Standard Main Jet Type
• Set of 2

The Edelbrock 94 #12456 Carburetor Jets .056″ Intended for tuning the Edelbrock 94 carburetor, but will also fit original Holly 94’s and its later variations. Jets sold in pairs.

Product Features:

• 56 Maximum Jet Size
• 0.055 in. Orifice Diameter
• 1/14-32 in. Thread Size
• Standard Main Jet Type
• Set of 2

The 0-4412 is designed as a stock replacement for 2BBL street applications as well as being mandated for some oval track racing sanctioning bodies. Whether you are looking for a replacement carburetor to replace your tired and worn factory 2BBL or one to

Product Features:

• Gold Dichromate Finish For Corrosion Resistance w/Classic Look
• Man. Choke Cable Hand Controlled For Cold Start Control
• 50CC Accelerator Pump For Add. Fuel Under Initial Acceleration
• Power Valve Blow-Out Protection
• 100% Wet-Flow Tested To Assure It Arrives Ready To Run
• Does Not Work w/A.O.D. Transmissions
• Installation/Tuning DVD Incl.

The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, 12 hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws Each calibration has been dyno and track tested to deliver proven performance!

Product Features:

• All Aluminum Construction Saves 3.8 lbs. Over Original Models
• 28% Weight Savings
• Calibrations For Todays Larger Race Engines and New Fuels
• Fully Machined From Venturi Throat To Throttle Bore
• Integrated Idle Bypass Valve Allows For Adjustment Of Idle
• 12 Hole Billet Booster Superior Atomization/Throttle Response
• Metering Blocks Feature Improved True Gasket Sealing
• Dual 50CC Accelerator Pumps Fuel From Idle To Full Throttle
• Fuel Bowl Provides 20% More Fuel Capacity Controls Slosh
• Clear Sight Windows On Sides Of Bowl For Fuel Level Adjustments
• Drain Plug On Bowl Provides Easy Access To Empty Bowl
• Contoured Hex Head Squirter Screws For Streamlined Airflow

Xtreme Performance – Holley Ultra XP(TM) Circle Track Carburetors! Ultra XP carbs are 38% lighter than our original HP, have fuel capacity that is 20% greater and 30 other new features! They’re available in our Hard Core Gray(TM) hard coat anodized finish with Black(TM) billet for improved corrosion protection & also available in natural tumble-polished aluminum with Black(TM) metering blocks and base plate. The Aluminum Ultra XP Cirlce Tracks are available in 650 & 750 CFM’s. Holley Ultra XP carburetors are Specifically Calibrated for Circle Track & offer new features such as anti-siphon valve in the main body; high capacity HP bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh. Other features include all aluminum construction, fully tunable billet metering blocks, billet base plate, wedge floats, adjustable secondary linkage and knurled (hand adjustable) curb idle screws. Holley Ultra XP carburetors are the ultimate in square bore race carburetors!

Product Features:

• Aluminum Construction
• Saves 4.5 Pounds 38% Weight Savings
• Contoured Venturi Inlet Balances Airflow For Increased hp
• Air Bleeds Moved Outward For Smoother Transition Of Airflow
• Metering Blocks/True Gasket Sealing/Fully Adjustable
• Idle Bypass Valve Eliminates Holes In Throttle Plates
• Dual 30CC Accelerator Pumps Fuel From Idle To Full Throttle
• Fuel Bowls Provide 20% More Fuel Capacity Controls Slosh
• Clear Sight Windows On Both Sides Of Bowls For Safe Fuel Level
• Drain Plug On Bowl Provides Easy Access To Empty Bowl
• 8AN O-Ringed Inlet Threads Offer A Variety Of Plumbing Options
• 4 Corner Idle Allows You To Precisely Control Your Idle System

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function