1966 Ford Fairlane Drivetrains
More 1966 Ford Fairlane Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1966 Ford Fairlane, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1966 Ford Fairlane Drivetrains
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
Yukon Gear – Positraction Internals For 8" And 9" Ford With 31 Spline Axles, In A 4-Pinion Design (Part No.16026)
from
$315.99
Yukon positraction internals for 8″ and 9″ Ford with 31 spline axles, in a 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Ford 9″ with Trac Loc positraction with 31 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Powertrax – Grip PRO Traction System (Part No.GT109031)
from
$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Felpro – Differential Carrier Gasket (Part No.RDS 13270)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-013)
from
$1.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)
from
$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fill plug
- Fits Ford 9″
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Yukon Gear – Standard Open And Tracloc Cross Pin Block For 9" Ford (Part No.33336)
from
$28.99
Standard open and TracLoc cross pin block for 9″ Ford.
Product Features:
See More
Product Features:
- Cross pin block
- Fits Ford 9″
Richmond Gear – RngPnn (Part No.79-0017-1)
from
$538.99
RngPnn
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$198.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Product Features:
See More
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
National – Multi Purpose Seal (Part No.51098)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Pilot Bearing For Ford 8" (Part No.18043)
from
$42.99
9.25 Chrysler FRONT PINION KIT , 03 & UP DODGE TRUCK .
Product Features:
See More
Product Features:
- Pilot bearing
- Fits Ford 8″
Yukon Gear – DiffrlPinSupport (Part No.32358)
from
$819.99
DiffrlPinSupport
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 1.0″ long
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)
from
$63.99
1.250″ pinion adaptor sleeve (stock pinion into large support).
Product Features:
See More
Product Features:
- Adapter sleeve
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)
from
$21.99
8.75″ Chrysler & 9″ Ford preload shim kit.
Product Features:
See More
Product Features:
- Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing
Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)
from
$4.99
Trac Loc clutch guide for 9″ Ford.
Product Features:
See More
Product Features:
- Clutch guide
- Fits Ford 8″ and 9″
Yukon Gear – 9" 31Spline (69-73Mustang & Others) Axle Seal (Part No.30211)
from
$16.99
9″ 31spline (69-73Mustang & OTHERS) axle seal (1.5″ shaft).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits 1969-1973 Ford Mustang with Ford 9″
Yukon Gear – Yoke (Short, For Daytona Support) For Ford 9" With 28 Spline Pinion And A 1310 U/Joint Size (Part No.41056)
from
$308.99
Yukon yoke (short, for Daytona support) for Ford 9″ with 28 spline pinion and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. 4″ length. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″
- 28 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
National – Bearings (Part No.206-L)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Spider Gear Kit For And 9" Ford With 28 Spline Axles And 4-Pinion Design (Part No.16032)
from
$315.99
Yukon standard open spider gear kit for and 9″ Ford with 28 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Ford 8″ and 9″ open differential with 28 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – 9" Ford Gasket (Part No.23012)
Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)
from
$191.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ with Daytona pinion support
- Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.
Powertrax – Lock Right Locker (Part No.1810-LR)
from
$339.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
National – Bearings (Part No.HM89410)
from
$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1966 Ford Fairlane Drivetrains Categories
1966 Ford Fairlane Drivetrains
You count on your 1966 Ford Fairlane to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 429 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1966 Ford Fairlane.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 14 different brands like Moog, DriveWorks, and Spicer. 1966 Ford Fairlane Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 4,096 extensive product reviews on 1966 Ford Fairlane Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 3.9 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1966 Ford Fairlane below to get started!
Top-Rated Drivetrains Brands For Your 1966 Ford Fairlane
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Ford Fairlane running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Spicer, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1966 Ford Fairlane back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1966 Ford Fairlane, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1966 Ford Fairlane Drivetrains
What are the most purchased Drivetrains for the 1966 Ford Fairlane?
Out of 429 Drivetrains for the 1966 Ford Fairlane, the most popular in our inventory are:
What are the top-rated 1966 Ford Fairlane Drivetrains?
Top-rated Drivetrains for your 1966 Ford Fairlane based on customer reviews/ratings are:
