1966 Ford Club Wagon Alternators and Starters

Essential 1966 Ford Club Wagon Alternators and Starters

Carquest Premium – Alternator Brush Set (Part No.XAA1029)

Alternator Brush Set

from

$3.99
The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:
  • Application matched components ensure the charging system can be returned to like new condition.
See More

Carquest Premium – Starter Remanufactured (Part No.3131S)

Starter  Remanufactured

from

$83.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by a Limited Lifetime Warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Each unit is triple-tested to ensure quality and performance
  • All wear components (brushes, bushings, and bearings) are replaced with all NEW components in the remanufacturing process
  • Tech Hotline with trained ASE Certified Technicians: Call Carquest Technical Support at 1-800-228-9672
See More

Carquest Professional – Starter-New (Part No.3131SN)

Starter-New

from

$136.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
  • Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
  • All new components are utilized to ensure long service life
  • Internal electronics are upgraded for heavy duty reliability (where applicable)
  • Armatures and commutators are 100% load tested
  • Application-specific technical bulletins included where applicable
  • All units are 100% triple tested to ensure quality and performance
  • Technical support team staffed with ASE Certified Technicians: 1-800-228-10468
See More

National – Bearings (Part No.200-CC)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Ball Bearing (Part No.S-200-CC)

Ball Bearing

from

$6.79
Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.MNJ-471-S)

Bearings

from

$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Ball Bearing (Part No.SL-203-FF)

Ball Bearing

from

$13.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Needle Bearing (Part No.S-MNJ-471-S)

Needle Bearing

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.203-S)

Bearings

from

$21.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.203)

Bearings

from

$19.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.303-S)

Bearings

from

$31.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Premium – Alternator Rectifier Bridge (Part No.SCC1072)

Alternator Rectifier Bridge

from

$45.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest HD Electrical – Alternator: New, 90 Amps, Without Pulley (Part No.71-7712N)

Alternator: New, 90 Amps, Without Pulley

from

$282.99
Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are pri

Product Features:
  • High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
  • Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
  • Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
  • Integrated magnetic switch provides protection against weak power from batteries.
  • Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
  • Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
  • Load dump protection ensures transient voltage spikes do not damage transistor
  • Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.
See More

Mr. Gasket – Alternator (Part No.5124)

Alternator

from

$363.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability. This Ford 1G style small case 80 amp alternator can be used as an original equipment replacement with the original equipment external regulator. This is not a 1-wire alternator.

Product Features:
  • Fits Most 1961-’85 Ford Vehicles w/ Small Case Alternator
  • Bolt Spacing 6.875″
  • Ford 1G Style Small Case Alternator
  • 80 Amps
  • Chrome Plated Finish
  • includes V-Belt Pulley – 1-Groove
  • Use w/ OEM Style Regulator
See More

Carquest Premium – Alternator: Remanufactured, 55 Amps (Part No.7058A)

Alternator: Remanufactured, 55 Amps

from

$69.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More

1966 Ford Club Wagon Alternators and Starters

You count on your 1966 Ford Club Wagon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Alternators and Starters. With 11 Alternators and Starters ranging in price from $3.99 to $363.99, you’re sure to find everything you need for your 1966 Ford Club Wagon.

Brands matter. If you want to shop a specific Alternators and Starters brand, we stock 5 different brands like Carquest Premium, Driveworks, and National. 1966 Ford Club Wagon Alternators and Starters start as low as $3.99!

One of the best ways to find top quality OEM or aftermarket Alternators and Starters is by asking professionals. Short of that, you can shop with confidence thanks to our 147 extensive product reviews on 1966 Ford Club Wagon Alternators and Starters. Some of the top-rated Alternators and Starters products we carry are Bearings with 1.0 stars.

Did we mention you can order your Alternators and Starters from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Alternators and Starters inventory for your 1966 Ford Club Wagon below to get started!

Top-Rated Alternators and Starters Brands For Your 1966 Ford Club Wagon

Trusted Alternators and Starters OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Ford Club Wagon running right for years to come. In our inventory you’ll find brands like Carquest Premium, Driveworks, National, and even more.

Popular Driveworks Alternators and Starters

You’ll find popular Driveworks brand products across Alternator Parts. All are waiting to get your 1966 Ford Club Wagon back on the road. Some of the top-rated Driveworks products in these categories are:
Ball Bearing
from $13.29
(7)
Ball Bearing
Commutator End Bearings

Top-Rated Carquest Premium Alternators and Starters


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Alternators and Starters for your 1966 Ford Club Wagon, and some of our most reviewed Carquest Premium parts include:
Starter  Remanufactured
from $83.99
(23)
Starter Remanufactured
Starters
Alternator: Remanufactured, 55 Amps
from $69.99
(5)
Alternator: Remanufactured, 55 Amps
Alternators

FAQs for 1966 Ford Club Wagon Alternators and Starters

What are the most purchased Alternators and Starters for the 1966 Ford Club Wagon?

Out of 11 Alternators and Starters for the 1966 Ford Club Wagon, the most popular in our inventory are:
Bearings
from $21.49
(2)
Bearings
Drive End Bearings
Bearings
from $19.49
(1)
Bearings
Drive End Bearings
Starter-New
from $136.99
(1)
Starter-New
Starters

What are the top-rated 1966 Ford Club Wagon Alternators and Starters?

Top-rated Alternators and Starters for your 1966 Ford Club Wagon based on customer reviews/ratings are:
Bearings
from $14.29
(1)
Bearings
“This bearing is now gonna sit on the self till I run into the alternator that it does fit.”