1966 Chevrolet Chevy II Steering and Chassis Parts

Essential 1966 Chevrolet Chevy II Steering and Chassis Parts

Driveworks – Tie Rod End (Part No.DW-ES350S)

Tie Rod End

from

$6.49
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Performance tested to ensure durability
  • Forged micro-alloy steel construction for strength and durability
  • A slotted nut and cotter pin for a more secure installation
See More

Carquest Premium – Return Hose Assembly (Part No.36135)

Return Hose Assembly

from

$36.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Lares – New Power Steering Pump (Part No.12032)

New Power Steering Pump

from

$219.99
New Power Steering Pumps are engineered to OE specifications. All units are carefully packaged to insure safe arrival at your door.
See More

Rare Parts – Strut Rod (Part No.RP17686)

Strut Rod

from

$266.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More

KAI – PS Pump Pulley (Part No.GMK4044288655)

PS Pump Pulley

from

$104.99
New Goodmark Power Steering Pulley For All Chevrolet Models Except Those With Air Conditioning Or High Performance

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Lakewood – J BOLT (Part No.20580)

J BOLT

from

$75.99
J BOLT

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

National – Multi Purpose Seal (Part No.313842)

Multi Purpose Seal

from

$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Powercraft – Steering Gear Complete Pitman Shaft Seal Kit (Part No.8766)

Steering Gear Complete Pitman Shaft Seal Kit

from

$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Caster/Camber Shim (Part No.K100191)

Caster/Camber Shim

from

$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K5227)

Stabilizer Bar Bushing Kit

from

$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Rare Parts – Cam Bolt & Bushing Kit (Part No.RP15809)

Cam Bolt & Bushing Kit

from

$89.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves vehicle handling
  • Restores OE alignment
  • Improves steering geometry
  • Easy camber adjustment
See More

Powercraft – Pump Drive Shaft Seal Kit (Part No.8711)

Pump Drive Shaft Seal Kit

from

$7.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

Carquest Premium – Repair Fittings (Part No.35015)

Repair Fittings

from

$8.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Powercraft – Control Valve Seal Kit (Part No.7864)

Control Valve Seal Kit

from

$24.29
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

National – Multi Purpose Seal (Part No.7013S)

Multi Purpose Seal

from

$20.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Energy Suspension – Sway Bar Bushing Set (Part No.3.5202R)

Sway Bar Bushing Set

from

$29.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Powercraft – Pump Seal Kit (Part No.8755)

Pump Seal Kit

from

$34.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

MOOG – Ball Joint (Part No.K692)

Ball Joint

from

$99.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Energy Suspension – Strut Rod Bushing Set (Part No.3.7105G)

Strut Rod Bushing Set

from

$29.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

Rare Parts – Idler Arm Repair Kit (Part No.RP20472)

Idler Arm Repair Kit

from

$182.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Repairs worn components
  • Reduces vibration
  • Reduces tire wear
See More

MOOG – Idler Arm Bushing Kit (Part No.K6022)

Idler Arm Bushing Kit

from

$28.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

TRW – TRW Tie Rod End (Part No.M3010454466TRW)

TRW Tie Rod End

from

$56.44
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
See More

Carquest Premium – Pressure Hose Assembly (Part No.35257)

Pressure Hose Assembly

from

$40.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

National – Multi Purpose Seal (Part No.474131)

Multi Purpose Seal

from

$11.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Design type: spring loaded; multi-lip
  • Temperature range: -40°F to 225°F / -40°C to 107°C
  • Good low temperature capability
  • Low swell in hydrocarbon fluids
  • Delivers quality and reliable performance for every type of repair
See More

Cardone – Power Steering Control Valve (Part No.28-6623)

Power Steering Control Valve

from

$313.99
Power Steering Pumps are an integral element of a car’s power steering system, as well as Power Steering Control Valves, which vary fluid flow and system pressures to provide reliable vehicle steering. CARDONE Remanufactured Power Steering Control Valves provide a reliable solution to replace your original defective unit. All CARDONE Power Steering Control Valves are computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure quiet, like-new performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:
  • Units are supplied with all new O.E. style seals and O-rings to eliminate chance of leaks
  • Each Control Valve is computer tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure quiet, like-new performance
  • Guaranteed fit and function
  • Meets or exceeds O.E.M performance
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.35002)

Bulk - 3/8" I.D. Return Hose J189

from

$47.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

1966 Chevrolet Chevy II Steering and Chassis Parts

You count on your 1966 Chevrolet Chevy II to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 64 Steering and Chassis Parts ranging in price from $2.49 to $363.99, you’re sure to find everything you need for your 1966 Chevrolet Chevy II.

Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 16 different brands like Imperial, Carquest Premium, and Cardone. 1966 Chevrolet Chevy II Steering and Chassis Parts start as low as $2.49!

One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4,871 extensive product reviews on 1966 Chevrolet Chevy II Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Bearings with 4.7 stars and Bulk – 3/8" I.D. Return Hose J189 with 4.6 stars.

Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1966 Chevrolet Chevy II below to get started!

Top-Rated Steering and Chassis Parts Brands For Your 1966 Chevrolet Chevy II

Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Chevrolet Chevy II running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Cardone, and even more.

Popular Energy Suspension Steering and Chassis Parts

You’ll find popular Energy Suspension brand products across Tie Rods. All are waiting to get your 1966 Chevrolet Chevy II back on the road. Some of the top-rated Energy Suspension products in these categories are:
Tie Rod Dust Boot
from $9.99
(3)
Tie Rod Dust Boot
Tie Rod End Boots

Top-Rated Imperial Steering and Chassis Parts


If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1966 Chevrolet Chevy II, and some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Coolers
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Quick Connect Coupler
from $11.49
(3)
Quick Connect Coupler
Power Steering Coolers

FAQs for 1966 Chevrolet Chevy II Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the 1966 Chevrolet Chevy II?

Out of 64 Steering and Chassis Parts for the 1966 Chevrolet Chevy II, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $5.99
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.49
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Reservoir Hoses

What are the top-rated 1966 Chevrolet Chevy II Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your 1966 Chevrolet Chevy II based on customer reviews/ratings are:
Bearings
from $15.99
(38)
Bearings
“1976 Cutlass. Seem like a good bearing”
Bulk - 3/8" I.D. Return Hose J189
from $47.49
(17)
Bulk – 3/8" I.D. Return Hose J189
“There is plenty of hose to get the job done”
Pump Complete Rebuild Kit
from $53.99
(14)
Pump Complete Rebuild Kit
“No complaints had all seals and o rings needed for the rebuild”