1966 Chevrolet C20 Pickup Drivetrains
More 1966 Chevrolet C20 Pickup Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1966 Chevrolet C20 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1966 Chevrolet C20 Pickup Drivetrains
Yukon Gear – Dana 60 & Dana 61 Tracloc Clutch Set (Part No.16156)
from
$269.99
Dana 60 & Dana 61 TracLoc clutch set.
Product Features:
See More
Product Features:
- Clutch kit
- Fit Dana Spicer 60 Trac Loc positraction
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Pilot Bearing For 10.5" 14 Bolt Truck, 2.050" O.D. (Part No.18041)
from
$57.99
Pilot bearing for 10.5″ 14 bolt truck, 2.050″ O.D.
Product Features:
See More
Product Features:
- Pilot bearing
- Fits GM 10.5″ 14 bolt truck
- 2.050″ O.D.
Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)
from
$659.99
Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Richmond Gear – RngPnnInstlKt (Part No.83-1034-B)
from
$59.99
RngPnnInstlKt
Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 61 & 70U (Part No.55020)
Yukon Gear – Replacement Yoke For Dana 44-HD, 60, And 70 With A 1310 U/Joint Size (Part No.41022)
from
$233.99
Yukon replacement yoke for Dana 44-HD, 60, and 70 with a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 and 70
- 29 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Bearing Race Driver (Part No.56014)
from
$215.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits HM88510 race
- All steel construction
Yukon Gear – Standard Open Cross Pin Shaft For Four Pinion Design For GM 10.5" 14 Bolt Truck (Part No.33405)
from
$89.99
Standard Open cross pin shaft for four pinion design for GM 14T.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits GM 10.5″ 14 bolt truck
Yukon Gear – Pinion Install Kit For Dana 60 Rear Differential (Part No.13032)
from
$295.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Dana 60, Dana 70, And Dana 80 Strap Kit (Part No.41194)
from
$31.99
Strap kit for 1480 yoke in Dana 60, Dana 70, & Dana 80.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 60, 70, 70U, 70HD and 80
- 1480 u-joint size
- Includes two straps and four bolts
National – Bearings (Part No.HM88510)
from
$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Set Up Bearing (Part No.56039)
from
$276.99
Set-up carrier bearing kit (2 bearings, no races) for Dana 60 and 70. 387A. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 60
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – Standard Open Carrier Case, GM 10.5" 14 Bolt Truck, 4.10 & Down (Part No.20100)
from
$729.99
Product Features:
See More
- Standard open carrier case
- Fits GM 10.5″ 14 bolt truck
- 4.10 and down ratio only
- Does not include spider gears
Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)
from
$3.99
Product Features:
See More
- Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″
Yukon Gear – Spindle Nut For GM 10.5" 14 Bolt Truck, 1.935" I.D., 6 Holes (Part No.33510)
Powertrax – No-Slip Traction System (Part No.9207853005)
from
$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
USA Standard Gear – Master Overhaul Kit Dana 60 Front (Part No.37020)
from
$339.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
Yukon Gear – Set Up Bearing (Part No.56067)
from
$153.99
Set-up bearing (one bearing). HM803146. No return.
Product Features:
See More
Product Features:
- Set up bearing
- Fits HM803146 pinion bearing
- Easily slips on and off pinion journal to allow for pinion depth adjustment
Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)
Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)
Yukon Gear – Spindle Nut Retainer For Dana 60 & 70, 1.830" I.D., 10 Outer TABS (Part No.33477)
from
$10.99
Spindle nut retainer for Dana 60 & 70, 1.830″ I.D., 10 outer tabs. This replaces Spicer part number 30637.
Product Features:
See More
Product Features:
- Spindle nut retainer for Dana Spicer 60, 70, 70U and 70HD
- 1.830″ I.D.
- 10 outer tabs
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-106)
from
$267.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
- Related repair – smart to have on hand when installing a differential ring and pinion
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
USA Standard Gear – Steel Spool For Dana 60 With 35 Spline Axles, 4.56 & Up (Part No.59018)
from
$369.99
Product Features:
See More
- Fits Chrysler Dana Spicer 60 with 35 spline axles
- 4.56 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Motive Gear – Axle Shaft (Part No.MG1774)
from
$168.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.
Product Features:
See More
Product Features:
- AXLE SHAFT 10.5″ 30 SPL. 37 9/16″ R.H.
Popular 1966 Chevrolet C20 Pickup Drivetrains Categories
1966 Chevrolet C20 Pickup Drivetrains
You count on your 1966 Chevrolet C20 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 222 Drivetrains ranging in price from $3.99 to $1,487.99, you’re sure to find everything you need for your 1966 Chevrolet C20 Pickup.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 17 different brands like Valvoline, Spicer, and Felpro. 1966 Chevrolet C20 Pickup Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,208 extensive product reviews on 1966 Chevrolet C20 Pickup Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Bearing with 3.4 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 2.9 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1966 Chevrolet C20 Pickup below to get started!
Top-Rated Drivetrains Brands For Your 1966 Chevrolet C20 Pickup
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Chevrolet C20 Pickup running right for years to come. In our inventory you’ll find brands like Valvoline, Spicer, Felpro, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Universal Joints. All are waiting to get your 1966 Chevrolet C20 Pickup back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1966 Chevrolet C20 Pickup, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1966 Chevrolet C20 Pickup Drivetrains
What are the most purchased Drivetrains for the 1966 Chevrolet C20 Pickup?
Out of 222 Drivetrains for the 1966 Chevrolet C20 Pickup, the most popular in our inventory are:
What are the top-rated 1966 Chevrolet C20 Pickup Drivetrains?
Top-rated Drivetrains for your 1966 Chevrolet C20 Pickup based on customer reviews/ratings are:
from
$44.99
(7)
Universal Joint
“Good product; easier to install; one bad thing is caps fall off easy, seems lite on greese”
