1966 Checker Aerobus Cooling and Climate Controls
More 1966 Checker Aerobus Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1966 Checker Aerobus, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1966 Checker Aerobus Cooling and Climate Controls
Edelbrock – Engine Water Pump Gasket Set for Chevy Small-Block (Part No.7251)
from
$14.99
Edelbrock #7251 Engine Water Pump Gasket Set Chevy Small Block. Is it time to rebuild your Edelbrock mechanical water pump? No problem– these Edelbrock water pump gaskets will keep your water pump leak-free. They are manufactured from quality materials a
Product Features:
See More
Product Features:
- Composite Material
- 2-Pump To Block
- 1-Back Plate-To-Water Pump
- O-Ring
- For SB Chevy
Felpro – Engine Water Pump Gasket (Part No.5152)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Premium – Standard Thermostat: 160 Degrees (Part No.13356)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13358)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Felpro – Engine Water Pump Gasket (Part No.13032)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
ARP Auto Racing – ARP Water Pump Bolt Kit (Part No.134-3203)
from
$18.99
ARP water pump bolt kits are available in either a polished stainless steel or black oxide chromoly finish. They come in your choice of standard hex bolts or compact 12-point fasteners. Secure your water pump in high performance style.
Product Features:
See More
Product Features:
- 7/16″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- Chevy Small Block
- Short Water Pump
ARP Auto Racing – For Use With All V8 Chevy, Hex Style Head Type, Black Oxide, Chrome Moly (Part No.130-3202)
from
$17.99
ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so that is why ARP came up with these super tough bolts. The stainless has the added advantage of being rust and corrosion resistant. it is the fastener of choice.
Product Features:
See More
Product Features:
- Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
- Nominally Rated At 170,000 PSI Tensile Strength
- Made In USA
- Sold As A Kit
Carquest Premium – Radiator Cap: 13 PSI (Part No.10329)
from
$10.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Edelbrock – Water Pump Small-Block Victor Pro (Part No.8819)
from
$353.99
For circle track and endurance racing engines. Black anodized finish with 0.10 inch thicker rear cover. Impeller is larger than others for max pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block with in 1 p
Product Features:
See More
Product Features:
- For Circle Track And Endurance Racing Engines
- Black Anodized Finish w/0.10-in Thicker Rear Cover
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution To Both Sides Of Block With 1pc
- Only Flows in One-Direction for Optimum Efficiency
Edelbrock – Competition Water Pump for Small-Block – 3/8" NPT Pipe Aux Outlet (Part No.8817)
from
$346.99
For circle track and endurance racing engines. Black anodized finish with 0.10 inch thicker rear cover. Impeller is larger than others for max pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of black with in 1 piece. Only flows in one-direction for optimum efficiency.
Product Features:
See More
Product Features:
- For Circle Track And Endurance Racing Engines
- Black Anodized Finish w/0.10-in Thicker Rear Cover
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution To Both Sides Of Block With 1pc
- Only Flows in One-Direction for Optimum Efficiency
Edelbrock – Competition Water Pump for Small-Block – 8 AN Pipe Aux Outlet (Part No.8816)
from
$356.99
For circle track and endurance racing engines. Black anodized finish with 0.10 inch thicker rear cover. Impeller is larger than others for max pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of black with in 1 piece. Only flows in one-direction for optimum efficiency.
Product Features:
See More
Product Features:
- For Circle Track And Endurance Racing Engines
- Black Anodized Finish w/0.10-in Thicker Rear Cover
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution To Both Sides Of Block With 1pc
- Only Flows in One-Direction for Optimum Efficiency
Felpro – Engine Coolant Outlet Gasket (Part No.35062)
from
$3.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
National – Bearings (Part No.907257)
from
$48.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Ball Bearing (Part No.S-907257)
from
$22.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Victor Reinz – Engine Coolant Outlet Gasket (Part No.71-13524-00)
from
$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – WATER OUTLET GASKET (Part No.35562 T)
from
$19.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environment
- PermaDryPlus water outlet gaskets utilize rigid carrier construction and silicone sealing beads to ensure a long-lasting seal, including those with warped housing flanges
- Validated for fit, form, and function
- Quality that you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Felpro – Engine Coolant Outlet Gasket (Part No.35063)
from
$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
MAHLE Original – ADHESIVE WTR OUT (Part No.C24109)
from
$1.49
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – WATER PUMP MOUNTING GASKET SET (Part No.ES 73030)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Popular 1966 Checker Aerobus Cooling and Climate Controls Categories
1966 Checker Aerobus Cooling and Climate Controls
You count on your 1966 Checker Aerobus to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 25 Cooling and Climate Controls ranging in price from $1.49 to $356.99, you’re sure to find everything you need for your 1966 Checker Aerobus.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 9 different brands like Carquest Premium, Felpro, and Motorad UltraStats. 1966 Checker Aerobus Cooling and Climate Controls start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 462 extensive product reviews on 1966 Checker Aerobus Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Standard Thermostat: 160 Degrees with 4.8 stars and Ball Bearing with 2.3 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1966 Checker Aerobus below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1966 Checker Aerobus
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1966 Checker Aerobus running right for years to come. In our inventory you’ll find brands like Carquest Premium, Felpro, Motorad UltraStats, and even more.
Popular Felpro Cooling and Climate Controls
You’ll find popular Felpro brand products across Engine Cooling Parts. All are waiting to get your 1966 Checker Aerobus back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Carquest Premium Cooling and Climate Controls
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1966 Checker Aerobus, and some of our most reviewed Carquest Premium parts include:
FAQs for 1966 Checker Aerobus Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1966 Checker Aerobus?
Out of 25 Cooling and Climate Controls for the 1966 Checker Aerobus, the most popular in our inventory are:
What are the top-rated 1966 Checker Aerobus Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1966 Checker Aerobus based on customer reviews/ratings are:
