1966 AMC Ambassador Car Parts & Accessories

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life.  Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

• Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
• Developed with anti-wear technology to help improve transmission durability
• Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05 antifreeze/coolant uses the highest-quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications.
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA

Product Features:

• FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
• HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
• IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
• ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations

ZEREX G05® is the automaker approved original chemistry used in newer Ford®, Chrysler® and Mercedes-Benz® automotive and diesel engines. Its Hybrid Organic Acid Technology (HOAT) chemistry combines the best of conventional and organic acid-based chemistry to provide the ultimate protection against rust and corrosion. ZEREX G05® antifreeze/coolant uses the highest quality virgin ethylene glycol for freeze and boil over protection and a hybrid organic acid corrosion inhibitor package to protect your engines from liner pitting and corrosion.

Product Features:

• Automaker approved technology. Provides protection for 5 years / 150,000 miles in light duty applications and 3 years / 300,000 miles in heavy duty applications
• Formulated for long life performance
• Low-silicate, low-pH and phosphate-free formula
• Helps protect all cooling system metals, including aluminum

Prestone All Vehicles antifreeze+coolant (ready to use) is truly designed to work with all vehicles; all makes, models, years and fluid colors. It is designed to work with all new engines while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. Internal damage can cause engine part failure, leading to expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs/300,000 miles and also to protect the internal parts of the engine for 10yrs/300,000, officially patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 10 year/300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Prestone All Vehicles antifreeze+coolant (concentrate) is truly designed to work with all vehicles; all makes, models, years and fluid colors. It is designed to work with all new engines, while also being backwards compatible improving protection in all older engines. The patented Cor-Guard technology (the best innovation in the category in decades) instantly protects parts from corrosion, buildup, pitting, scaling, rust and other damage. Prestone’s Antifreeze + Coolants are designed to the highest standards using state of the art technology. These fluids are specially designed to not only manage the engine temp and protect from freezing up (like competitors), but they also protect the engine from damage. internal damage can cause engine part failure, expensive repairs and serious inconveniences . Avoid costly repairs and vehicles in the shop with Prestone All Vehicles antifreeze+coolant. This fluid is designed to last 10yrs/300,000 miles and also to protect the internal parts of the engine for 10yrs/300,000, officially patented by Prestone.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 10 year/300,000 mile Extended life formula.
• Includes patented Prestone CorGuard technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 300,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG and water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

FRAM Extended Life AMAM Concentrate is compatible with any antifreeze/coolant in any vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. FRAM Concentrate meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Works with all fluid colors; All OAT, POAT, HOAT and IAT.
• Longer Engine Life Guarantee – 5 year/150,000 mile Extended life formula.
• Includes patented technology, the best advancement in cooling system parts protection that protects against rust and corrosion of all cooling system metals, including aluminum. Protection for 150,000 miles.
• Concentrate formula. Must mix with distilled to the desired mix ratio of EG and water. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

PEAK Antifreeze + Coolant Concentrate is specially engineered to deliver guaranteed superior lifetime protection. Its advanced universal formula contains a proprietary blend of 10X the scale-fighting inhibitors coupled with robust organic additives to fight against the damaging effects of scale deposits and corrosion. PEAK Antifreeze + Coolant is free of 2-EHA, silicate, nitrite, borate, and amines, ensuring maximum cooling system performance for 10 years/300,000 miles. It is compatible for use with any color or type of antifreeze/coolant in the system.

Product Features:

• Specially formulated to deliver Superior Lifetime Protection against damaging scale and corrosion
• Contains 10X the scale-fighting inhibitors to ensure maximum cooling system performance
• Provides more coverage for 10+ years/300,000+ miles of service
• Universal formula is compatible with any color or type of antifreeze/coolant
• Meets the performance requirements of ASTM D3306 and D4985

FRAM Extended Life AMAM 50/50 is compatible with any antifreeze/coolant in any vehicle with aluminum or other cooling system metals. The formulas have a blend of long-lasting inhibitors to guard against temperature extremes and the effects of rust, corrosion, and premature water pump failure. Top-off your cooling system with FRAM Extended Life AMAM 50/50, which is a blend of 50% antifreeze and 50% demineralized water. FRAM 50/50 meets or exceeds ASTM D3306 and D4985 for corrosion protection for cars and light duty trucks, while providing reliable freeze-up and boil-over protection.

Product Features:

• Formulated to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT
• 5 year/150,000 mile Extended life formula.
• Meets or exceeds ASTM D3306 and D4985 for corrosion protection.
• Ready to Use formula (prediluted to a 50% Eg and 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

FRAM Conventional Green Concentrate is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. When used as directed, the Prime Green Concentrate Low Silicate formula provides full protection for a minimum of one year.

Product Features:

• Low Silicate Formula.
• When used as directed, will provide protection for a minimum of 1 year
• Meets or exceeds ASTM requirements for cars, light duty trucks
• Concentrated formula. Must mix with high quality (distilled/deionized) water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

Antifreeze Conventional Green 50/50 is an ethylene glycol-based product for use in car and light duty trucks that are already using a conventional coolant. The inhibitors prevent rust, corrosion, and provide freeze-up and boil-over protection. Prime Green 50/50 can be used to top-off cooling systems in vehicles using conventional AF/C, will not harm rubber parts, and meets ASTM D3306 and D4985 standards.

Product Features:

• Low Silicate Formula.
• When used as directed, will provide protection for a minimum of 1 year
• Meets or exceeds ASTM requirements for cars, light duty trucks
• Ready to Use formula (prediluted to a 50% Eg & 50% distilled water mix). Perfect for small volume top-off or complete drain and refill of the cooling system

Product Features:

• Reduces heat & wear
• Eliminates TQ converter shudder & clutch pack chatter
• For all automatic transmissions & 4×4 transfer cases

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Concentrated formula. Must mix with high quality water to the desired ratio. Can be used for top-off, complete drain and refill or flush and refill of the cooling system.

All Antifreeze + Coolants are not the same. Prestone MAX antifreeze + coolant is Guaranteed to provide maximum engine protection in all Vehicle Makes, Models and Years. It delivers the widest range of temperature protection, industry leading protection from engine damaging rust and corrosion and the longest lasting protection in the industry. Trust Prestone for maximum, year-round engine protection.

Product Features:

• Can top off or replace all antifreeze + coolant colors and formulations in all Vehicle Makes, Models and Years – Guaranteed.
• Our patented, advance formula provides extreme temperature protection from the worst of winter deep freezes and scorching summer heat.
• We deliver industry leading protection from engine damaging rust, corrosion and buildup. Prestone MAX completely stops the formation of rust and corrosion for better engine performance and longer engine life.
• Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
• This is a Concentrated Formula. Must mix with high quality water to the desired ratio.

Prestone Platinum antifreeze+coolant is Prestone’s best universal antifreeze and coolant product. Guaranteed to work with all vehicles; all makes, models, years and fluid colors. 15+ years, 350,000 miles of protection; the fluid is Guaranteed for the life of your vehicle. This advanced product delivers Extreme Protection against both freezing temperatures (-50 deg.) and overheating/boiling over of the engine (+268 deg.). Prestone Platinum utilizes industry leading protection from engine damaging rust, corrosion, buildup and scale. While ordinary antifreeze coolant only focuses on the basic corrosion coverage, Prestone Platinum goes farther, adding our most advanced cooling system protection, allowing the system to run optimally, like when it was new. Internal buildup and corrosion damage can cause engine part failure or clogging, leading to expensive repairs and inconveniences. Prestone Platinum helps you avoid costly repairs and vehicles in the shop. This extended life coolant is Guaranteed to work with all new engines and engine technology, while also being backwards compatible, improving protection in all older engines. Prestone Platinum antifreeze+coolant – Year Round Protection.

Product Features:

• Guaranteed to work with All Vehicles. Universally works with all fluid colors; All OAT, POAT, HOAT and IAT; G05, G11, G12, G12++, G13, G30, G40, and GG40. For all engines and engine sizes, new and older engines.
• 15+ year/350,000 mile Extended life formula. The fluid is guaranteed for the life of your vehicle
• Includes our most advanced Prestone Cor-Guard technology, unmatched cooling system parts protection that protects against engine damage; rust, corrosion, scale, build-up and clogging. Protection for 15+yrs/350,000 miles.
• Ready to Use formula – Prediluted 56/54. Perfect for small volume top-off or complete drain and refill of the cooling system

PS FLUID

All Antifreeze + Coolants are not the same. Prestone MAX antifreeze + coolant is Guaranteed to provide maximum engine protection in all Vehicle Makes, Models and Years. It delivers the widest range of temperature protection, industry leading protection from engine damaging rust and corrosion and the longest lasting protection in the industry. Trust Prestone for maximum, year-round engine protection.

Product Features:

• Can top off or replace all antifreeze + coolant colors and formulations in all Vehicle Makes, Models and Years – Guaranteed.
• Our patented, advance formula provides extreme temperature protection from the worst of winter deep freezes and scorching summer heat.
• We deliver industry leading protection from engine damaging rust, corrosion and buildup. Prestone MAX completely stops the formation of rust and corrosion for better engine performance and longer engine life.
• Prestone Max is guaranteed to protect your vehicle for 15+ years and/or 350,000 miles. It’s the longest fluid life in the industry.
• This is a Ready to Use formula – prediluted 56/44.

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

• Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

• Includes three quarts of conventional oil

Help keep positraction chatter down with posi additive from Yukon Gear & Axle.

Product Features:

• positraction additive
• For use in any clutch-style limited slip

NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK’s V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• Enhanced Ignitability: The V-cut nickel alloy center electrode and concave ground electrode design of NGK V-Power spark plugs provide quicker starts and smoother idle.
• OE Application Specific: Engineered specifically for Original Equipment (OE) applications, ensuring compatibility and reliable performance.
• V-Groove Tip Design: The unique V-Groove tip design of the NGK V-Power Nickel Spark Plug enhances ignitability and overall engine performance.

The Copper Plus spark plug delivers dependable performance and durability, making it an ideal choice for maintaining your engine’s efficiency. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. Its nickel center electrode tip and flat seat design enhance reliability while meeting ISO and SAE Standards for proven performance. Built with superior corrosion resistance, this spark plug is designed to withstand harsh conditions, ensuring long-term functionality. As a standard replacement grade type with a resistor, it offers compatibility with a wide range of vehicles. Whether you’re looking for improved conductivity or reliable ignition, this spark plug provides excellent value and performance for your engine’s needs.

Product Features:

• Copper Plus – Dependable Performance and Durability
• Copper core center electrode allows for accurate control of heat range for longer life
• Superior corrosion resistance
• Built to ISO and SAE standards for proven performance
• Built to ISO and SAE standards for proven performance
• Reliable Nickel Center Electrode Tip: Featuring a nickel center electrode tip and flat seat type, this spark plug enhances reliability and helps maintain your engine’s efficiency.

Autolite Copper spark plugs are expertly crafted to ensure quick starts and reliable performance for your vehicle or application. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, while the high nickel alloy center and ground electrode deliver extended life and durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, providing superior strength under demanding conditions. With a corrosion-resistant nickel-plated shell, these spark plugs are built to withstand the test of time. Designed for efficiency, they contribute to improved fuel economy, helping you save money at the pump, while their advanced copper technology ensures smoother acceleration for a more enjoyable driving experience. With a standard center electrode design and mid projection, these spark plugs offer dependable performance and compatibility for regular-grade applications. Autolite Copper spark plugs are the ideal choice for drivers seeking durability, efficiency, and enhanced engine performance.

Product Features:

• The copper core center electrode aids in thermal control and improves resistance to fouling.
• Its specially engineered high nickel alloy center and ground electrode provides extended life.
• The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
• Good Fuel Economy: Engineered for efficiency, these spark plugs help improve fuel economy, saving you money at the pump.
• Smooth Acceleration: Experience smoother acceleration with Autolite’s advanced copper spark plug technology.

Autolite Copper spark plugs are designed to provide reliable performance and efficiency for your vehicle. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are built for extended life, while the high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation strength. With a nickel-plated shell, these spark plugs resist corrosion, offering long-lasting durability. Engineered for quick starts and smooth acceleration, they enhance your driving experience while promoting better fuel economy, helping you save at the pump. The mid-projection standard center electrode design and flat seat type ensure compatibility with a wide range of applications, making these spark plugs a dependable choice for maintaining your vehicle’s performance.

Product Features:

• The copper core center electrode aids in thermal control and improves resistance to fouling.
• Its specially engineered high nickel alloy center and ground electrode provides extended life.
• The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
• Quick Starts and Smooth Acceleration: The Autolite Copper Spark Plug ensures quick engine starts and smooth acceleration, enhancing your driving experience.
• Good Fuel Economy: Engineered for efficiency, these spark plugs help improve your vehicle’s fuel economy, saving you money at the pump.

Champion Platinum Power spark plugs are engineered to deliver exceptional performance and durability, making them an ideal choice for maintaining peak engine efficiency. Featuring a platinum center electrode, these spark plugs ensure long-lasting reliability and consistent performance. The fine-wire center electrode enhances ignitability, while the V-trimmed ground electrode sharpens spark focus for optimal combustion. Constructed with exclusive Heat-Active alloy, the electrodes quickly reach and maintain the ideal operating temperature, ensuring smooth engine operation under various conditions. The platinum-tipped center wire resists wear and helps maintain the proper gap specification throughout the plug’s lifespan. Designed as a standard replacement with a flat seat type and integrated resistor, these spark plugs are a perfect OE replacement for a wide range of engines. With a nickel ground electrode tip and a focus on precision, these spark plugs provide powerful performance and long-term value for your vehicle.

Product Features:

• Platinum Power- Premium Spark Plug. Powerful Performance.
• Platinum center electrode for long life
• Fine-wire center electrode for greater ignitability
• V-trimmed ground electrode promotes sharper spark focus
• Heat-Active alloy allows electrodes to reach optimal temperature
• Platinum tipped center wire resists wear and helps to maintain proper gap spec over life of the plug
• Integrated Resistor and Flat Seat Type: Equipped with an integrated resistor and flat seat type, making it an ideal OE replacement for various engines.

Autolite Platinum spark plugs are crafted for superior performance and durability, making them ideal for older engine applications. Featuring a platinum center electrode firing tip, these spark plugs ensure quicker firing, smoother starts, better acceleration, and improved fuel efficiency. The platinum firing tip prevents gap erosion, extending the service life, while the high alumina ceramic insulator enhances thermal conductivity and insulation for added strength. A multi-rib insulator design prevents flash-over, ensuring reliable operation, and the nickel-plated shell resists corrosion for long-lasting durability. With a mid-projection standard center electrode and a flat seat type, these performance-grade spark plugs deliver consistent results. The combination of platinum and nickel materials in the electrode tips further boosts reliability, making them a dependable choice for maintaining engine efficiency and longevity.

Product Features:

• Engineered with a platinum firing tip that prevents gap erosion for longer service life.
• Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
• The multi-rib insulator prevents flash-over.
• Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
• The combination of platinum and nickel materials in the electrode tips enhances reliability, ensuring consistent engine performance and efficiency over time.

The Iridium Power Spark Plug features the world’s smallest iridium center electrode at just 0.4mm, delivering unmatched spark precision for maximum combustion efficiency. Engineered with patented 360-degree laser welding, it ensures durability and reliability even under extreme conditions, withstanding temperatures over 4000 Deg F. The U-groove and taper-cut ground electrode design enhances flame propagation, optimizing engine performance. Its burnished nickel plating provides superior resistance to high temperatures and corrosion, making it ideal for long-term use. Designed for a wide range of applications, including classic and collector cars, this spark plug offers superior performance with increased horsepower and improved fuel efficiency. Requiring 5,000 volts less to fire compared to conventional plugs, it ensures reliable starts and fewer misfires, even under heavy loads. Constructed with a durable iridium center electrode tip and a flat seat type, the Iridium Power Spark Plug guarantees long-lasting performance, making it a top choice for drivers seeking efficiency, power, and reliability.

Product Features:

• World’s smallest Iridium Center Electrode (0.4mm) for improved spark for maximum combustion
• Patented 360-degree laser welding assembly process
• U-groove and taper cut ground electrode to maximize flame propagation.
• Withstands temperatures greater than 4000 degree Fahrenheit
• Burnished nickel plating for high temperature endurance and superior corrosion resistance
• Wide range of part numbers for thousands of applications, including classic and collector cars
• Iridium Power
• Superior Performance: Patented technology allows the Iridium Power plug to outperform any other spark plug on the market, delivering more horsepower and better fuel efficiency.
• Low Voltage Requirement: Requires 5,000 volts less to fire compared to conventional spark plugs, making it highly efficient and reliable under extreme conditions.
• Enhanced Engine Starts: Experience faster and easier engine starts with fewer misfires, even under heavy loads, thanks to the advanced design of the DENSO Iridium Power spark plug.
• Durable Iridium Material: Constructed with a durable iridium center electrode tip and a flat seat type, ensuring long-lasting performance and reliability.

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

• 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Thermoplastic housing withstands heat stress for enhanced durability
• External core made from oriented silicon steel ensures durability and longevity
• Stainless steel spring resists corrosion
• Tin-plated brass terminals improve electrical contact and protect against corrosion

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

• High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
• The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
• All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
• Offering thousands of high-quality pigtails & sockets for nearly every electrical job

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• Triple Gasket Sealing: Prevents combustion gas leakage, ensuring efficient engine performance.
• Conventional Tip Design: The B10EG model features a conventional tip design, optimized for racing conditions to provide reliable ignition and performance.

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

• Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
• Incl. both socket-style and spark plug-style boots and terminals
• Includes Mini-Stripper-Crimper For Factory Style Crimps
• Size Includes: [2]48/50/56 in./[3] 32 in. Wires/Boots/Terminals
• Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
• Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

• Most Advanced Wire By Mallory
• RFI Suppression
• High Temperature Silicone Jacket
• Withstands Over 500+F
• Come In Ready To Use Kits
• Extra Long Kits

NGK Standard spark plugs (in the iconic NGK ‘yellow box’ packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK’s legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.

Product Features:

• ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
• RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
• NGK’s OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
• SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
• COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
• TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
• Triple Gasket Sealing: Prevents combustion gas leakage, ensuring efficient engine performance.

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

• Black Onyx coating helps reduce corrosion
• Copper core provides great heat transfer and helps maximize plug durability
• Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
• Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
• Available for use in Marine applications
• Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
• Premium aftermarket replacement part
• Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

• High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
• The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
• All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
• Offering thousands of high-quality pigtails & sockets for nearly every electrical job

The Spark Plugs are the product of years of fundamental research in the combustion field. The unique patented electrode configuration of these new The spark plugs increases the amount of combustion pressure created during each power stroke of an engine, which results in a marked increase in power output, fuel economy, and reduced emissions in all gasoline engines. E3.46 is a 14mm, 0.750 reach plug with a gasket seat. It fits a wide variety of applications from the 60s to early 90s, especially import. E3.46 is widely stocked in automotive retail stores. The automotive plugs have three legs securing the Diamond FIRE electrode to the shell. This allows for excellent heat transfer, and helps to create more turbulence in the cylinder. The patented Diamond FIRE side wire is proven to increase power, reduce fuel consumption and improve hydrocarbon emissions in long-term use.

Product Features:

• E3’s Diamond Fire edge to edge ground electrode provides maximum performance with increased efficiency and a faster more complete burn.
• Smoother Acceleration & Idle – The faster flame initiated by the spark plug results in a more complete burn of the ingested fuel charge. More pressure is created against the piston more fuel is put to work
• Energy – Power output improved up to 6% on average in the typical operating ranges. Results will vary.
• Efficiency – The “diamond shaped” side wire electrode projects the combustion spark in a way that more quickly ignites the air/fuel mixture, thereby creating a significantly faster and larger flame kernel. The result is that more fuel is put to work durin
• E3’s patented Diamond Fire Technology provides a cleaner burning combustion, which translates into fuel savings and reduced engine carbon deposits
• The Spark Plugs are pre-gapped at the factory and cannot be adjusted.
• Wide Compatibility: The E3.46 spark plugs are 14mm with a 0.750 reach and a gasket seat, making them suitable for a wide range of applications from the 1960s to early 1990s, especially for import vehicles.
• Widely Available: The E3.46 spark plugs are widely stocked in automotive retail stores, ensuring easy availability for consumers.

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

• 500 Ohms/ft Of Resistance
• 550 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• High RFI Suppression For Street And Strip Use
• Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles
• 8mm High Gloss Silicone Jacket

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

• 7mm Yellow Silicone Jacket
• Street-driven Applications
• Copper Core
• Orange Spark Plug Boots
• Pre HEI Vehicles
• Universal Wire Set

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

• Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
• Distributor cap has aluminum terminals to match OE performance.
• The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

• 500 Ohms/ft Of Resistance
• 550 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• High RFI Suppression For Street And Strip Use
• Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles
• 8mm High Gloss Silicone Jacket

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

• 7mm And 8mm High Gloss Silicone Jacket
• 450 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• RFI Suppression For Street Driven Applications
• Custom-fit Universal And Import Coverage
• High-strength Fiberglass Braid Construction
• Pre And Post HEI Vehicles

BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:

• 100% pure copper windings in primary and secondary bobbins improve durability and provide higher resistance to internal shorts and dielectric breakdown
• Thermoplastic housing withstands heat stress for enhanced durability
• Internal core made from grain oriented electrical steel limits loss factor within magnetic circuit to reduce heat and ensure coil endurance
• External core made from oriented silicon steel ensures durability and longevity
• Stainless steel spring resists corrosion

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

• Most Advanced Wire By Mallory
• RFI Suppression
• High Temperature Silicone Jacket
• Withstands Over 500+F
• Come In Ready To Use Kits
• Extra Long Kits

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

• Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
• Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
• Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
• Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

The brake hardware should be inspected and replaced regularly to ensure reliable, efficient performance. The hold down spring top cups are designed to provide direct and simple replacement.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Fast and efficient replacement
• Eliminates heat and corrosion deterioration

Hardware consists of a variety of parts designed to assist in restoring your brake system such as, Anti-rattle clips, seals, pins, and dust boots along with drum shoe return springs, hold down springs, and adjuster assemblies, help to maintain consistent, balanced braking. Change your hardware with the brake shoes to ensure maximum performance. Industry experts agree – When brake friction materials are ready to be replaced, the hardware should also be replaced.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Contains all the necessary hardware for easy installation
• Manufactured to restrain high tolerances with quality materials
• Helps deliver a quieter, more efficient braking system
• Restores brakes to like-new performance

Brakes are designed as a system and all the parts need to work together for best performance. Parking brakes hold the vehicle in place when the vehicle is parked. Because the parking brake is so important, you want to be sure all it’s hardware and components are in good shape.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured to meet your expectations for a perfect fit, form and function
• Prevents uneven braking
• Restores brakes to like new performance

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Prevents noise and premature wear
• Manufactured with quality materials to suppress high stress levels
• Restores brakes to like-new performance

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured to restrain high tolerances with quality materials
• Direct replacement for a proper fit
• Helps deliver a quieter, more efficient braking system

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This automotive brake hydraulic hose was precision-engineered to match the fit, function and performance of the original brake hose on specific vehicles and positions to ensure safe, long-lasting durability as part of a complete brake repair.

Product Features:

• Ideal replacement – precision-engineered to match the performance of the original brake hose on specific vehicles
• Position-specific – manufactured to precise measurements to provide an exact fit and easy installation
• Quality assured – materials tested to exacting government-regulated safety and durability standards
• Durable design – made with EPDM rubber and specially coated, corrosion-resistant fittings
• Brand may vary by location

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals.

Product Features:

• Corrosion resistant coating for long-lasting durability against harsh roads
• Direct replacement for a proper fit

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

• Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
• Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
• Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
• Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

• Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
• Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
• Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
• Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

• Wheel cylinders match what was originally installed on the vehicle.
• Each cylinder matches OE for form, fit and function and material
• Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
• All bleeder screws are coated providing extra protection
• Rubber components are manufactured in house using the latest formula EPDM material.
• Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
• All casting machining is done by computer programed CNC machines.
• Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

Assemblies match what was originally installed on the car from OE for quality, fit, function and material.

Product Features:

• Wheel cylinders match what was originally installed on the vehicle.
• Each cylinder matches OE for form, fit and function and material
• Wheel cylinders provide leak-free performance by providing the highest quality resistance to heat, corrosion and leakage
• All bleeder screws are coated providing extra protection
• Rubber components are manufactured in house using the latest formula EPDM material.
• Wheel cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
• All casting machining is done by computer programed CNC machines.
• Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Contains all the necessary hardware for easy installation
• Manufactured to restrain high tolerances with quality materials
• Maintains safe movement and effective stopping performance
• Helps deliver a quieter, more efficient braking system
• Coated to eliminate heat and corrosion deterioration

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Contains all the necessary hardware for easy installation
• Manufactured to restrain high tolerances with quality materials
• Maintains safe movement and effective stopping performance
• Helps deliver a quieter, more efficient braking system
• Coated to eliminate heat and corrosion deterioration

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this kit, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span and maximizes performance of the Drum Brakes
• Manufactured with quality materials to suppress high stress levels

This direct replacement drum brake wheel cylinder was specifically engineered to match the fit, function and performance of the original wheel cylinder on particular vehicles. It is manufactured and tested for quality assurance.

Product Features:

• Ideal replacement – specifically engineered to be direct match for original drum brake wheel cylinder on particular vehicles
• Cost-effective fix – replacement of cylinder while servicing drum brakes is fastest, surest way to ensure brake performance
• Quality materials – made with high-quality EPDM rubber cups and boots for long-lasting performance
• Professionally tested – wheel cylinder bores are surface-tested to ensure an optimum sealing surface for the pressure cups

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design. 
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

The components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – the components in this drum brake wheel cylinder kit are designed to match the original parts required to repair the wheel cylinder on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals to prevent negative comebacks.

Product Features:

• Manufactured to restrain high tolerances with quality materials
• Helps deliver a quieter, more efficient braking system
• Maintains safe movement and effective stopping performance
• This part matches Original Equipment (OE) quality specifications

Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime.  Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:

• Wearever Brake Shoes come bonded or riveted based on OE design. 
• Wearever Brake Shoes are coated to prevent rust.
• Wearever Brake Shoes are 100% New not remanufactured.
• Brand may vary by location

Brakes are designed as a system and all the parts need to work together for best performance. The braking system is arguably its most important system, so you want to be sure it’s working properly at all times. With this tool, you can be sure the brake adjustments are occurring at the proper intervals to prevent comebacks.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Manufactured to meet your expectations for a perfect fit, form and function
• Minimizes drag to improve gas mileage
• Eliminates heat and corrosion deterioration
• Restores brakes to like-new performance
• Helps deliver a quieter, more efficient braking system

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

• HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
• VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
• PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
• EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
• EASY TO REMOVE: Fast and easy Wrench-Off removal
• HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
• HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE? Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance. Full synthetic or highly embossed media for superior strength and dirt holding capacity; Blocks up to 99% of damaging dirt, soot and debris from entering your engine. Optimizes engine airflow with precision fit polyurethane framingHelps improve acceleration and boost engine efficiency. Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability. Meets or exceeds OE specifications; Trusted OE supplier

Product Features:

• Full synthetic or highly embossed media for superior strength and dirt holding capacity
• Blocks up to 99% of damaging dirt, soot and debris from entering your engine
• Optimizes engine airflow with precision fit polyurethane framing
• Helps improve acceleration and boost engine efficiency
• Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability
• Meets or exceeds OE specifications; Trusted OE supplier

Carquest Premium Oil Spin-on Filters protect your engine by removing contaminants, such as dirt, metal particles, and sludge, from your engine oil. These filters effectively remove contaminants that can cause significant wear and damage to critical engine components. The spin-on design screws directly onto a mounting head, allowing for easy servicing and replacement. By keeping the oil clean, these filters help ensure proper lubrication and cooling, reduce friction and help extend engine life. Carquest Premium Oil Spin-on Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• Includes Anti-Drainback Valve

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

CARQUEST Premium Oil Filters give you the level of quality and performance from the trusted CARQUEST name.

Product Features:

• 99.5% efficiency rating at 20 microns
• Blended media proven for up to 10,000 miles in taxi cab fleet testing
• High efficiency and durable cellulose/synthetic blended media for longer drain intervals
• Silicone anti-drainback valve has 3X the durability verses nitrile for engine start-up protection
• Metal end caps
• Internally lubricated gasket
• Precision coil spring relief valve

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

• Protection for up to 5,000 miles
• Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
• Nitrile anti-drain back valve for engine start-up protection
• Lathe cut nitrile sealing gasket prevents leaks
• Double fluted spiral wound center tube allows maximum flow and provides additional strength
• Solid steel baseplate provides additional strength to resist leakage
• Meets requirements for maintaining new vehicle warranties

Carquest Premium oil filters are built for durability, utilizing enhanced components to protect engines for the extended drain intervals of modern vehicles using conventional or synthetic lubricants. Our oil filters are built with synthetic blend media that provides 2X the capacity and up to 10,000 miles of protection. Carquest Premium filters feature silicone sealing gaskets for better performance in extreme temperatures. Carquest Premium oil filters meet or exceed original equipment (O.E.) specifications and meet the requirements for maintaining a new vehicle warranty.

Product Features:

• Protection for up to 10,000 miles
• Synthetic blend media provides 99.5% efficiency at 20 microns and 2X capacity vs. Standard filters
• Solid metal end caps are designed to be long lasting
• Silicone anti-drain back valve for engine start-up protection
• Heavy-duty steel baseplate provides additional strength to resist leakage
• Heavy gauge steel canister withstands high pressure operating conditions
• Silicone sealing gasket performs better in extreme temperature conditions and longer drain intervals (silicone gasket is new feature introduced as a running change)
• Meets requirements for maintaining new vehicle warranties

CARQUEST Standard Oil Filters give you the level of quality and application you have come to expect from the CARQUEST name.

Product Features:

• 94.1% efficiency rating at 20 microns
• Meets new car warranty requirements
• Precision coil spring relief valve
• Nitrile anti-drainback valve for engine start-up protection
• Metal end caps
• Cellulose/synthetic blended media
• Internally lubricated gasket

Carquest Premium engine air filters are designed to meet OE fit, form and function for optimal filtration and engine protection. High-quality paper, enhanced bonding, and reinforced metal screen backing give Carquest Premium air filters the added strength and durability that modern engines demand. Built to meet or exceed original equipment standards, Carquest Premium air filters provide exceptional engine protection and optimal performance in all driving conditions.

Product Features:

• Precision engineered to match OE fit, form and function
• Media provides 99% filtration efficiency and larger capacity
• Sealing materials are designed for each application to ensure a positive seal
• Reinforced metal screen backing with anti-rust coating on applicable applications
• Built to withstand high CFM conditions of forced induction engines

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Includes all parts needed to complete the repair

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Remote mount filter kit
• For use when relocation of the oil filter is necessary
• Comes with all necessary hardware except hoses
• Kit comes with all necessary hardware except hoses
• 3 models available for a wide range of applications

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

AT IN-LINE FLTR 5/16

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Carquest Premium Air Filters ensure your equipment runs smoothly with our high-quality filtration media that prevents airborne contaminants, such as dust, dirt, and debris, from reaching your combustion chamber. Protecting critical engine components from wear and damage helps maintain optimal engine power, improve fuel efficiency, and extend engine life – keeping your equipment performing at its best. Carquest Premium Air Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Axial seal primary air filter
• Positive urethane sealing design, Application Specific Media

AUTO TRANS FLTR KT

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

AT FLTR 5/16 D BARB

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Positive crankcase ventilation (PCV) valves are designed to recirculate combustion fumes from the crankcase into the intake so they can be burned again, resulting in lower emissions. Carquest Premium PCV valves are built to meet or exceed original equipment (O.E.) specifications and undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium PCV valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

• Designed to meet or exceed OE specifications for fit, form and function
• O-rings or seals are included if required for installation
• Extensive design validation testing and 100% end-of-line tested
• Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Carquest Premium Fuel Cartridge Filters protect your engine and fuel system by removing dirt, rust, and other impurities from the fuel before it reaches your engine fuel system. These filters effectively remove contaminants to prevent clogging and damage to fuel injectors, pumps and other critical engine components. The cartridge design installs in a housing, allowing for easy servicing and replacement. By keeping fuel clean, these filters help ensure optimal combustion, improve engine efficiency, and reduce emissions. Carquest Premium Fuel Cartridge Filters are designed to meet or exceed the performance requirements of the Original Equipment Manufacturer (OEM).

Product Features:

• Conventional cartridge fuel filter
• Made in USA

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

• Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
• Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience