1965 GMC PB2500 Series Transmission Parts
More 1965 GMC PB2500 Series Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1965 GMC PB2500 Series, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1965 GMC PB2500 Series Transmission Parts
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)
from
$54.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Driveworks – Oil Seal (Part No.S-9613S)
from
$4.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT OIL PAN GASKET (Part No.CG-10)
from
$15.99
AT OIL PAN GASKET
B & M – Bracket and Lever Kit (Part No.70497)
from
$95.99
Bracket and Lever Kit APPLICATION: For GM 1962 to 1973 Powerglide without T.V. Hole.
Product Features:
See More
Product Features:
- Incl. Cable Bracket/Shift Lever/Spacers
- Incl. Swivel/Cotter Pin/Nut/Bolt/Selector Shaft
ATP – AT OVERHAUL KIT (Part No.CGS-17)
from
$97.99
AT OVERHAUL KIT
Driveworks – Oil Seal (Part No.S-6712NA)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Felpro – Manual Transmission Gasket Set (Part No.TS 5100)
from
$13.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
B & M – Master Overhaul Kit For Powerglide Transmission (Part No.21040)
from
$399.99
The B&M Master Racing Overhaul Kit includes all gaskets, seals, bushings and high performance friction materials. No transbrake body gaskets or instructions included.
Product Features:
See More
Product Features:
- Complete High Perf. Or Racing Trans. Overhaul
- Includes Only OEM Valvebody Gaskets
- Instructions Not Included
B & M – Shifter Accessory, Pro Stick Aluminum Cover (Part No.80717)
from
$121.99
Replacement aluminum cover for your B&M Pro Stick.
Product Features:
See More
Product Features:
- Pro Stick; Brushed Aluminum Cover
- Aluminum Cover
- Replacement Part
- Sold individually
- B&M quality
National – Bearings (Part No.307-L)
from
$39.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Felpro – Transmission Oil Pan Gasket (Part No.TOS 18608)
from
$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
National – Multi Purpose Seal (Part No.9316)
from
$17.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8792S)
from
$6.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.5092)
from
$44.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Tapered Roller Bearing (Part No.S-2720)
Dorman – Help – Clutch Pilot Bushing (Part No.14650)
from
$8.29
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Clutch Pilot Bushing (Part No.690-014.1)
from
$7.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi Purpose Seal (Part No.6712NA)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
B & M – Holeshot 2400 (Part No.70411)
from
$598.99
A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Cable Bracket (Part No.70469)
from
$48.09
Cable Bracket – Powerglide (Bandit style shifters only) APPLICATION: For Powerglide with Pro Bandit (Composite X and Magnum Grip) and rear entry cable.
Product Features:
See More
Product Features:
- Fully Polished/Bright Anodized
- Narrow Design-w/No Knobs
- Lightweight Mechanism
- Reverse Exit Cable Design
- Neutral Safety Switch Built-In
- CNC Machined-6061-T6 Aluminum
- Mounts Through Bottom Of Shifter
- Flush Countersink Hardware Wont Rub Body Panels
B & M – Cable Bracket (Part No.70460)
from
$26.59
B&M cable bracket fits GM Powerglide transmissions.
Product Features:
See More
Product Features:
- Shifter Service Parts
- Steel
- Natural Finish
- Sold individually
- B&M quality
National – Bearings (Part No.A-3)
from
$14.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.9613S)
from
$7.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.471341N)
from
$13.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.470898)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Oil Seal Kit (Part No.S-5200)
from
$6.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1965 GMC PB2500 Series Transmission Parts Categories
1965 GMC PB2500 Series Transmission Parts
You count on your 1965 GMC PB2500 Series to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 44 Transmission Parts ranging in price from $4.79 to $1,150.00, you’re sure to find everything you need for your 1965 GMC PB2500 Series.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 7 different brands like Imperial, National, and Driveworks. 1965 GMC PB2500 Series Transmission Parts start as low as $4.79!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 648 extensive product reviews on 1965 GMC PB2500 Series Transmission Parts. Some of the top-rated Transmission Parts products we carry are Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars and Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1965 GMC PB2500 Series below to get started!
Top-Rated Transmission Parts Brands For Your 1965 GMC PB2500 Series
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 GMC PB2500 Series running right for years to come. In our inventory you’ll find brands like Imperial, National, Driveworks, and even more.
Popular National Transmission Parts
You’ll find popular National brand products across Transmission Seals. All are waiting to get your 1965 GMC PB2500 Series back on the road. Some of the top-rated National products in these categories are:
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1965 GMC PB2500 Series, and some of our most reviewed Imperial parts include:
FAQs for 1965 GMC PB2500 Series Transmission Parts
What are the most purchased Transmission Parts for the 1965 GMC PB2500 Series?
Out of 44 Transmission Parts for the 1965 GMC PB2500 Series, the most popular in our inventory are:
What are the top-rated 1965 GMC PB2500 Series Transmission Parts?
Top-rated Transmission Parts for your 1965 GMC PB2500 Series based on customer reviews/ratings are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
from
$52.99
(4)
Econo-Kool® Transmission Oil Cooler
“I just like the additional cooling on all my vehicles for transmission to last longer. They aren’t getting any cheaper to overhaul!”
