1965 Ford Galaxie Drivetrains
More 1965 Ford Galaxie Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1965 Ford Galaxie, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1965 Ford Galaxie Drivetrains
Driveworks – Oil Seal (Part No.S-3638)
USA Standard Gear – Standard Spider Gear Set For Ford 9", 31 Spline, 4-Pinion Design (Part No.39018)
from
$249.99
Product Features:
See More
- Spider gear kit
- Fits Ford 9″ 31 spline open differential
- Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)
from
$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.
Product Features:
See More
Product Features:
- Side adjuster lock bolt
Yukon Gear – Pinion Install Kit For Ford 9" Differential, 28 Spline, Oversize (Part No.13052)
from
$434.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ with oversize Daytona pinion support
- 28 spline
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Silver Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32037)
from
$269.99
Plain Silver aluminum pinion Supprt for 9″ Ford Daytona, HD 6061.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 28 spline pinion
- Larger inner pinion bearing reduces gear deflection under high load
- Races installed
- 6061 aluminum
Yukon Gear – Grizzly Locker For Ford 9" Differential With 35 Spline Axles, Racing Design (Part No.28027)
from
$1178.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 35 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
- Aggressive design for racing applications only
National – Bearings (Part No.M86649)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 4-Pinion Design (Part No.16034)
from
$317.99
Yukon standard open spider gear kit for 9″ Ford with 31 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 9″ open differential with 31 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)
from
$8.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Gear Install Kit (Part No.F9IKN)
from
$46.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Driveworks – Axle Repair Bearing (Part No.S-RP-5707)
from
$16.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.208-LO)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Yukon Gear – Ford 8" & 9" Tracloc Ring Gear Bolt (Part No.33044)
from
$4.99
Ford 8″ & 9″ TracLoc ring gear bolt, 1-1/4″ long.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with Trac Loc limited slip
- 1.25″ long
Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)
Dorman – Help – U-Joint Bolt Kit (Part No.81004)
from
$6.29
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
3 Qt. Penzoil 80W90 conventional gear Oil.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Felpro – Differential Carrier Gasket (Part No.RDS 13270)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Powertrax – Grip PRO Traction System (Part No.GT109031)
from
$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Product Features:
See More
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Yukon Gear – 9" Ford Gasket (Part No.23012)
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)
from
$36.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)
from
$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.
Product Features:
See More
Product Features:
- Adapter washer
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Yukon Gear – Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes (Part No.33467)
from
$67.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large bearing applications
- 1/2″ bolt holes
- 3 1/2″ x 2 3/8″ bolt pattern
Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)
from
$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fill plug
- Fits Ford 9″
Popular 1965 Ford Galaxie Drivetrains Categories
1965 Ford Galaxie Drivetrains
You count on your 1965 Ford Galaxie to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 363 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1965 Ford Galaxie.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Driveworks, National, and Dorman. 1965 Ford Galaxie Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 655 extensive product reviews on 1965 Ford Galaxie Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Premium Universal Joint with 3.9 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1965 Ford Galaxie below to get started!
Top-Rated Drivetrains Brands For Your 1965 Ford Galaxie
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1965 Ford Galaxie running right for years to come. In our inventory you’ll find brands like Driveworks, National, Dorman, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1965 Ford Galaxie back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated Driveworks Drivetrains
If Driveworks are what you’re looking for, our inventory holds plenty. We stock Driveworks brand Drivetrains for your 1965 Ford Galaxie, and some of our most reviewed Driveworks parts include:
FAQs for 1965 Ford Galaxie Drivetrains
What are the most purchased Drivetrains for the 1965 Ford Galaxie?
Out of 363 Drivetrains for the 1965 Ford Galaxie, the most popular in our inventory are:
What are the top-rated 1965 Ford Galaxie Drivetrains?
Top-rated Drivetrains for your 1965 Ford Galaxie based on customer reviews/ratings are:
from
$25.99
(8)
Greaseable Premium Universal Joint
“For front driveshaft on my 4wd 96 f250. Excellent fit just remember to install so that grease fitting is accessible. I installed mine twice. Would buy”
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
from
$6.29
(4)
U-Joint Bolt Kit
“It fit my Jeep like the originals. Once I get to try it off road will tell if there good parts or not.”
