1965 Dodge Polara Differentials

Essential 1965 Dodge Polara Differentials

USA Standard Gear – Power Lok Positraction for Chrysler 8.75" (Part No.59027)

Power Lok Positraction for Chrysler 8.75"

from

$1015.00
USA Standard Gear Power Lok posi for Chrysler 8.75″, smooth design

Product Features:
  • Gear Power Lok Posi LSD
  • Fits Chrysler 8.75″
  • Smooth design
  • Positraction
See More

Motive Gear – Differential Gear Install Kit (Part No.C8.75IKL)

Differential Gear Install Kit

from

$51.99


Product Features:
  • MINI INSTALL KIT CHRYSLER 8.75 8 3/4″ LATE
See More

Driveworks – Differential Pinion Seal (Part No.S-5126)

Differential Pinion Seal

from

$9.49
Product Features:
  • Brand may vary by location
See More

Yukon Gear – Chrysler 8.75" (Coarse Spline) Pinion Nut Washer (Part No.33162)

Chrysler 8.75" (Coarse Spline) Pinion Nut Washer

from

$9.99
Chrysler 8.75″ (coarse spline) pinion nut washer.

Product Features:
  • Pinion nut washer
  • Fits Chrysler 8.75″ with 10 spline pinion
See More

Yukon Gear – Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD (Part No.30228)

Redi-Sleeve Yoke Saver For 8.75" C, 9.25" C, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD

from

$37.99
Replacement redi-sleeve yoke saver for 8.75″ c, 9.25″ c, Dana 60, Dana 61, Dana 70, Dana 70U, Dana 70HD .Yukon Mighty seal.

Product Features:
  • Redi-Sleeve yoke saver
  • Fits Chrysler 8.75″ and 9.25″ rear, Dana Spicer 60, 70, 70U and 70HD
See More

Motive Gear – Differential Crush Sleeve (Part No.3507575)

Differential Crush Sleeve

from

$2.49


Product Features:
  • CRUSH SLEEVE 7.25 & 8.25 MIN ORDER 5000
See More

Yukon Gear – Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25" (Part No.33233)

Bolt/Screw For Adjuster Lock For Chrysler 7.25", 8.25", 8.75", 9.25"

from

$15.99
Bolt/screw for adjuster lock for Chrysler 7.25″, 8.25″, 8.75″, 9.25″.

Product Features:
  • Side adjuster lock bolt
  • Fits Chrysler 7.25″, 8.25″, 8.75″ and 9.25″
See More

Yukon Gear – Minor Install Kit For Chrysler 41 8.75" Differential (Part No.12005)

Minor Install Kit For Chrysler 41 8.75" Differential

from

$142.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Chrysler 8.75″ ’41’ case
  • Included are a pinion seal, pinion nut, completete shim kit, marking compound and brush.
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Redline Synthetic "Shock Proof" Oil - 3 Quarts

from

$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:
  • Includes three quarts of Redline Shockproof oil
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 4.56 Ratio (Part No.24242)

High Performance Ring & Pinion Gear Set For Chrysler 8.75" With 89 Housing In A 4.56 Ratio

from

$519.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty. This is a fine spline pinion which takes a 29 spline yoke.

Product Features:
  • Fits Chrysler 8.75″ “89” case housing
  • 8.75″ ring gear diameter
  • 29 spline pinion
  • 12 ring gear bolts
  • 4.56 ratio
See More

Motive Gear – Differential Bearing Kit – Koyo (Part No.R8.75RL)

Differential Bearing Kit - Koyo

from

$109.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:
  • KT 8 3/4 CHRY 1.875 PINIO 489 CSTNG SURE GRIP & POWER LOCK ONLY
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

Yukon Gear – Rubber Fill Plug For Chrysler (Part No.33463)

Rubber Fill Plug For Chrysler

from

$22.99
Product Features:
  • Rubber fill plug
  • Fits Chrysler 7.25″, 8.25″ and 9.25″
See More

Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)

Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front

from

$8.99
Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.

Product Features:
  • Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
  • 3/8″ x 24 thread
  • .866″ long
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Yukon Gear – 1541H Alloy Rear Axle For Chrysler 8.75" (Part No.21408)

1541H Alloy Rear Axle For Chrysler 8.75"

from

$284.99
Yukon 1541H alloy cut to fit rear axle for Chrysler 8.75″ measuring 28″-32″ with 30 splines and 5×4.5 bolt pattern. for use with A, C & E-Body. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. Must use Green bearing.

Product Features:
  • Fits Chrysler 8.75″
  • 30 spline
  • Cut to length design fits 28″-32″ applcations
  • 5 x 4.5″ bolt pattern
See More

Yukon Gear – Standard Open Notched Cross Pin Shaft For 9.25" Chrysler (Part No.33309)

Standard Open Notched Cross Pin Shaft For 9.25" Chrysler

from

$84.99
Standard Open notched cross pin shaft for 9.25″ Chrysler.

Product Features:
  • Cross pin shaft
  • Fits Chrysler 9.25″
  • Standard open carrier only
  • Notched
See More

Yukon Gear – Yoke For Chrysler 9.25" With A 7290 U/Joint Size (Part No.41002)

Yoke For Chrysler 9.25" With A 7290 U/Joint Size

from

$279.99
Yukon yoke for Chrysler 9.25″ with a 7290 U/joint size. 2.625″ snap ring span. 1.125″ cap diameter. Inside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler 9.25″ rear
  • 29 spline
  • 7290 u-joint size
  • 2.625″ snap ring span
  • 1.125″ cap diameter
  • Inside snap ring design
  • Strap style
See More

Yukon Gear – Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25" (Part No.33253)

Chrysler Fine Spline Pinion Nut For Chrysler 7.25", 8", 8.25", 8.75", And 9.25"

from

$26.99
Product Features:
  • Pinion nut
  • Fits Chrysler 7.25″, 8.0″, 8.25″, 9.25″ and 8.75″ with 29 spline pinion
See More

Yukon Gear – 9.25" Pinion Gear Thrust Washer (Part No.33274)

9.25" Pinion Gear Thrust Washer

from

$12.99
9.25″ pinion gear thrust washer.

Product Features:
  • Pinion gear thrust washer for Chrysler 9.25″ rear
See More

Felpro – Differential Carrier Gasket (Part No.RDS 6583)

Differential Carrier Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Pinion Install Kit For Chrysler 8.75" (#41) Differential (Part No.13005)

Pinion Install Kit For Chrysler 8.75" (#41) Differential

from

$292.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Chrysler 8.75″ ’41’ case
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 8.25" Chrysler Cover Gasket (Part No.23000)

8.25" Chrysler Cover Gasket

from

$12.99
8.25″ Chrysler cover gasket.

Product Features:
  • Cover gasket
  • Fits Chrysler 8.25″
See More

Yukon Gear – Chrome Cover For Chrysler 9.25" (Part No.32001)

Chrome Cover For Chrysler 9.25"

from

$73.99
Toyota wheel seal for ’80-’97 Full float Landcruiser outer rear, ’86-’95 dually pick-up.Yukon Mighty seal.

Product Features:
  • Fits Chrysler 9.25″ rear
  • Chrome
See More

Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)

Standard Open Spider Gear Kit For '96 And Older 8.25" Chrysler With 27 Spline Axles

from

$301.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fit Chrysler 8.25″ open differntial with 27 spline axles
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1106)

Differential Carrier Shim Kit

from

$18.99


Product Features:
  • CARRIER SHIM-DANA 60 & 70
See More

USA Standard Gear – Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17037)

Spartan Locker For Chrysler 8.25" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$829.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Chrysler 8.25″ with 27 spline axles
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

1965 Dodge Polara Differentials

Maybe you’re in the middle of a full rebuild of that 1965 Dodge Polara. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 179 different Differentials in our inventory ranging from $2.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 1965 Dodge Polara running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1965 Dodge Polara. Driveworks, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1965 Dodge Polara, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 204 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Bearings with 1.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1965 Dodge Polara rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1965 Dodge Polara Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1965 Dodge Polara demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Polara the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets and Rear Housing Cover Gaskets categories, plus more. For a 1965 Dodge Polara, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $6.49
(1)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets
DIFFERENTIAL GASKET
from $6.79
(21)
DIFFERENTIAL GASKET
Rear Housing Cover Gaskets

FAQs for 1965 Dodge Polara Differentials

What are the most purchased Differentials for the 1965 Dodge Polara?

Out of 179 Differentials for the 1965 Dodge Polara, the most popular in our inventory are:
Tapered Cone/Cup Wheel Bearing Set
from $13.99
(14)
Tapered Cone/Cup Wheel Bearing Set
Front Differential Pinion Bearings
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 1965 Dodge Polara Differentials?

Top-rated Differentials for your 1965 Dodge Polara based on customer reviews/ratings are:
Bearings
from $38.49
(2)
Bearings
“nice finish and function. Should perform well.”
Bearings
from $20.99
(2)
Bearings
“this is not a front wheel bearing”
Differential Pinion Shim Kit
from $7.49
(1)
Differential Pinion Shim Kit
“good product”