1965 Chrysler Newport Transmission Parts
Find Your Specific 1965 Chrysler Newport Transmission Parts
Below you will find various in-demand Chrysler Transmission Parts, components and accessories for your 1965 Newport. Advance Auto Parts has popular Newport parts like Transmission Mounts, Transmission Seals, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Newport model years including
1973,
1974,
1975,
1976,
1977,
1978,
1979,
1980,
1981 and more. Select a category of 1965 Chrysler Newport Transmission Parts below and start saving instantly.
Popular 1965 Chrysler Newport Transmission Parts Categories
Essential Transmission Parts for 1965 Chrysler Newports
B & M – Transmission Cast Deep Pan, Brushed Finish TF727/ 518&618/48RE Cummins (Part No.10280)
from
$309.99
Our Hi-Tek deep transmission pans are constructed from A356-T6 aluminum and are cast with thick internal and external fins, adding additional strength and increased cooling properties. The deep pan design increases fluid capacity by 4 quarts over the stock O.E. steel pan. All these features combined help dissipate heat quicker netting lower transmission and fluid temperatures prolonging the life of your transmission, transmission fluid and corresponding components. Other features for this popular pan include a filter, filter extension, gasket and drain port with magnetic drain plug for clean and easy servicing. Also includes a 1/8 inch NPT temperature sensor port for easily adding a temp gauge for monitoring transmission temperatures while daily driving, towing or racing. Includes detailed instructions with all necessary hardware for an easy at home installation. Note: Does not increase fluid capacity for the 48RE transmission.
Product Features:
See More
Product Features:
- Additional Oil Capacity
- More Cooling Ability
- No Dipstick Modification
- Some Include Fluid Pickup Extension
- Built-In Drain Plugs
- Cast Aluminum
ATP – AT TORQUE CONVT SEAL (Part No.TO-4)
from
$12.99
AT TORQUE CONVT SEAL
Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-18)
from
$152.99
One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Include steels, frictions, gaskets, and filter
- Includes Band and Modulator (if applicable)
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$279.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
National – Bearings (Part No.204)
from
$18.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – AT SOLENOID SEAL (Part No.JO-15)
from
$3.99
AT SOLENOID SEAL
FAG US – CONE (Part No.KM88048)
from
$19.49
CONE
ATP – AT OIL PAN GASKET (Part No.TG-8)
from
$11.79
AT OIL PAN GASKET
ATP – AT SEAL (Part No.TO-34)
from
$5.99
AT SEAL
National – Multi Purpose Seal (Part No.7399S)
from
$7.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8160S)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Tapered Roller Bearing (Part No.S-25520)
National – Bearings (Part No.25821)
from
$11.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.PB-286-HD)
from
$7.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Oil Seal (Part No.S-8516N)
from
$8.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.7216)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
FAG US – TAPERED ROLLER BEARI (Part No.KT16)
from
$15.29
TAPERED ROLLER BEARI
National – Bearings (Part No.1307)
from
$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2272)
from
$8.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 59-68; DODGE 61-78; PLYM 60-72;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1959-1978
- Weight approx: 2 Lbs
- COMPLETE MOUNT
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2525)
from
$6.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 65-89; DODGE 63-90; PLYM 67-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1963-1990
- Weight approx: 1 Lbs
- INSERT ONLY
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2512)
from
$15.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 69-89; DODGE 65-90; PLYM 68-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1965-1990
- Weight approx: 2 Lbs
- COMPLETE MOUNT
Energy Suspension – Transmission Mount (Part No.5.1112R)
from
$74.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Felpro – Manual Transmission Gasket Set (Part No.TS 13381-5)
from
$50.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Includes all parts needed to complete the repair
Upgrade your 1965 Chrysler Newport with Top-Quality Transmission Parts
When it comes to maintaining or upgrading your 1965 Chrysler Newport, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Transmission Parts are key to keeping your Newport functioning at its best. At Advance Auto Parts, we offer a wide selection of 47 Transmission Parts for the 1965 Chrysler Newport, designed to meet your needs without breaking the bank.
From
Transmission Mount
replacements to
Transmission Seals
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1965 Chrysler Newport at great prices.
Our Transmission Parts inventory for this model
ranges from just $3.99 to $529.99, with
an average price of $65.05.
Our 47 Transmission Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1965 Chrysler Newport without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1965 Chrysler Newport, we stock popular OEM and aftermarket Transmission Parts from top names
like Imperial, Driveworks, National, and more.
Imperial Transmission Parts
start at just $52.99 and boast an impressive 4 stars average rating from customers.
Driveworks and National also bring quality to the table, with Transmission Parts available starting at $3.99, and at an average 4 stars rating.
With 574 customer reviews and counting, our 1965 Chrysler Newport Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1965 Chrysler Newport is always ready to roll. We’re committed to providing you with everything you need to keep your Newport in top shape, all in one place.
Start shopping confidently below for your 1965 Chrysler Newport!
Best-Selling Transmission Mounts for 1965 Chrysler Newports
Enhance the driving experience in your Chrysler with 4 quality Transmission Mount components, starting at $6.99.
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2272)
from
$8.29
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 59-68; DODGE 61-78; PLYM 60-72;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1959-1978
- Weight approx: 2 Lbs
- COMPLETE MOUNT
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2525)
from
$6.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 65-89; DODGE 63-90; PLYM 67-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1963-1990
- Weight approx: 1 Lbs
- INSERT ONLY
Energy Suspension – Performance Transmission Mount (Part No.5.1101G)
from
$24.99
A true performance application component for cars, trucks, hot rod, for racing and competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Firm Enough for Huge Amounts of Horsepower/Torque
- Soft Enough Not to Transmit Vibration
Energy Suspension – Transmission Mount (Part No.5.1112R)
from
$74.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
Most Popular 1965 Chrysler Newport Transmission Seals
Customize your Chrysler with 13 Transmission Seals products
like Transmission Seals and O-rings,
Pinion Seals, and
Manual Transmission Output Shaft Seals, all
priced under $41.99.
Driveworks – Oil Seal (Part No.S-7300S)
from
$10.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Seal (Part No.7300S)
from
$16.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.7216)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8609)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.5206)
from
$19.29
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today¿s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40░F to 225░F / -40░C to 107░C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.331227H)
from
$25.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
ATP – AT TORQUE CONVT SEAL (Part No.TO-4)
from
$12.99
AT TORQUE CONVT SEAL
ATP – AT SEAL (Part No.TO-34)
from
$5.99
AT SEAL
National – Multi Purpose Seal (Part No.8160S)
from
$8.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.9376)
from
$6.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
USA Standard Gear – ManTransOtptShftSeal (Part No.73644)
from
$14.99
ManTransOtptShftSeal
National – Multi Purpose Seal (Part No.7188S)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.474278)
from
$6.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Top Picks for 1965 Chrysler Newport Transmission Cooler and Parts
Upgrade Chrysler Newports with top-quality Transmission Cooler and Parts parts, including 9 OEM and aftermarket selections for your 1965 model.
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)
from
$73.99
The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.
Product Features:
See More
Product Features:
- Imperial Maxi-Cool® plate and fin transmission cooler
- Size: 3/4″ x 11″ x 7-1/2″
- Mid-size and full-size cars, pickups
- GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243012)
from
$81.99
Product Features:
See More
- Class “A” motor homes, large travel trailers, 5th-wheel trailers
- GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.241018)
from
$65.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- Class “A” motor homes, large travel trailers, 5th-wheel trailers
- GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty (Part No.243008)
from
$80.99
Product Features:
See More
- Imperial Rapid-Cool« plate and fin transmission cooler
- Size: 3/4″ x 11″ x 9-1/2″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
- 33% more efficient than a comparable tube and fin design
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)
from
$52.99
Product Features:
See More
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240514)
from
$81.99
High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.
Product Features:
See More
Product Features:
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242016)
from
$65.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 7-1/2″ x 15-7/8″
- Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
- GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
In-Demand Automatic Transmission Pan and Gaskets for 1965 Chrysler Newports
Select from 7 premium Automatic Transmission Pan and Gaskets parts for your 1965 Chrysler Newport, with prices ranging from $8.99 to $75.99.
Felpro – Transmission Oil Pan Gasket (Part No.TOS 18583)
from
$8.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
ATP – AT OIL PAN GASKET (Part No.TG-8)
from
$11.79
AT OIL PAN GASKET
Mr. Gasket – Auto Trans Oil Pan (Part No.9745CMRG)
from
$75.99
These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.
Product Features:
See More
Product Features:
- Chrome / Steel
- Stock capacity
- Includes drain plug, gasket and hardware
Mr. Gasket – Automatic Transmission Oil Pan Gasket (Part No.8697)
from
$22.99
Chrysler 727 Transmission Pan Gasket – Made from cork/neoprene gasket material which features excellent compressibility and high recovery to create a positive seal.
Product Features:
See More
Product Features:
- High density cork-nitrile rubber blend
- Excellent compressibility and high recovery to create a positive seal
- Excellent Compressibility
Mr. Gasket – Auto Trans Oil Pan (Part No.9745BMRG)
from
$70.99
These pans are offered in stock depth or deep with extra capacity and available in both steel and aluminum to fit your specific needs. Each kit Includes the drain plug, gasket and hardware.
Product Features:
See More
Product Features:
- EDP Black Steel
- Stock capacity
- Includes drain plug, gasket and hardware
Mr. Gasket – Gaskets (Part No.61090MRG)
from
$49.49
These transmission oil pan gaskets are made with a glass-filled nylon carrier with molded rubber on both the top and bottom of the gasket. Each bolt hole has a torque limiter that helps to avoid over-torqueing the bolts for a reliable seal. These gasket are reusable and can be cleaned using soap and water. Ideal for applications that require frequent service. Made in the USA.
Product Features:
See More
Product Features:
- Molded rubber over glass filled nylon carrier
- Reusable ¿ easy cleaning w/ soap & water
- Reusable ┐ easy cleaning w/ soap & water
- Torque Limiters ¿ helps to avoid over torqueing gaskets
- Torque Limiters ┐ helps to avoid over torqueing gaskets
- Applications for many common transmissions
- Ideal for applications that require frequent service
- Made in the USA
Victor Reinz – Transmission Oil Pan Gasket (Part No.71-14935-00)
from
$9.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Most Sold 1965 Chrysler Newport Automatic Transmission Parts
Explore our best-selling Chrysler parts for the 1965 Newport among 2 OEM and aftermarket options starting from $3.99.
ATP – AT SOLENOID SEAL (Part No.JO-15)
from
$3.99
AT SOLENOID SEAL
National – Bearings (Part No.PB-286-HD)
from
$7.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
Top-Rated Transmission Parts Brands For Your 1965 Chrysler Newport
Shop for the best-rated brands offering Transmission Parts and other products for your 1965 Chrysler Newports. Below you’ll find some of our best rated Transmission Parts from Imperial, Driveworks, and National, and more. Transmission Parts from these brands that fit a 1965 Newport start at just $3.99 and are rated as high as 4 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Imperial 1965 Chrysler Newport Transmission Parts
When it comes to maintaining or upgrading your 1965 Chrysler Newport, using quality Transmission Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Transmission Parts, specifically designed for the 1965 Chrysler Newport. With over 9 Imperial brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $52.99, with an average price of just $73.10. Plus, with over 113 customer reviews and an average rating of 4 stars, you can trust that our Imperial Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Driveworks 1965 Chrysler Newport Transmission Parts
Driveworks auto parts is one of the highest quality Transmission Part brands in the market. Any 1965 Chrysler Newport owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1965 Newport, Advance Auto Parts carries a full inventory of 3 Driveworks Transmission Parts. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Driveworks Transmission Parts range from $3.99 to $10.29, plus, with more than 46 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.
FAQs for 1965 Chrysler Newport Transmission Parts
Which Transmission Parts are best-sellers for 1965 Chrysler Newports?
Out of 47 Transmission Parts that fit 1965 Chrysler Newports, the following parts are the top sellers:
- Taper Bearing Set (5050537) – $10.29
- Bearings (3275809) – $15.99
- Transmission Oil Pan Gasket (5785235) – $8.99
What’s the price range for 1965 Chrysler Newport Transmission Parts?
Transmission Part prices for the 1965 Chrysler Newport start at $3.99 and go up to $529.99 for the most premium parts.
What’s the average price of a Transmission Part for a 1965 Chrysler Newport?
The average price for Transmission Parts for the 1965 Chrysler Newport is $65.05. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Transmission Parts for other Chrysler Newport model years?
What are the cheapest Transmission Parts for my 1965 Chrysler Newport?
The cheapest 1965 Chrysler Newport Transmission Parts we carry in stock are:
- AT SOLENOID SEAL (11239035) – $3.99
- Tapered Roller Bearing (10659703) – $3.99
- AT SEAL (11236293) – $5.99
- Multi Purpose Seal (18444402) – $6.29
- Multi Purpose Seal (3271609) – $6.49
What are the top-rated Transmission Parts that fit the 1965 Chrysler Newport?
Out of 574 reviews by customers, our 1965 Chrysler Newport Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1965 Chrysler Newport and their top-rated products:
- Manual Transmission Gaskets
- Manual Transmission Gasket Set (19782172) – $50.99
- Automatic Transmission Pan and Gaskets
- Manual Transmission Gasket Set (19782172) – $50.99
- Transmission Bearings
- Manual Transmission Gasket Set (19782172) – $50.99
What types of Transmission Parts do you sell for my 1965 Chrysler Newport?
As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 1965 Chrysler Newport:
Can I get help with 1965 Chrysler Newport Transmission Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Transmission Parts and more.
What is your return policy for Chrysler Newport Transmission Parts?
Advance Auto Parts keeps returns simple. For new Chrysler Newport Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
