1964 TVR Griffith Engine Parts

Essential Engine Parts for 1964 TVR Griffiths

Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)

Rollin' Thunder Camshaft for Small-Block Ford 289-302 V8

from

$492.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.

Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
  • Use Only Stock Ratio Rocker Arms
See More

Felpro – Multi-Purpose O-Ring (Part No.5511)

Multi-Purpose O-Ring

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ARP Auto Racing – For Use With Ford 289/ 302 With Aluminum Timing Cover And Water Pump, Hex Head (Part No.154-1504)

For Use With Ford 289/ 302 With Aluminum Timing Cover And Water Pump, Hex Head

from

$33.99
ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant. It is the fastener of choice.

Product Features:
  • Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
  • Nominally Rated At 180,000 Pounds Per Square Inch Tensile Strength To Provide You With Plenty Of Clamping Force
  • Made In USA
  • Will Not Fit 5.0L Roller Cam Applications
  • Sold As A Kit
See More

ARP Auto Racing – For Use With 289/ 302 Cubic Inch/ Boss 302 Ford, Apr2000 Steel, 220000 Psi (Part No.154-7904)

For Use With 289/ 302 Cubic Inch/ Boss 302 Ford, Apr2000 Steel, 220000 Psi

from

$25.99
Many an engine has been destroyed as a result of oil pump driveshaft failure. To cure this all too common problem, ARP has designed an extra heavy duty shaft that will provide you with the necessary reliability. The shaft is made from heat treated, premium grade aerospace chrome moly steel. Moreover, the shaft diameter is a larger diameter than the OEM unit. These features combine to enable ARP shafts to handle the added torque requirements of increased capacity oil pumps or heavy viscosity lubricants.

Product Features:
  • Extra Heavy Duty Shaft That Will Provide The Necessary Reliability
  • Enable Shafts To Handle The Added Torque Requirements Of Increased Capacity Oil Pumps Or Heavy Viscosity Lubricants
  • Made From Arp2000 And Heat Treated To 220,000 Psi
  • CNC Milled (Not Broached) Hex, And Has The Retaining Washer Installed
See More

Felpro – Engine Oil Pump Gasket (Part No.70083)

Engine Oil Pump Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Edelbrock – Sure Seat Valve Springs (Part No.5845)

Sure Seat Valve Springs

from

$151.99
The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:
  • Non-Rotator Type
  • 1.460 in. Outer Diameter
  • 1.060 in. Inner Diameter
  • 1.060 in. Coil Blind
  • Set of 16
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13264 R)

Engine Valve Cover Gasket Set

from

$23.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

ARP Auto Racing – For Use With 289/ 460 Cubic" Ford, 5/8" Socket Size, 5/8" – 18 Thread Size (Part No.150-2501)

For Use With 289/ 460 Cubic" Ford, 5/8" Socket Size, 5/8" - 18 Thread Size

from

$30.99
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:
  • Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
  • Professional Quality Fasteners
  • Delivers ARP Quality And Reliability
  • Made In USA
  • 2.05″ Underhead Length
  • Ford 289-460 (except 351C)
  • Sold Individually
  • 200,000 PSI
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8548 PT-2)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Engine Oil Pump Pickup Tube Gasket (Part No.72516)

Engine Oil Pump Pickup Tube Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

ARP Auto Racing – For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile (Part No.154-3601)

For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile

from

$64.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 Psi Tensile Strength
  • High Performance Head Bolts Are Stronger
See More

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45008)

Engine Timing Cover Gasket Set

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 30136)

Engine Crankshaft Seal Kit

from

$17.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Conversion Gasket Set (Part No.CS 8548-4)

Engine Conversion Gasket Set

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

ARP Auto Racing – For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16 (Part No.134-7104)

For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16

from

$78.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 Psi
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • 1″ Adjuster Thread Length
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application with Roller Rockers
See More

ARP Auto Racing – 1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In (Part No.134-7124)

1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In

from

$10.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 Psi
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Sold As A Pair
  • 1″ Adjuster Thread Length
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application with Roller Rockers
See More

Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft (Part No.5028)

Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft

from

$1606.99
The Edelbrock #5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 60cc Combustion Chamber Volume
  • 205cc Intake/62cc Exhaust Runner Volume
  • 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Edelbrock – E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft (Part No.79259)

E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft

from

$1363.99
The Edelbrock part #79259 Small Block Ford E-CNC 185 cylinder head is the ultimate in performance. This cylinder head is fully CNC ported for maximum horsepower and torque, making them ideal for high-performance’s street and light duty racing applications

Product Features:
  • Complete Single For Hydraulic Roller/Mechanical Flat Tappet
  • 59cc Combustion Chamber Volume
  • 185cc Intake/75cc Exhaust Runner Volume
  • 2.02 in. Intake/1.57 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 8548 PT-11)

Cylinder Head Gasket Set

from

$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Oil Pan Gasket Set: PermaDryPlus Rigid Carrier, Includes Snap-Ups®, 5 Piece Set (Part No.OS 13260 T)

Oil Pan Gasket Set: PermaDryPlus Rigid Carrier, Includes Snap-Ups®, 5 Piece Set

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – OIL PAN GASKET SET (Part No.OS 13260 C)

OIL PAN GASKET SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 13364-1)

Engine Valve Stem Oil Seal Set

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72562)

Engine Valve Stem Oil Seal Set

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Edelbrock – Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 (Part No.7122)

Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8

from

$428.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

from

$321.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)

Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8

from

$419.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:
  • Designed for 2500 to 6500 Performance
  • Designed for Hi-Perf Street; Drag or Marine Use
  • Matched to Edelbrock Torker II Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Upgrade your 1964 TVR Griffith with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 1964 TVR Griffith, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your TVR or enhancing its overall performance, Engine Parts are key to keeping your Griffith functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Engine Parts for the 1964 TVR Griffith, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 1964 TVR Griffith at great prices. Our Engine Parts inventory for this model ranges from just $2.29 to $1,606.99, with an average price of $163.67. Our 35 Engine Parts in stock come from 4 trusted brands, so you’re sure to find the right part for your 1964 TVR Griffith without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1964 TVR Griffith, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO Edelbrock, and more. FELPRO Engine Parts start at just $2.29 and boast an impressive 5 stars average rating from customers. With 109 customer reviews and counting, our 1964 TVR Griffith Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products and more to make sure your 1964 TVR Griffith is always ready to roll. We’re committed to providing you with everything you need to keep your Griffith in top shape, all in one place. Start shopping confidently below for your 1964 TVR Griffith!

Best-Selling Valve Cover and Cylinder Heads for 1964 TVR Griffiths

Enhance the driving experience in your TVR with 10 quality Valve Cover and Cylinder Head components, starting at $10.99.

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.8548 PT-2)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.9333 PT-1)

Cylinder Head Gasket: Composite, Without Head Bolts

from

$34.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Manufactured for the repair environment
  • Unsurpassed quality you can trust
  • Unsurpassed quality you can trust
See More

Felpro – Cylinder Head Gasket Set (Part No.HS 8548 PT-11)

Cylinder Head Gasket Set

from

$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Nonstick anti-friction coating seals small surface scratches and imperfections
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • NO RETORQUE DESIGN — Steel core helps eliminate the need for retorquing head bolts
  • STRONG AND DURABLE — Features graphite or reinforced fiber facing material and steel armor for strength and durability
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

ARP Auto Racing – For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile (Part No.154-3601)

For Use With Ford Small Block 289/ 302, Hex Head, 180000Psi Tensile

from

$64.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:
  • High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
  • Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
  • Rated At 180,000 Psi Tensile Strength
  • High Performance Head Bolts Are Stronger
See More

ARP Auto Racing – For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16 (Part No.134-7104)

For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16

from

$78.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 Psi
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Set of 16
  • 1″ Adjuster Thread Length
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application with Roller Rockers
See More

Edelbrock – Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft (Part No.5028)

Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft

from

$1606.99
The Edelbrock #5028 E-Series Cylinder heads are designed for Small-Block Ford applications. The Edelbrock E-Series cylinder heads are a step up in affordable performance from our E-Street line. They feature larger runners for increased airflow, revised ex

Product Features:
  • Complete Pair For Hydraulic Flat Tappet
  • 60cc Combustion Chamber Volume
  • 205cc Intake/62cc Exhaust Runner Volume
  • 2.08 in. Intake/1.6 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Edelbrock – E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft (Part No.79259)

E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft

from

$1363.99
The Edelbrock part #79259 Small Block Ford E-CNC 185 cylinder head is the ultimate in performance. This cylinder head is fully CNC ported for maximum horsepower and torque, making them ideal for high-performance’s street and light duty racing applications

Product Features:
  • Complete Single For Hydraulic Roller/Mechanical Flat Tappet
  • 59cc Combustion Chamber Volume
  • 185cc Intake/75cc Exhaust Runner Volume
  • 2.02 in. Intake/1.57 in. Exhaust Valve Diameter
  • 0.625 in. Deck Thickness
See More

Edelbrock – Sure Seat Valve Springs (Part No.5845)

Sure Seat Valve Springs

from

$151.99
The Edelbrock #5845 Replacement Hydraulic Roller Sure Seat Valve Spring for Edelbrock cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:
  • Non-Rotator Type
  • 1.460 in. Outer Diameter
  • 1.060 in. Inner Diameter
  • 1.060 in. Coil Blind
  • Set of 16
See More

Edelbrock – Sure Seat Valve Springs (Part No.5825)

Sure Seat Valve Springs

from

$147.99
The Edelbrock #5825 Replacement Sure Seat Valve Spring for Edelbrock #5085, 60759, 60909, 60719, 60739, 60999, 60899 & 79899 cylinder heads are made of highest quality spring wire and precision wound to close tolerances.

Product Features:
  • Non-Rotator Type
  • 1.460 in. Outer Diameter
  • Made In The USA
  • Single Coil Spring Type
  • Set of 16
See More

ARP Auto Racing – 1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In (Part No.134-7124)

1.895"Oal Stud, 1"D Adjuster Thread, 3/8"-24, 7/16"-14 Thread, 0.71"D Screw-In

from

$10.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.

Product Features:
  • Made Of 8740 Chrome Moly Forgings
  • Heat Treated To 180,000 Psi
  • Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
  • Lengths Are Exact Designed To Provide Positive Seating Every Time
  • Sold As A Pair
  • 1″ Adjuster Thread Length
  • 3/8″-24 Shank Diameter and Thread
  • 3/8″ Typical Small Block Application with Roller Rockers
See More

Most Popular 1964 TVR Griffith Camshafts

Customize your TVR with 4 Camshafts products like Camshafts and Camshaft and Lifter Kits, all priced under $492.99.

Edelbrock – Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8 (Part No.7122)

Performer RPM Camshaft And Lifter Kit #7122 For Small-Block Ford 289-302 V8

from

$428.99


Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

from

$321.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)

Rollin' Thunder Camshaft for Small-Block Ford 289-302 V8

from

$492.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.

Product Features:
  • Designed for 1500 to 6500 Performance
  • Maximum Power in High-RPM with Good Low-End Torque
  • Matched to Edelbrock Performer RPM Intakes
  • 10 to 12 in. of Manifold Vacuum at Idle
  • More Lift and Duration than Most Street Camshafts
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
  • Use Only Stock Ratio Rocker Arms
See More

Edelbrock – Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8 (Part No.5022)

Torker-Plus Camshaft Kit for 1957-95 Small-Block Ford 289-302 V8

from

$419.99
Edelbrock camshafts are matched to Edelbrock Total Power Package components for proven performance, taking the guesswork out of camshaft selection. They are compatible with OEM or Edelbrock hydraulic roller tappets which reduce friction, virtually eliminate break-in problems, and permit higher valve velocities for increased performance. Designed to work with Torker II manifolds for performance from 2500 to 6500 RPM, these camshafts are ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft.

Product Features:
  • Designed for 2500 to 6500 Performance
  • Designed for Hi-Perf Street; Drag or Marine Use
  • Matched to Edelbrock Torker II Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Dyno Matched/Street Proven Performance
  • Take The Guesswork Out Of Camshaft Selection
See More

Top Picks for 1964 TVR Griffith Engine Gaskets and Seals

Upgrade TVR Griffiths with top-quality Engine Gaskets and Seals parts, including 16 OEM and aftermarket selections for your 1964 model.

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Fuel Pump Mounting Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13264 T)

Engine Valve Cover Gasket Set

from

$46.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over a rigid carrier which resists high heat
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Oil Pan Gasket Set: PermaDryPlus Rigid Carrier, Includes Snap-Ups®, 5 Piece Set (Part No.OS 13260 T)

Oil Pan Gasket Set: PermaDryPlus Rigid Carrier, Includes Snap-Ups®, 5 Piece Set

from

$51.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45008)

Engine Timing Cover Gasket Set

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – OIL PAN GASKET SET (Part No.OS 13260 C)

OIL PAN GASKET SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13264 C)

Engine Valve Cover Gasket Set

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Oil Pump Pickup Tube Gasket (Part No.72516)

Engine Oil Pump Pickup Tube Gasket

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Felpro – VALVE COVER GASKET SET (Part No.VS 50029 C)

VALVE COVER GASKET SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Crankshaft Seal Kit (Part No.BS 30136)

Engine Crankshaft Seal Kit

from

$17.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 13264 R)

Engine Valve Cover Gasket Set

from

$23.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72562)

Engine Valve Stem Oil Seal Set

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 45168)

Engine Timing Cover Gasket Set

from

$25.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 13364-1)

Engine Valve Stem Oil Seal Set

from

$10.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Felpro – Engine Conversion Gasket Set (Part No.CS 8548-4)

Engine Conversion Gasket Set

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
  • Includes all the parts necessary to complete the repair unless otherwise noted
  • Includes all the parts necessary to complete the repair unless otherwise noted
See More

Felpro – Engine Oil Pump Gasket (Part No.70083)

Engine Oil Pump Gasket

from

$3.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Fuel Pump Mounting Gasket

from

$2.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

In-Demand Engine Internals for 1964 TVR Griffiths

Select from 2 premium Engine Internals parts for your 1964 TVR Griffith, with prices ranging from $30.99 to $61.99.

ARP Auto Racing – For Use With Ford Small Block 289/ 302 Cid, 2 Bolt Main, Hex Head, Chrome Moly (Part No.154-5001)

For Use With Ford Small Block 289/ 302 Cid, 2 Bolt Main, Hex Head, Chrome Moly

from

$61.99
Far superior to any other main bolt kit offered for use in competition engines, ARP main bolts are designed to meet the exacting standards and demands of professional engine builders. Forged from 8740 chrome moly, all bolts feature generous under-head radius and rolled threads for the utmost reliability. The threads are rolled after heat-treating, which makes them about 2000 Percent longer fatigue life than most main bolts, which are threaded prior to heat-treating.

Product Features:
  • Forged From Premium Grade 8740 Chrome Moly Steel
  • Generous Under Head Radius And Rolled Threads For The Utmost Reliability
  • Reduced Wrenching Head
  • Designed To Meet The Exacting Standards And Demands Of Professional Engine Builders
  • 2-Bolt Main
  • Front or Rear Sump
  • Includes Oil Pickup Standoff Bolt
  • 180,000 PSI
See More

ARP Auto Racing – For Use With 289/ 460 Cubic" Ford, 5/8" Socket Size, 5/8" – 18 Thread Size (Part No.150-2501)

For Use With 289/ 460 Cubic" Ford, 5/8" Socket Size, 5/8" - 18 Thread Size

from

$30.99
As the crankshaft flexes and twists, the balancer absorbs incredible amounts of kinetic energy. To ensure that the balancer is locked in position, ARP has developed these ultra strong 200,000 Pounds Per Square Inch bolts that let you exert maximum clamping force. Special features comes with 1/4 Inch thick, wide area washer and an extra tall 12 point head that accepts a deep socket and eliminates the worry of stripping the head.

Product Features:
  • Ultra Strong Bolt Rated At 200,000 Pounds Per Square Inch
  • Professional Quality Fasteners
  • Delivers ARP Quality And Reliability
  • Made In USA
  • 2.05″ Underhead Length
  • Ford 289-460 (except 351C)
  • Sold Individually
  • 200,000 PSI
See More

Most Sold 1964 TVR Griffith Engine Timing Parts

Explore our best-selling TVR parts for the 1964 Griffith among 1 OEM and aftermarket options starting from $33.99.

ARP Auto Racing – For Use With Ford 289/ 302 With Aluminum Timing Cover And Water Pump, Hex Head (Part No.154-1504)

For Use With Ford 289/ 302 With Aluminum Timing Cover And Water Pump, Hex Head

from

$33.99
ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so That is why ARP came up with these super tough bolts (your choice of chrome moly steel or polished stainless (ARP 300) both rated 170,000 PSI). The stainless has the added advantage of being rust and corrosion resistant. It is the fastener of choice.

Product Features:
  • Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
  • Nominally Rated At 180,000 Pounds Per Square Inch Tensile Strength To Provide You With Plenty Of Clamping Force
  • Made In USA
  • Will Not Fit 5.0L Roller Cam Applications
  • Sold As A Kit
See More

Top-Rated Engine Parts Brands For Your 1964 TVR Griffith

Shop for the best-rated brands offering Engine Parts and other products for your 1964 TVR Griffiths. Below you’ll find some of our best rated Engine Parts from FELPRO and Edelbrock, and more. Engine Parts from these brands that fit a 1964 Griffith start at just $2.29 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 1964 TVR Griffith Engine Parts

When it comes to maintaining or upgrading your 1964 TVR Griffith, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 1964 TVR Griffith. With over 19 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.29, with an average price of just $25.41. Plus, with over 108 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Valve Stem Oil Seal Set
from
$10.29
This product is not rated

Engine Valve Stem Oil Seal Set

“”

Engine Timing Cover Gasket Set
from
$25.49
This product is not rated

Engine Timing Cover Gasket Set

“”

Engine Conversion Gasket Set
from
$31.49
This product is not rated

Engine Conversion Gasket Set

“”

Popular Edelbrock 1964 TVR Griffith Engine Parts

Edelbrock auto parts is one of the highest quality Engine Part brands in the market. Any 1964 TVR Griffith owner should feel confident when installing genuine Edelbrock parts in their vehicle. To ensure the best fit and performance for your 1964 Griffith, Advance Auto Parts carries a full inventory of 8 Edelbrock Engine Parts. Plus you will be keeping your TVR in peak condition while saving money because prices on these Edelbrock Engine Parts range from $147.99 to $1,606.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft
from
$1363.99
This product is not rated

E-CNC Small-Block Ford Cylinder Head Hydraulic Roller Camshaft

“”

Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft
from
$1606.99
This product is not rated

Small-Block Ford E-205 Cylinder Head w/ Flat Tappet Camshaft

“”

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8
from
$321.99
This product is not rated

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

“”

FAQs for 1964 TVR Griffith Engine Parts

Which Engine Parts are best-sellers for 1964 TVR Griffiths?

Out of 35 Engine Parts that fit 1964 TVR Griffiths, the following parts are the top sellers:

What’s the price range for 1964 TVR Griffith Engine Parts?

Engine Part prices for the 1964 TVR Griffith start at $2.29 and go up to $1,606.99 for the most premium parts.

What’s the average price of a Engine Part for a 1964 TVR Griffith?

The average price for Engine Parts for the 1964 TVR Griffith is $163.67. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other TVR Griffith model years?

Yes, we currently carry Engine Parts for 2 model years of TVR Griffiths between 1965 and 1966. Engine Parts are bought most frequently for the following model years: 1966 and 1965.

What are the cheapest Engine Parts for my 1964 TVR Griffith?

The cheapest 1964 TVR Griffith Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 1964 TVR Griffith?

Out of 109 reviews by customers, our 1964 TVR Griffith Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 1964 TVR Griffith and their top-rated products:

Can I get help with 1964 TVR Griffith Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about TVR Engine Parts and more.

What is your return policy for TVR Griffith Engine Parts?

Advance Auto Parts keeps returns simple. For new TVR Griffith Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.