1964 Porsche 356SC Steering and Chassis Parts
More 1964 Porsche 356SC Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1964 Porsche 356SC, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1964 Porsche 356SC Steering and Chassis Parts
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Febi – King Pin Repair Kit (Part No.L207114739FEB)
from
$93.50
The Febi King Pin Repair Kit is OE Quality and is manufactured using only the highest quality materials. Installation Note: On some applications take note, as the upper and lower bushings are different lengths. After installation, the bushings must be honed to fit the pins.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Kit comes with the required bushings and pins
- Meets or exceeds the OE specifications.
Febi – Link Pin Repair Kit (Part No.M304514740FEB)
from
$158.15
Link Pin Repair Kit
Sachs – Stabilus STAB-O-SHOC Steering Damper (Part No.M400031113SAC)
from
$42.57
Due to their flexibility and ruggedness, these dampers have proven themselves as reliable partners outside of vehicle construction wherever vibrations had to be reduced and safely dampened. The diaphragm against the outside of the pressure tube can easily absorb the additional piston rod volume, resulting in slip-free force transmission in any mounting orientation. Due to the special piston system with valve plates, the damping forces can be set variably and virtually independently of each other. The TA20 is the standard version of this damper, which has a proven track record in numerous applications. The TA30 and TA40 variants are special designs, which will be customized for higher loads according to your requests after consultation with our product developers.
Product Features:
See More
Product Features:
- Damping forces up to 3000 N in tension and compression direction
- Damping forces can be set independently of each other in both directions at the factory
- Non-pressurized, no extension force
- Positive, direct instant damping
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301019234LEM)
from
$21.57
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301019235LEM)
from
$21.75
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Meyle – Meyle Tie Rod End (Part No.M301017013MEY)
from
$23.81
Meyle tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Meyle tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1964 Porsche 356SC Steering and Chassis Parts Categories
1964 Porsche 356SC Steering and Chassis Parts
You count on your 1964 Porsche 356SC to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 9 Steering and Chassis Parts ranging in price from $5.79 to $158.15, you’re sure to find everything you need for your 1964 Porsche 356SC.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 6 different brands like Driveworks, National, and Sachs. 1964 Porsche 356SC Steering and Chassis Parts start as low as $5.79!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 85 extensive product reviews on 1964 Porsche 356SC Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1964 Porsche 356SC below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1964 Porsche 356SC
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1964 Porsche 356SC running right for years to come. In our inventory you’ll find brands like Driveworks, National, Sachs, and even more.
Popular Driveworks Steering and Chassis Parts
You’ll find popular Driveworks brand products across Steering Shafts. All are waiting to get your 1964 Porsche 356SC back on the road. Some of the top-rated Driveworks products in these categories are:
FAQs for 1964 Porsche 356SC Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1964 Porsche 356SC?
Out of 9 Steering and Chassis Parts for the 1964 Porsche 356SC, the most popular in our inventory are:
