1964 Oldsmobile Cutlass Performance Exhaust Products
More 1964 Oldsmobile Cutlass Performance Exhaust Products
Find your specific 1964 Oldsmobile Cutlass original or aftermarket Performance Exhaust Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1964 Oldsmobile Cutlass Performance Exhaust Products
Flowmaster Inc. – Prebent Tailpipes – 2.50 in. Rear Exit – Pair (Part No.15817)
from
$212.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowmaster Inc. – Prebent Tailpipes – 3.00 in. Rear Exit – Pair (Part No.15819)
from
$247.99
Prebent pipe kits. Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942043)
from
$133.99
This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Moderate Sound (Part No.942453)
from
$139.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.942448)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four-inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.942451)
from
$153.99
The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.25in Offset Inlet 2.25in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.42443)
from
$99.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)
from
$113.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Mr. Gasket – Alternator Bracket (Part No.4954)
from
$16.99
Dress up your engine. These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, similar in design to OEM units, these brackets can be adapted to other engines.
Product Features:
See More
Product Features:
- Heavy gauge steel
- Polished to high luster
- Chrome plated for lasting beauty
Mr. Gasket – Side Mount Alternator Bracket (Part No.9852)
from
$22.99
Side mount header bracket. Made from heavy gauge chrome plated steel, these brackets are used to mount the alternator on small block Chevy applications.
Product Features:
See More
Product Features:
- Heavy gauge
- Chrome plated steel
Mr. Gasket – Ultra Seal; Exhaust Gasket Set (Part No.5901)
from
$30.99
Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.
Product Features:
See More
Product Features:
- Withstands intense exhaust heat
- Graphite-impregnated facing
- Steel expanded metal core
- Superior tensile strength
- Resists deteriorating
- Anti-stick properties
- Easy removal for disassembly
Mr. Gasket – Ultra Seal; Exhaust Gasket Set (Part No.5900)
from
$30.99
Graphite impregnated facing and a steel expanded metal core. Superior tensile strength. Resists cracking and withstands intense heat. Resists deteriorating. Anti-stick properties and easy removal for disassembly.
Product Features:
See More
Product Features:
- Graphite-impregnated facing
- Steel expanded metal core
- Superior tensile strength
- Resists cracking
- Withstands intense heat
- Resists deteriorating
- Anti-stick properties
- Easy removal for disassembly
Mr. Gasket – Exhaust Manifold Gasket -Performance (Part No.5906)
from
$40.99
Exhaust Manifold Gasket -Performance
Edelbrock – Exhaust Manifold Gasket Set for Chevrolet (Part No.7204)
from
$24.99
Product Features:
See More
- 0.0625 in. Thickness
- 1.50 in. x 1.50 in. Port Size
- For SB Chevy
- Black Color
- Two Piece Configuration
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1448)
from
$34.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Mr. Gasket – Copper Seal; Exhaust Gasket Set (Part No.7150)
from
$57.99
Copperseal exhaust gaskets are unique gaskets made from .043 inch solid copper. They feature an embossed O-ring design for a leak proof seal. They won’t shrink, deteriorate or blowout. Header bolts stay tight. Ideal for motor homes and towing.
Product Features:
See More
Product Features:
- Will Not Shrink/Deteriorate
- Creates A Tight Leak Proof Seal
- Helps Lower Under hood Temps
- Seals Irregular Surfaces
- Seals Slightly Damaged Surface
- Ideal For Tow Vehicles
- Ideal For Motor Homes
Mr. Gasket – Exhaust Gasket Set (Part No.150B)
from
$19.99
Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.
Product Features:
See More
Product Features:
- High-temperature exhaust material
- Withstands extreme exhaust heat
- Provides excellent sealing and durability
- Superior tensile strength
- Resists deteriorating
- Provides excellent torque retention
Mr. Gasket – Exhaust Gasket Set (Part No.150)
from
$25.99
Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.
Product Features:
See More
Product Features:
- High-temperature exhaust material
- Withstands extreme exhaust heat
- Provides excellent sealing and durability
- Superior tensile strength
- Resists deteriorating
- Provides excellent torque retention
Mr. Gasket – Exhaust Gasket Set (Part No.6452)
from
$20.99
Mr. Gasket has three types of exhaust gaskets–standard, Ultra Seal, and Copperseal. Use the standard for a stock rebuild and the Ultra or Copperseal for extra blowout protection.
Product Features:
See More
Product Features:
- Designed to provide excellent sealing and durability
- Large fiber gasket material
- Heat resistant
- Reusable
- Precision die cut for excellent fit
- Limited warranty
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15897)
from
$1083.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15897 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Aggressive exterior and Moderate interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Dual Split Rear Behind Rear Tires exit that you can enhance with tips of your choosing, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15897 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Flowmaster Inc. – Header-back System – 3.00 in. Dual Rear Exit – Pipes Only No Mufflers (Part No.1040)
from
$412.99
Flowmaster’s 16 gauge mandrel bent pipe kits are designed to fit perfectly onto your vehicle with all the quality and performance that you would expect from Flowmaster.
See More
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15893)
from
$1142.99
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15893 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15893 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
MagnaFlow – Street Series Crossmember-Back Performance Exhaust System (Part No.15894)
from
$1000.00
The MagnaFlow Street Series Crossmember-Back Performance Exhaust System 15894 brings enhanced engine sound and dyno-proven performance to your muscle car with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features a crossmember-back layout designed to replace your exhaust system from the crossmember on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Multiple Exit Options exit with 2.75in. Polished Weld-On Single Wall Turndown Cut Edge tips, your muscle car will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15894 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
Popular 1964 Oldsmobile Cutlass Performance Exhaust Products Categories
1964 Oldsmobile Cutlass Performance Exhaust Products
Maybe you’re in the middle of a full rebuild of that 1964 Oldsmobile Cutlass. Maybe you just need a couple of Performance Exhaust Products. Either way, Advance Auto Parts has 7 different Performance Exhaust Products in our inventory ranging from $22.99 to $1,142.99. That means you can find the exact parts or products you need to keep that 1964 Oldsmobile Cutlass running smoothly.
Performance Exhaust Products are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Oldsmobile Cutlass. Mr. Gasket, FEL-PRO Performance, and Flowmaster Inc. are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Exhaust Products for your 1964 Oldsmobile Cutlass, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Exhaust Products to keep your 1964 Oldsmobile Cutlass rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Exhaust Products Brands To Make Your 1964 Oldsmobile Cutlass Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Oldsmobile Cutlass demands trusted brand parts and products to keep it running. Many trusted brands of Performance Exhaust Products make up Advance Auto Parts’ inventory, and all are ready to help make your Cutlass the best it can be. Be sure to browse some of our top Performance Exhaust Products brands and parts.
FAQs for 1964 Oldsmobile Cutlass Performance Exhaust Products
What are the most purchased Performance Exhaust Products for the 1964 Oldsmobile Cutlass?
Out of 7 Performance Exhaust Products for the 1964 Oldsmobile Cutlass, the most popular in our inventory are:
from
$30.49
This product is not rated
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets
from
$22.99
This product is not rated
Side Mount Alternator Bracket
Performance Exhaust Header Hardware
