1964 Ford Custom 500 Valve Cover and Cylinder Heads
More 1964 Ford Custom 500 Valve Cover and Cylinder Heads
Find your specific 1964 Ford Custom 500 original or aftermarket Valve Cover and Cylinder Heads below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1964 Ford Custom 500 Valve Cover and Cylinder Heads
Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)
from
$141.99
Product Features:
See More
- Non-Rotator Type
- 1.550 in. Outer Diameter
- .190 Wire Size
- Single Coil Spring Type
- Set of 16
ARP Auto Racing – For Use With Ford Big Block 390/ 428 Cid Fe Series, Hex Head, Black Oxide, Chrome (Part No.155-3601)
from
$109.99
High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.
Product Features:
See More
Product Features:
- High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
- Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
- Rated At 180,000 Psi Tensile Strength
- High Performance Head Bolts Are Stronger
Mr. Gasket – Ultra Seal: Cylinder Head Bolts (Part No.950G)
from
$32.99
These grade 8 alloy steel, longer length bolts are designed to compensate for thread length lost when using head bolt washers. This allows increased torque and clamping. Set of 10 does one cylinder head.
Product Features:
See More
Product Features:
- Cylinder Head Bolts
- Longer-Than-Stock
- High Quality Grade 8 Alloy
- Increase Torque Settings
- Higher Clamp Loads On Gasket
ARP Auto Racing – For Use With Chevy Small Block, 1.895" Stud L, Black Oxide, Chrome, Set Of 16 (Part No.134-7104)
from
$59.99
If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma-Loc(TM) adjusters.
Product Features:
See More
Product Features:
- Made Of 8740 Chrome Moly Forgings
- Heat Treated To 180,000 Psi
- Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
- Lengths Are Exact Designed To Provide Positive Seating Every Time
- Set of 16
- 1″ Adjuster Thread Length
- 3/8″-24 Shank Diameter and Thread
- 3/8″ Typical Small Block Application with Roller Rockers
Edelbrock – Rocker Shaft Stud Kit (Part No.6009)
Sealed Power – Engine Rocker Arm Kit (Part No.R-836)
from
$12.49
Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Ball
- 1 Nut
- Utilizes ISO & QS certified manufacturing
Sealed Power – Engine Rocker Arm Kit (Part No.R-855)
from
$8.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Complete rocker arm assembly
- 1 Arm
- 1 Pivot
- 1 Arm
- Utilizes ISO & QS certified manufacturing
Mr. Gasket – Mls Head Gasket (Part No.3175G)
from
$110.99
Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids.
Product Features:
See More
Product Features:
- Gasket bore – 4.030 inch: Compressed thickness – .040 inch
- Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
- Optimized sealing embossments seals extreme cylinder pressure
- Provides excellent stability and reduces cylinder bore distortion.
- Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
- Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
- For high-performance street, drag race and oval track use
Mr. Gasket – Ultra Seal: Head Gasket (Part No.5807G)
from
$75.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.
Product Features:
See More
Product Features:
- Five layer (graphite core/perforated steel outer layers) composite construction
- Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
- Provides excellent stability, compressibility and high temperature endurance
- Coated with high temperature silicone to ensure sealing of engine fluids
- Will not brinell (indent) aluminum cylinder heads
- For high performance street, drag race and oval track use
- Compatible w/High Octane Fuel
- Compatible With Exotic Fuel
Dorman – Pipe Plug C.S. Square 3/8-18 Npt, Head Size 5/16 In. (sold by each) (Part No.090-019)
from
$2.99
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Pipe Plug C.S. Hex 3/4-14 Npt X 5/8 In. (sold by each) (Part No.090-072)
from
$3.49
This engine cylinder head plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine cylinder head plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Push Rod (Part No.RP-3165)
from
$2.99
Sealed Power« Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.
See More
Sealed Power – Engine Push Rod (Part No.RP-3167)
from
$2.49
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Edelbrock – Performer Small-Block Ford 1.90" Cylinder Head Hydraulic Flat Tappet (Part No.60329)
from
$1035.99
50 state street legal aluminum cylinder head. Out-of-the-box bolt-on performance. Intake valves are used for stock pistons.
Product Features:
See More
Product Features:
- 50-State Street Legal Aluminum Cylinder Head
- Out-of-the-Box Bolt-On Performance
- Intake Valves Are For Use w/Stock Pistons
Edelbrock – RPM Small-Block Ford 351 Cleveland Cylinder Head Hydraulic Roller Cam (Part No.61625)
from
$1276.99
The Edelbrock #61625 Performer RPM cylinder head is designed for use with 351C, 351M & 400M Ford engine applications. The Edelbrock #61625 Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-p
Product Features:
See More
Product Features:
- Complete Single For Hydraulic Roller
- 60cc Combustion Chamber Volume
- 190cc Intake/90cc Exhaust Runner Volume
- 2.05 in. Intake/1.6 in. Exhaust Valve Diameter
- 0.625 in. Deck Thickness
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-138)
from
$0.30
Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)
from
$0.43
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Felpro – Cylinder Head Gasket Set (Part No.HS 8548 PT-6)
from
$88.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Felpro – Cylinder Head Gasket Set (Part No.HS 8554 PT)
from
$72.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Head sets contain gaskets and seals necessary for a valve grind or head reconditioning job
- Application specific design to ensure a perfect fit and premium seal
- Premium quality parts you can trust
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Contains all the parts needed to complete the repair unless otherwise noted
Sealed Power – Engine Valve Lifter (Part No.HT-2083)
from
$10.29
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Sealed Power – Engine Valve Lifter (Part No.HT-900)
from
$9.79
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Unsurpassed quality that you can trust
- Uses leading edge materials
- State-of-the-art manufacturing
- Exacting tolerances
- Meets or exceeds OEM specifications
Mr. Gasket – Valve Cover (Part No.9804)
from
$72.39
These valve covers are constructed of a heavy gauge steel that will also help to prevent leaks around sealing flanges. Sold as a pair.
Product Features:
See More
Product Features:
- Fits Ford small block
- Chrome plated steel construction
- Sold as a pair
- Chrome Plated
Edelbrock – Signature Series Valve Covers: Small Block Ford 221-351W 62-95, Chrome Steel (Part No.4460)
from
$74.99
The Edelbrock #4460 Signature Series Valve Covers are designed for Ford 260-289-302 (not Boss) and 351W V8 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
Product Features:
See More
Product Features:
- Small Block Ford 221-351W 62-95
- Tall
- Chrome Steel
- Set Of Two
- Rubber Grommets For Breather
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1751)
from
$0.95
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Sealed Power – Engine Rocker Arm Nut (Part No.MR-1823)
from
$0.72
Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
See More
Dorman – Steel Cup Expansion Plug 1-1/2 In., Height 0.480 (sold by each) (Part No.555-028)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each) (Part No.570-009)
from
$8.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1964 Ford Custom 500 Valve Cover and Cylinder Heads Categories
1964 Ford Custom 500 Valve Cover and Cylinder Heads
Maybe you’re in the middle of a full rebuild of that 1964 Ford Custom 500. Maybe you just need a couple of Valve Cover and Cylinder Heads. Either way, Advance Auto Parts has 47 different Valve Cover and Cylinder Heads in our inventory ranging from $0.30 to $1,751.99. That means you can find the exact parts or products you need to keep that 1964 Ford Custom 500 running smoothly.
Valve Cover and Cylinder Heads are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Ford Custom 500. Sealed Power, Felpro, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Valve Cover and Cylinder Heads for your 1964 Ford Custom 500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 62 reviews in this category, some of the top rated parts include Engine Push Rod with 5.0 stars and Valve Cover with 4.0 stars.
So if you’re in the market for aftermarket Valve Cover and Cylinder Heads to keep your 1964 Ford Custom 500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Valve Cover and Cylinder Heads Brands To Make Your 1964 Ford Custom 500 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Ford Custom 500 demands trusted brand parts and products to keep it running. Many trusted brands of Valve Cover and Cylinder Heads make up Advance Auto Parts’ inventory, and all are ready to help make your Custom 500 the best it can be. Be sure to browse some of our top Valve Cover and Cylinder Heads brands and parts.
Popular Felpro Valve Cover and Cylinder Heads
We carry Felpro parts in our stock across Cylinder Head Gaskets categories, plus more. For a 1964 Ford Custom 500, our most popular Felpro Valve Cover and Cylinder Heads include:
Top 1964 Ford Custom 500 Valve Cover and Cylinder Heads from Sealed Power
Sealed Power products are another trusted brand when it comes to Valve Cover and Cylinder Heads for your 1964 Ford Custom 500. Popular Sealed Power parts include:
FAQs for 1964 Ford Custom 500 Valve Cover and Cylinder Heads
What are the most purchased Valve Cover and Cylinder Heads for the 1964 Ford Custom 500?
Out of 47 Valve Cover and Cylinder Heads for the 1964 Ford Custom 500, the most popular in our inventory are:
from
$8.49
This product is not rated
Rubber Expansion Plug 1-1/2 In. – Size Range 1-1/2 In. – 1-5/8 In. (sold by each)
Rocker Arm Shaft Plugs
What are the top-rated 1964 Ford Custom 500 Valve Cover and Cylinder Heads?
Top-rated Valve Cover and Cylinder Heads for your 1964 Ford Custom 500 based on customer reviews/ratings are:
from
$72.39
(1)
Valve Cover
“When I replaced the engine in my 94 F150, I wanted to replace the valve covers due to some rust on the originals. The limited availabilty and cost of ”
from
$0.72
(1)
Engine Rocker Arm Nut
“Came in a very large box, that was not taped out well. I was just lucky the driver noticed they fell out”
