1964 Chevrolet Biscayne Differentials

Essential 1964 Chevrolet Biscayne Differentials

Yukon Gear – Pinion Install Kit For GM 12 Bolt Car Differential (Part No.13056)

Pinion Install Kit For GM 12 Bolt Car Differential

from

$212.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 12 bolt passenger car
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Yukon Gear – Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T (Part No.33406)

Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T

from

$25.99
Standard Open and positraction cross pin shaft for GM 12T, 12P, and 55T.

Product Features:
  • Cross pin shaft for GM 12 bolt passenger car and truck
  • Fits standard open and positraction applications
See More

USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)

Spartan Spring & Pin Kit, Fits Smaller Designs

from

$26.99
Spartan spring & pin kit, fits smaller designs.

Product Features:
  • Replacement spring and pin kit for Spartan Locker
  • Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
  • Includes 4 springs and 4 alignment pins
See More

Yukon Gear – Cross Pin Bolt (Part No.33067)

Cross Pin Bolt

from

$6.99
Cross pin bolt for Chrysler 8.25″, 9.25″ rear, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 7.2″ IFs, 7.5″, 7.6″, 8.0″, 8.25″ IFS & 8.5″.

Product Features:
  • Cross pin bolt for Chrysler 8.25″ and 9.25″ rear, Ford 7.5″ and 8.8″, GM 12 botl car and truck, 8.5″, 8.25″ IFS, 8.0″, 7.625″, 7.5″ and 7.2″ IFS
See More

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P

from

$21.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:
  • Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
  • Left hand thread
See More

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles (Part No.16040)

Positraction Internals For GM 12 Bolt Car And Truck With 33 Spline Axles

from

$305.99
Yukon positraction internals for GM 12P and 12T with 33 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits GM 12 bolt passenger car with 33 spline Dura Grip positraction
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Star Washer For GM 12 Bolt Posi Cross Pin Bolt (Part No.33348)

Star Washer For GM 12 Bolt Posi Cross Pin Bolt

from

$5.99
Star washer for GM 12 bolt posi cross pin bolt.

Product Features:
  • Star washer
  • Fits GM 12 bolt passenger car
See More

Driveworks – Oil Seal (Part No.S-8611N)

Oil Seal

from

$7.79
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$147.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Pro-King – Differential Ring Gear Bolt (Part No.742J935)

Differential Ring Gear Bolt

from

$0.91
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – GM 8.2" Crush Sleeve (Part No.33103)

GM 8.2" Crush Sleeve

from

$16.99
GM 8.2″ crush sleeve w/OEM ring & pinion (NOT AFTERMARKET ring & pinion). 2.470″ long.

Product Features:
  • Crush sleeve for GM 8.2″ with OEM ring and pinion set
  • 2.470″ tall
See More

Yukon Gear – Minor Install Kit For GM Chevy 55P And 55T Differential (Part No.12047)

Minor Install Kit For GM Chevy 55P And 55T Differential

from

$73.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits 1955-1964 GM truck and passenger car
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

Dorman – Differential Pinion Yoke Assembly (Part No.697-553)

Differential Pinion Yoke Assembly

from

$221.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:
  • Direct replacement – this differential end yoke matches the fit and construction of the original yoke
  • Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
  • Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
  • Validated fit – this differential end yoke has been tested to confirm accurate fit
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Dura Grip Positraction For GM 12 Bolt Car With 33 Spline Axles, 3.08 To 3.90 Ratio (Part No.26012)

Dura Grip Positraction For GM 12 Bolt Car With 33 Spline Axles, 3.08 To 3.90 Ratio

from

$856.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 12 bolt passenger car with 33 spline axles
  • 3.08-3.90 ratios only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Spider Gear Kit (Part No.16050)

Spider Gear Kit

from

$612.99
Yukon spider gear set for GM 8.2″ Dura Grip posi, 28 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:
  • Spider gear kit
  • Fits GM 8.2″ with Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Richmond Gear – Differential Spool (Part No.81-1030-1)

Differential Spool

from

$259.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Yukon Gear – Dura Grip Case, GM 12 Bolt Car, 4 Series (Part No.20105)

Dura Grip Case, GM 12 Bolt Car, 4 Series

from

$386.99
GM 12P DURA GRIP case, bare, 4.10 & up, 30spline & 33spline.

Product Features:
  • Fits GM 12 bolt passenger car with 33 spline axles
  • Does not include spider gears
See More

Pro-King – Differential Cover Gasket (Part No.742G303A)

Differential Cover Gasket

from

$31.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Install Kit For GM 8.2" Differential (Part No.11064)

Bearing Install Kit For GM 8.2" Differential

from

$269.99
Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 8.2″
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve , marking compound and brush.
See More

Yukon Gear – Bearing Race Driver (Part No.56022)

Bearing Race Driver

from

$188.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M86610 race
  • All steel construction
See More

National – Shaft Repair Sleeve (Part No.99170)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck (Part No.33380)

Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck

from

$7.99
Standard Open side gear thrust washer for 12P and 12T GM.

Product Features:
  • Side gear thust washer for GM 12 bolt passenger car and truck
  • Fits standard open differentials only
See More

Yukon Gear – Positraction Pinion Gear Thrust Washer With Step-Lip Inside For GM 12P And 12T – Fits New Eatons (Part No.33382)

Positraction Pinion Gear Thrust Washer With Step-Lip Inside For GM 12P And 12T - Fits New Eatons

from

$14.99
Positraction pinion gear thrust washer with step-lip inside for GM 12P and 12T. fits new Eatons.

Product Features:
  • Pinion gear thust washer for GM 12 bolt passenger car and truck
  • Fits positraction designs only
  • Has inside lip
See More

Pro-King – Differential Pinion Gear Washer (Part No.742G216)

Differential Pinion Gear Washer

from

$2.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 8.2" In A 3.73 Ratio (Part No.24151)

High Performance Ring & Pinion Gear Set For GM 8.2" In A 3.73 Ratio

from

$477.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits GM 8.2″
  • 8.20″ ring gear diameter
  • 25 spline pinion
  • 10 ring gear bolts
  • 3.73 ratio
See More

USA Standard Gear – Ring & Pinion Gear Set For GM 8.2" In A 4.11 Ratio (Part No.36206)

Ring & Pinion Gear Set For GM 8.2" In A 4.11 Ratio

from

$323.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 8.2″
  • 8.20″ ring gear diameter
  • 25 spline pinion
  • 10 ring gear bolts
  • 4.11 ratio
See More

1964 Chevrolet Biscayne Differentials

Maybe you’re in the middle of a full rebuild of that 1964 Chevrolet Biscayne. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 195 different Differentials in our inventory ranging from $4.29 to $1,619.99. That means you can find the exact parts or products you need to keep that 1964 Chevrolet Biscayne running smoothly.

Differentials are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Chevrolet Biscayne. National, Yukon Gear, and Motive Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1964 Chevrolet Biscayne, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 144 reviews in this category, some of the top rated parts include Differential Ring And Pinion with 4.7 stars and Differential Bearing Kit – Timken with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1964 Chevrolet Biscayne rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1964 Chevrolet Biscayne Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Chevrolet Biscayne demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Biscayne the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1964 Chevrolet Biscayne, our most popular Felpro Differentials include:
Differential Carrier Gasket
from $5.29
(2)
Differential Carrier Gasket
Automatic Transmission Differential Carrier Gaskets

Top 1964 Chevrolet Biscayne Differentials from National

National products are another trusted brand when it comes to Differentials for your 1964 Chevrolet Biscayne. Popular National parts include:
Bearings
from $16.99
(25)
Bearings
Differential Bearings
Bearings
from $25.49
(1)
Bearings
Front Differential Pinion Bearings

FAQs for 1964 Chevrolet Biscayne Differentials

What are the most purchased Differentials for the 1964 Chevrolet Biscayne?

Out of 195 Differentials for the 1964 Chevrolet Biscayne, the most popular in our inventory are:
3 Qt - Penzoil 80W90 Conventional Gear Oil
from $44.99
This product is not rated
3 Qt – Penzoil 80W90 Conventional Gear Oil
Differential Oil
Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt
from $9.99
This product is not rated
Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt
Differential Cover Bolts
Bearings
from $12.79
This product is not rated
Bearings
Differential Bearings

What are the top-rated 1964 Chevrolet Biscayne Differentials?

Top-rated Differentials for your 1964 Chevrolet Biscayne based on customer reviews/ratings are:
Differential Ring And Pinion
from $282.99
(7)
Differential Ring And Pinion
“as described worked okay.”
Differential Bearing Kit - Timken
from $160.99
(1)
Differential Bearing Kit – Timken
“great quality, price and delivery. couldn’t ask for more.”