1964 Chevrolet Biscayne Differentials

Name: Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck
Brand: Yukon Gear
SKU: 33380
Price: 7.99 USD

Find your specific 1964 Chevrolet Biscayne original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1964 Chevrolet Biscayne Differentials

from

$7.99

Standard Open side gear thrust washer for 12P and 12T GM.

Product Features:

Side gear thust washer for GM 12 bolt passenger car and truck
Fits standard open differentials only

from

$259.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits GM 8.2″
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$221.99

Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.

Product Features:

Direct replacement – this differential end yoke matches the fit and construction of the original yoke.
Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts.
Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
Validated fit – this differential end yoke has been tested to confirm accurate fit

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$2.49

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$425.99

Yukon positraction internals (0.806″ diameter) for GM 12P and 12T with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit does not include clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit GM 12 bolt passenger car and truck Dura Grip positraction with 30 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$484.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits GM 12 bolt passenger car
8.875″ ring gear diameter
30 spline pinion
12 ring gear bolts
3.08 ratio

from

$8.99

Positraction clutch guide.

Product Features:

Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
Compatible with Dura Grip positractions only

from

$332.99

Yukon standard open spider gear kit for 8.2″ GM with 28 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits GM 8.2″ open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$8.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$8.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$75.99

The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel, and comes complete with bolts and gaskets.

Product Features:

Chrome plated steel for looks
Includes bolts and gasket

from

$889.99

Differential

from

$2.59

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$404.99

Product Features:

Clutch kit
Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
14 piece kit
Carbon fiber clutches

from

$23.99

Standard Open and positraction cross pin shaft for GM 12T, 12P, and 55T.

Product Features:

Cross pin shaft for GM 12 bolt passenger car and truck
Fits standard open and positraction applications

from

$109.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.2″ & 8.5″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits GM 7.5″, 7.625″ 8.2″ and 8.5″
Includes carrier bearings and races and “super” carrier shim kit

from

$5.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$48.99

12P solid crush sleeve replacement spacer, pinion preload.

Product Features:

Crush sleeve eliminator kit for GM 12 bolt passenger car

from

$26.99

Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.

Product Features:

Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
Left hand thread

from

$463.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!

from

$23.99

Pinion nut washer for GM 12 bolt car & truck, 55-62 GM car & truck, GM 8.2″ & 63-79 Corvette.

Product Features:

Pinion nut washer for GM 12 bolt car and truck, 1955-1964 GM car and truck, GM 8.2″ and 1963-1979 Corvette.

from

$544.99

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$73.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits 1955-1964 GM truck and passenger car
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$111.99

Product Features:

GM10 BOLT 8.5″ 28 SPL INTERNAL KIT (OPEN)

from

$21.79

Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1965-1970 Buick, Olds, Pontiac, 10 bolt 8.20 inch ring gear.

Product Features:

.047″ thick cellulose/nitrile composite gasket material
Precision die cut
Reusable

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Popular 1964 Chevrolet Biscayne Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Mini Spools

Differential Ring and Pinions

Differential End Yokes

Differential Spools

Differential Carrier Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Automatic Transmission Differential Carrier Gaskets

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Ring and Pinion Kits

Differential Clutch Pack Clips

Differential Lock Washers

Maybe you’re in the middle of a full rebuild of that 1964 Chevrolet Biscayne. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 181 different Differentials in our inventory ranging from $4.29 to $1,604.99. That means you can find the exact parts or products you need to keep that 1964 Chevrolet Biscayne running smoothly.

Differentials are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1964 Chevrolet Biscayne. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1964 Chevrolet Biscayne, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 96 reviews in this category, some of the top rated parts include Differential Bearing Kit – Timken with 5.0 stars and Bearings with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1964 Chevrolet Biscayne rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1964 Chevrolet Biscayne Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1964 Chevrolet Biscayne demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Biscayne the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Automatic Transmission Differential Carrier Gaskets categories, plus more. For a 1964 Chevrolet Biscayne, our most popular Felpro Differentials include:

from $5.29

(2)

Differential Carrier Gasket

Automatic Transmission Differential Carrier Gaskets

Top 1964 Chevrolet Biscayne Differentials from Valvoline

Valvoline products are another trusted brand when it comes to Differentials for your 1964 Chevrolet Biscayne. Popular Valvoline parts include:

from $35.99

(17)

DEX/MERC Automatic Transmission Fluid, 1 Gallon

Differential Oil

from $14.49

(2)

DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

FAQs for 1964 Chevrolet Biscayne Differentials

What are the most purchased Differentials for the 1964 Chevrolet Biscayne?

Out of 181 Differentials for the 1964 Chevrolet Biscayne, the most popular in our inventory are:

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

from $9.99

This product is not rated

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

Differential Cover Bolts

from $12.99

This product is not rated

Bearings

Differential Bearings

What are the top-rated 1964 Chevrolet Biscayne Differentials?

Top-rated Differentials for your 1964 Chevrolet Biscayne based on customer reviews/ratings are:

from $160.99

(1)

Differential Bearing Kit – Timken

“great quality, price and delivery. couldn’t ask for more.”

from $25.49

(1)

Bearings

“This Is The One That Fit My 1971 CHEVY TRUCK 12 BOLT PINION REAR BACK BEARING”

from $21.29

(1)

Multi Purpose Seal

“It fit.”

1964 Chevrolet Biscayne Differentials

More 1964 Chevrolet Biscayne Differentials

Essential 1964 Chevrolet Biscayne Differentials

Yukon Gear – Standard Open Side Gear And Thrust Washer For GM 12 Bolt Car And Truck (Part No.33380)

Yukon Gear – Pinion Install Kit For GM 8.2" Differential (Part No.13066)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Dorman – Differential Pinion Yoke Assembly (Part No.697-553)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Motive Gear – Ring Gear Bolt (Part No.14066913)

Yukon Gear – Positraction Internals For GM 12 Bolt Car And Truck With 30 Spline Axles (Part No.16039)

Yukon Gear – High Performance Ring & Pinion Gear Set For GM 12P In A 3.08 Ratio (Part No.24448)

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Yukon Gear – Standard Open Spider Gear Kit For 8.2" GM With 28 Spline Axles (Part No.16051)

Motive Gear – Differential Pinion Seal (Part No.6818)

Pro-King – Differential Bearing Cup (Part No.742G256)

Mr. Gasket – Differential Cover Kit (Part No.9894)

Yukon Gear – Differential (Part No.26014)

Pro-King – Differential Pinion Gear Washer (Part No.742G216)

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

Yukon Gear – Standard Open And Positraction Cross Pin Shaft For GM 12T, 12P, And 55T (Part No.33406)

Yukon Gear – 8.5" & 8.2" GM Carrier Installation Kit (Part No.57008)

Felpro – Differential Carrier Gasket (Part No.RDS 11724)

Yukon Gear – Crush Sleeve Eliminator Kit For GM 12 Bolt Car (Part No.55045)

Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)

Powertrax – Grip LS Traction System (Part No.LS201028)

Yukon Gear – Pinion Nut Washer (Part No.33166)

Powertrax – No-Slip Traction System (Part No.9207822805)

Yukon Gear – Minor Install Kit For GM Chevy 55P And 55T Differential (Part No.12047)

Motive Gear – Differential Carrier Gear Kit (Part No.GM10BI)

Mr. Gasket – Differential Gasket (Part No.84)

Felpro – Differential Cover Gasket (Part No.RDS 55028-1)

Popular 1964 Chevrolet Biscayne Differentials Categories