1963 Oldsmobile Starfire Performance and Racing Products
More 1963 Oldsmobile Starfire Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1963 Oldsmobile Starfire, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1963 Oldsmobile Starfire Performance and Racing Products
Accel – Points Eliminator Kit (Part No.2010)
from
$105.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- More Accurate Ignition Timing
- Improves Performance And Fuel Economy
- Provides More Accurate Ignition Timing
- Easy To Install w/Hand Tools
- Reduced Maintenance
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Mr. Gasket – Lts Throttle Cable Brkt Chev (Part No.9885)
from
$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.
Product Features:
See More
Product Features:
- 2 in. adjustable range
- Includes necessary hardware
- Chrome plated
- Individually packaged
Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)
from
$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-31
- MSD 8225
Accel – Supercoil (Part No.140001)
from
$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 180 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Mr. Gasket – High Performance Thermostat (Part No.4365)
from
$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens At 195 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2002)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2003)
from
$22.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Mallory – Unilite Ignition Module (Part No.605)
from
$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)
from
$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Wiring Harness (Part No.29349)
PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)
from
$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.
Product Features:
See More
Product Features:
- PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
- Precision machined chromoly weights and center plate.
PerTronix – D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor (Part No.D9007)
from
$30.99
Wiring Harness and CapacitorPremium quality wire harness and capacitor insure good connection and “static free” operation.
Product Features:
See More
Product Features:
- PerTronix D9007 Flame-Thrower HEI Distributor 4-Pin Wire Harness/Capacitor
- Premium quality wire harness and capacitor.
PerTronix – D4260 Flame-Thrower Distributor Rotor HEI/EST Black (Part No.D4260)
from
$10.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4260 Flame-Thrower Distributor Rotor HEI/EST Black
- Made from hi-performance 60 KV rated alkyd molding compound.
Accel – Contact Set Hp 32 Oz (Part No.110128)
from
$54.39
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Mallory – Distributor Condenser (Part No.401)
from
$17.09
Distributor Condenser
Mr. Gasket – Alternator Bracket (Part No.5170)
from
$38.49
Original equipment style bracket in high quality chrome for years of service. Includes hardware.
Product Features:
See More
Product Features:
- Chrome Plated Heavy Gauge Steel
- Can Be Used For Other Applications
- Looks Better Than Painted
- Hardware included
Mr. Gasket – Alternator Bracket (Part No.4954)
from
$19.29
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated. Similar in design to OEM units, these brackets can be adapted to other engines.
Product Features:
See More
Product Features:
- Chrome plated
- Similar to OEM design
- May be adaptable to other applications
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Hays – Power Train (Part No.85-103)
from
$530.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.
Product Features:
See More
Product Features:
- Built As Matched Assembly
- Exceptional Performance
- Exceptional Durability
- Long Term Dependability
Hays – Power Train (Part No.85-114)
from
$653.99
High burst strength woven lining to withstand heat and higher engine RPM. Heavy-duty sprung hub assembly to allow smooth engagement and steady torque transfer without chatter. Recommended for high horsepower street vehicles in addition to occasional drag strip use.
Product Features:
See More
Product Features:
- Built As Matched Assembly
- Exceptional Performance
- Exceptional Durability
- Long Term Dependability
Hays – Power Train (Part No.85-113)
from
$641.99
Power Train
Accel – Distributor Cap And Rotor Kit (Part No.8123)
Accel – Distributor Cap And Rotor Kit (Part No.8124)
Accel – Cap/Rotor (Part No.8129)
from
$60.99
ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.
Product Features:
See More
Product Features:
- See catalog for application information
- Features 60K V Rated Alkyd Compound
Popular 1963 Oldsmobile Starfire Performance and Racing Products Categories
1963 Oldsmobile Starfire Performance and Racing Products
You count on your 1963 Oldsmobile Starfire to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 20 Performance and Racing Products ranging in price from $10.99 to $653.99, you’re sure to find everything you need for your 1963 Oldsmobile Starfire.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 6 different brands like Accel, Mr. Gasket, and K&N. 1963 Oldsmobile Starfire Performance and Racing Products start as low as $10.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 91 extensive product reviews on 1963 Oldsmobile Starfire Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Unilite Ignition Module with 5.0 stars and Mallory Kit: Unil Conv: Delco: V8 with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1963 Oldsmobile Starfire below to get started!
Top-Rated Performance and Racing Products Brands For Your 1963 Oldsmobile Starfire
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1963 Oldsmobile Starfire running right for years to come. In our inventory you’ll find brands like Accel, Mr. Gasket, K&N, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1963 Oldsmobile Starfire back on the road. Some of the top-rated K&N products in these categories are:
from
$22.29
(9)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
Performance Oil Filters
Top-Rated Accel Performance and Racing Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1963 Oldsmobile Starfire, and some of our most reviewed Accel parts include:
from
$42.49
(54)
Super Stock Replacement Coil for Improved Performance, Starting, and Power
Performance Coils
FAQs for 1963 Oldsmobile Starfire Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1963 Oldsmobile Starfire?
Out of 20 Performance and Racing Products for the 1963 Oldsmobile Starfire, the most popular in our inventory are:
from
$26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
from
$27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats
What are the top-rated 1963 Oldsmobile Starfire Performance and Racing Products?
Top-rated Performance and Racing Products for your 1963 Oldsmobile Starfire based on customer reviews/ratings are:
from
$85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
from
$134.99
(1)
Mallory Kit: Unil Conv: Delco: V8
“I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”
