1963 Ford Ranch Wagon Clutch Systems
Find Your Specific 1963 Ford Ranch Wagon Clutch Systems
Below you will find various in-demand Ford Clutch Systems, components and accessories for your 1963 Ranch Wagon. Advance Auto Parts has popular Ranch Wagon parts like Clutch Bell Housings, Clutch Kits, Clutch Pressure Plates and more. You’ll also find aftermarket and OEM Clutch Systems for other Ranch Wagon model years including
1966,
1967,
1968,
1969,
1970,
1971,
1972,
1973,
1974 and more. Select a category of 1963 Ford Ranch Wagon Clutch Systems below and start saving instantly.
Popular 1963 Ford Ranch Wagon Clutch Systems Categories
Essential Clutch Systems for 1963 Ford Ranch Wagons
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-572)
from
$40.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – ATP Manual Transmission Flywheel Ring Gear (Part No.ZA-502)
from
$37.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-501)
from
$26.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Hays – Hays450 Cltch 63-74 Ford V8:10.5In:10Sp (Part No.91-2001)
from
$499.99
Hays450 Cltch 63-74 Ford V8:10.5In:10Sp
LuK – Clutch Kit: 10 15/16" Disc Diameter, 1 1/16" Input Shaft Diameter, 10 Tooth Spline (Part No.07-027)
from
$171.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Hays – Hays650 Cltch 69-73 Must:Lever:11In:10Sp (Part No.92-2008)
from
$1210.00
Hays650 Cltch 69-73 Must:Lever:11In:10Sp
Hays – Hays450 Cltch 66-71 Ford Bb:11In:10Spl (Part No.91-2002)
from
$540.99
Hays450 Cltch 66-71 Ford Bb:11In:10Spl
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
National – Multi Purpose Bearing (Part No.2065)
from
$28.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-614034)
from
$23.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Bearing (Part No.614038)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1625)
from
$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Hays – Flywheels (Part No.12-242)
from
$495.99
Flywheels
ATP – M/T FLYWHEEL (Part No.Z-401)
from
$231.99
M/T FLYWHEEL
ATP – Automatic Transmission Flex Plate (Part No.Z-105)
from
$66.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – ATP Manual Transmission Flywheel (Part No.Z-372)
from
$519.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit And function just like the original part to ensure durability And long life.
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ARP Auto Racing – ARP Pressure Plate Clutch Cover Bolt Kit (Part No.250-2201)
from
$13.99
ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are rated at 200,000 psi. Both models feature a large diameter, low-profile head design. Complete with washers, where applicable.
Product Features:
See More
Product Features:
- 1/2″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 1985 & Earlier Ford 289-460 V8
- 5/16″-18 Thread Size
- 200,000 PSI
- 0.78″ Underhead Length
- Sold As A Kit
ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)
from
$14.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 180,000 PSI
- Sold As A Kit
- 0.78″ Underhead Length
Lakewood – Block Plate For 15210 (Part No.15741)
from
$218.99
Exact replacement safety block plates meet S.F. I. safety requirements. A must for block protection and required by most racing associations.
Product Features:
See More
Product Features:
- A Must For Block Protection
- Required By Most Racing Associations
- Must Be Used To Meet S.F.I Safety Requirements
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
Upgrade your 1963 Ford Ranch Wagon with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 1963 Ford Ranch Wagon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Clutch Systems are key to keeping your Ranch Wagon functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Clutch Systems for the 1963 Ford Ranch Wagon, designed to meet your needs without breaking the bank.
From
Clutch Bell Housing
replacements to
Clutch Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 1963 Ford Ranch Wagon at great prices.
Our Clutch Systems inventory for this model
ranges from just $13.99 to $999.99, with
an average price of $110.43.
Our 16 Clutch Systems in stock come from 6 trusted brands, so you’re sure to find the right part for your 1963 Ford Ranch Wagon without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals
and more to make sure your 1963 Ford Ranch Wagon is always ready to roll. We’re committed to providing you with everything you need to keep your Ranch Wagon in top shape, all in one place.
Start shopping confidently below for your 1963 Ford Ranch Wagon!
Best-Selling Clutch Bell Housings for 1963 Ford Ranch Wagons
Enhance the driving experience in your Ford with 2 quality Clutch Bell Housing components, starting at $218.99.
Lakewood – Block Plate For 15210 (Part No.15741)
from
$218.99
Exact replacement safety block plates meet S.F. I. safety requirements. A must for block protection and required by most racing associations.
Product Features:
See More
Product Features:
- A Must For Block Protection
- Required By Most Racing Associations
- Must Be Used To Meet S.F.I Safety Requirements
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
Most Popular 1963 Ford Ranch Wagon Clutch Kits
Customize your Ford with 1 Clutch Kits products
like Clutch Sets, all
priced under $499.99.
Hays – Hays450 Cltch 63-74 Ford V8:10.5In:10Sp (Part No.91-2001)
from
$499.99
Hays450 Cltch 63-74 Ford V8:10.5In:10Sp
Top Picks for 1963 Ford Ranch Wagon Clutch Pressure Plates
Upgrade Ford Ranch Wagons with top-quality Clutch Pressure Plates parts, including 2 OEM and aftermarket selections for your 1963 model.
ARP Auto Racing – For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (Part No.150-2201)
from
$14.99
The importance of pressure plate bolts in a racing or Hi Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- 180,000 PSI
- Sold As A Kit
- 0.78″ Underhead Length
ARP Auto Racing – ARP Pressure Plate Clutch Cover Bolt Kit (Part No.250-2201)
from
$13.99
ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are rated at 200,000 psi. Both models feature a large diameter, low-profile head design. Complete with washers, where applicable.
Product Features:
See More
Product Features:
- 1/2″ 12-Point Socket Size(s)
- 8740 Chromoly
- Black Oxide
- 1985 & Earlier Ford 289-460 V8
- 5/16″-18 Thread Size
- 200,000 PSI
- 0.78″ Underhead Length
- Sold As A Kit
In-Demand Clutch Release Bearings for 1963 Ford Ranch Wagons
Select from 5 premium Clutch Release Bearings parts for your 1963 Ford Ranch Wagon, with prices ranging from $23.99 to $51.99.
National – Multi Purpose Bearing (Part No.2065)
from
$28.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.614038)
from
$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1505)
from
$24.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.1625)
from
$25.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Release Bearing (Part No.S-614034)
from
$23.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Most Sold 1963 Ford Ranch Wagon Flywheels
Explore our best-selling Ford parts for the 1963 Ranch Wagon among 6 OEM and aftermarket options starting from $25.99.
Hays – Sfi Flexplate:Ford 57-Up 332-428: 429-46 (Part No.12-049)
from
$178.99
Sfi Flexplate:Ford 57-Up 332-428: 429-46
ATP – Manual Transmission Flywheel Ring Gear (Part No.ZA-503)
from
$32.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
Hays – Power Train (Part No.12-240)
from
$628.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
FAQs for 1963 Ford Ranch Wagon Clutch Systems
Which Clutch Systems are best-sellers for 1963 Ford Ranch Wagons?
Out of 16 Clutch Systems that fit 1963 Ford Ranch Wagons, the following parts are the top sellers:
- Multi Purpose Bearing (3273032) – $28.49
- Multi Purpose Bearing (5052777) – $51.99
- Multi Purpose Bearing (5040000) – $24.99
What’s the price range for 1963 Ford Ranch Wagon Clutch Systems?
Clutch System prices for the 1963 Ford Ranch Wagon start at $13.99 and go up to $999.99 for the most premium parts.
What’s the average price of a Clutch System for a 1963 Ford Ranch Wagon?
The average price for Clutch Systems for the 1963 Ford Ranch Wagon is $110.43. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Ford Ranch Wagon model years?
What are the cheapest Clutch Systems for my 1963 Ford Ranch Wagon?
The cheapest 1963 Ford Ranch Wagon Clutch Systems we carry in stock are:
- ARP Pressure Plate Clutch Cover Bolt Kit (11530156) – $13.99
- For Use With 1985 And Earlier 289/ 460 Ford V8, 180000Psi Tensile (11530068) – $14.99
- Clutch Release Bearing (5040043) – $23.99
- Multi Purpose Bearing (5040000) – $24.99
- Multi Purpose Bearing (5040221) – $25.99
What types of Clutch Systems do you sell for my 1963 Ford Ranch Wagon?
As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 1963 Ford Ranch Wagon:
Can I get help with 1963 Ford Ranch Wagon Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Clutch Systems and more.
What is your return policy for Ford Ranch Wagon Clutch Systems?
Advance Auto Parts keeps returns simple. For new Ford Ranch Wagon Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
