1963 Ford F-100 Pickup Cooling and Climate Controls
More 1963 Ford F-100 Pickup Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1963 Ford F-100 Pickup, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1963 Ford F-100 Pickup Cooling and Climate Controls
Felpro – Engine Water Pump Gasket (Part No.35211)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
KAI – Radiator Support (Part No.GMK3143320611)
from
$589.99
New Goodmark Radiator Support Assembly
Product Features:
See More
Product Features:
- 2WD
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Felpro – WATER OUTLET GASKET (Part No.35041 T)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Problem-solving gaskets featuring advanced sealing technologies designed specifically for the repair environment
- PermaDryPlus water outlet gaskets utilize rigid carrier construction and silicone sealing beads to ensure a long-lasting seal, including those with warped housing flanges
- Validated for fit, form, and function
- Quality that you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Carquest Premium – Universal Standard Rotation Thermal Heavy Duty Fan Clutch (Part No.216087)
from
$125.99
Product Features:
See More
- Designed, tested, and built by application
- OE performance, fit, and appearance
- Precision machined
- Out of box installation
National – Bearings (Part No.5106-WCC)
from
$54.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.84916)
from
$34.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.
Product Features:
See More
Product Features:
- Meets and/or exceeds OEM standard
- Includes quality gasket or O-ring to ensure proper seal (where applicable)
- Coated with corrosion and rust inhibitor
- 100% leak tested
- Direct-fit replacement for ease of installation
Motorad UltraStats – Thermostat: 192 Degrees (Part No.5244-192)
from
$14.29
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14556)
from
$22.99
Belt-Driven Fan Spacer Kit
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Felpro – Engine Water Pump Gasket (Part No.35044)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Carquest Standard – Reman York 209-210 Compressor w/o Clutch (Part No.DW57064)
from
$189.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.
Product Features:
See More
Product Features:
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
- All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
- All units have new seals, O-rings, gaskets and clutch bearings
- Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
- Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
- Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
- Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
- Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
- Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)
from
$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps prevent coolant injuries
- Fahrenheit and centigrade readings
- Color-coded temperature ranges
- Integrated coolant reclamation valve
- Improves under-hood appearance
- Chromed crown with a colored trim ring
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$47.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1094)
from
$5.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1097)
from
$16.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Engine Coolant Temperature Sending Unit Switch Connector (Part No.PTA1217)
from
$5.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Designed for the OE distributor as a direct replacement part
Edelbrock – Water Pump for Small-Block Ford 351W in Black Finish (Part No.88433)
from
$358.99
Edelbrock #88433 Water Pump Ford 1970-78 302 & 1970-87 351w v8 black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cool
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.625 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 5.70 in. Block To Hub Height
- Black Finish
Carquest Premium – New Premium Water Pump (Part No.T4099)
from
$57.99
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. A
Product Features:
See More
Product Features:
- This pump is used on accessory belt driven applications
- Used mostly on models equipped with a fan clutch
- It is highly recommended that the fan clutch be replaced with the water pump
- All gaskets or seals necessary for installation are supplied with pump
- Durable housing features precisely machined mounting surfaces for proper sealing
Felpro – Multi-Purpose O-Ring (Part No.5511)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Flex A Lite – X-Treme S-Blade Electric Fan (Part No.480)
from
$519.99
X-Treme S-Blade Electric Fan
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Flex A Lite – 27 in. Electric Fan (Part No.295)
from
$569.99
27 in. Electric Fan
Flex A Lite – 400 Series Nylon Flex Fan (Part No.418)
from
$34.99
400 Series Nylon Flex Fan
Popular 1963 Ford F-100 Pickup Cooling and Climate Controls Categories
1963 Ford F-100 Pickup Cooling and Climate Controls
You count on your 1963 Ford F-100 Pickup to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 43 Cooling and Climate Controls ranging in price from $1.99 to $589.99, you’re sure to find everything you need for your 1963 Ford F-100 Pickup.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 9 different brands like Imperial, Carquest Premium, and Felpro. 1963 Ford F-100 Pickup Cooling and Climate Controls start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 627 extensive product reviews on 1963 Ford F-100 Pickup Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Thermocap Radiator Cap with 3.2 stars and Radiator Cap: 7 PSI with 4.8 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1963 Ford F-100 Pickup below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1963 Ford F-100 Pickup
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1963 Ford F-100 Pickup running right for years to come. In our inventory you’ll find brands like Imperial, Carquest Premium, Felpro, and even more.
Popular Flex A Lite Cooling and Climate Controls
You’ll find popular Flex A Lite brand products across Engine Cooling Parts. All are waiting to get your 1963 Ford F-100 Pickup back on the road. Some of the top-rated Flex A Lite products in these categories are:
Top-Rated Imperial Cooling and Climate Controls
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Cooling and Climate Controls for your 1963 Ford F-100 Pickup, and some of our most reviewed Imperial parts include:
FAQs for 1963 Ford F-100 Pickup Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1963 Ford F-100 Pickup?
Out of 43 Cooling and Climate Controls for the 1963 Ford F-100 Pickup, the most popular in our inventory are:
What are the top-rated 1963 Ford F-100 Pickup Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1963 Ford F-100 Pickup based on customer reviews/ratings are:
from
$47.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”
from
$6.29
(8)
Radiator Cap: 7 PSI
“This is a lower PSI cap for a V10 – fits just like the factory 16psi cap.”
from
$38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
