1962 Pontiac Catalina Performance and Racing Products

Essential 1962 Pontiac Catalina Performance and Racing Products

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1623)

Performance Valve Cover Gasket Set

from

$23.29
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:
  • Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Dust Cap (Part No.2485)

Dust Cap

from

$12.09
If you have custom steel or mag wheels that are not designed without a provision for a center cap, you’re probably looking at an ugly stock dust cap in the center of your front wheels. This chrome dust cap fixes that problem, and is a direct replacement for stock cap 1.790 inches in diameter. Two per set.

Product Features:
  • Chrome Plated Steel
  • Set of 2 Caps
  • Easy Installation
  • 2 Per Set
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6086)

Oil Pan Bolt Kit

from

$30.19
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Mr. Gasket – Alternator Bracket (Part No.9850)

Alternator Bracket

from

$25.99
Hold your alternator securely in place with Mr. Gasket chrome alternator bracket. Chrome plated heavy gauge steel for long lasting good looks. Must be used with #9852.

Product Features:
  • Chrome Plated Steel
  • F-Style
  • Heavy Gauge Steel Construction
  • Fits Small Block Chevy 265-400 CID
  • Must Be Used With Part 9852
See More

Accel – Distributor Cap And Rotor Kit (Part No.8123)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Edelbrock – Water Pump for Pontiac, Standard Rotation in Black Finish (Part No.88563)

Water Pump for Pontiac, Standard Rotation in Black Finish

from

$385.99
Edelbrock #88563 Water Pump Pontiac 389-455 standard rotation black ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super cooli

Product Features:
  • Standard Impeller Rotation
  • 0.625 in. Pilot Shaft
  • 0.750 in. Ball/Ball Bearing
  • 4.50 in. Block To Hub Height
  • Black Finish
See More

Spectre – Valve Cover (Part No.5272)

Valve Cover

from

$72.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1962-1979 Pontiac V8 engines, this valve cover features chrome plated steel construction and a smooth design. Sold in pairs, this tall profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.

Product Features:
  • Designed for 1962-1979 Pontiac V8 engines
  • Baffled for breather system compatibility
  • Sold in pairs
  • Triple chrome-plated steel construction
  • Tall profile
  • Features OEM style sealing edge
See More

Accel – Contact Set Hp 32 Oz (Part No.110128)

Contact Set Hp 32 Oz

from

$54.39
Heavy duty points sets are quipped with extra think contack arms to prevent flexing at high RPMS. Large radiused tungsten contants provide crisp circuit breaking for peak coil output. High strength phenolic rubbing blocks provide superior durability when used with heavy duty spring tension.

Product Features:
  • Extra Thick Contact Arms
  • Large Radius Tungsten Contacts
  • High Strength Phenolic Rubbing Blocks
  • Prevents Points Float
  • Moisture-Proof Buna-N Condenser
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2006)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Mr. Gasket – Ultra Seal: Sure-Lock Rocker Arm Nuts (Part No.923G)

Ultra Seal: Sure-Lock Rocker Arm Nuts

from

$87.19
Designed to keep the rocker arms positively locked for precise and critical valve train adjustments. Manufactured from quality grade steel, then heat-treated for extra strength and plated with a durable finish. Kits include 16 rocker arm nuts with socket head set screws and one hex key wrench.

Product Features:
  • (16) Rocker Arm Nuts w/ Locks 3/8″-24 Threads
  • Shank O.D. .540″
  • Includes Locks and Hex Wrench
  • High-Quality Grade Steel
  • Heat-Treated For Ex Strength
  • Plated With Durable Gold Tone Finish
See More

Mr. Gasket – Ultra Seal: Head Gasket (Part No.5810G)

Ultra Seal: Head Gasket

from

$59.99
Mr. Gasket Ultra-Seal Head Gaskets are a five layer (graphite core/perforated steel outer layers) composite construction. The graphite core has excellent thermoconductivity (transfers heat) away from hot spots in head preventing gasket burn-out. They provide excellent stability, compressibility and high temperature endurance. A high temperature silicone coating ensures sealing of engine fluids. Compatible with cast iron or aluminum heads, they will not brinell (indent) aluminum cylinder heads. Suitable for high performance street, drag race and oval track use. Sold individually.brbrGasket Bore 4.250 inch, Compressed thickness 0.038 inch

Product Features:
  • Five layer (graphite core/perforated steel outer layers) composite construction
  • Graphite core has excellent thermo-conductivity-transfers heat away from hot spots in head preventing gasket burn-out
  • Provides excellent stability, compressibility and high temperature endurance
  • Coated with high temperature silicone to ensure sealing of engine fluids
  • Will not brinell (indent) aluminum cylinder heads
  • For high performance street, drag race and oval track use
  • Compatible w/High Octane Fuel
  • Compatible With Exotic Fuel
See More

Mr. Gasket – Lts Throttle Cable Brkt Chev (Part No.9885)

Lts Throttle Cable Brkt Chev

from

$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.

Product Features:
  • 2 in. adjustable range
  • Includes necessary hardware
  • Chrome plated
  • Individually packaged
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5848)

Ultra Seal: Intake Gasket

from

$36.49
Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Silicone Bead Around Port
  • Creates Tight Leak proof Seal
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1800)

PERFORMANCE OIL PAN GASKET SET

from

$18.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

PerTronix – D9001 Flame-Thrower HEI Distributor Advance Curve Kit (Part No.D9001)

D9001 Flame-Thrower HEI Distributor Advance Curve Kit

from

$26.99
Mechanical Advance Curve Ki tPrecision machined chromoly weights and center plate eliminate erratic timing. Three sets of springs, guide bushings and complete installation instructions make recurving your distributor easy.

Product Features:
  • PerTronix D9001 Flame-Thrower HEI Distributor Advance Curve Kit
  • Precision machined chromoly weights and center plate.
See More

Hurst – Manual Shifter, Super Street (Part No.3917535)

Manual Shifter, Super Street

from

$499.99
The industry standard for over 30 years, this shifter offers state of the art transmission control for popular manual transmissions. Dedicated applications assure a custom fit to a wide variety of vehicles.

Product Features:
  • 7.5 in. Tall Chrome Plated Stick
  • High Mounting Design
  • Heat Treated Components
  • Adjustable Gear Stops
  • Complete With Hardware
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1423)

Exhaust Manifold Gasket Set

from

$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Edelbrock – Performer-Plus Camshaft Kit for Pontiac 350-403 V8 (Part No.2157)

Performer-Plus Camshaft Kit for Pontiac 350-403 V8

from

$358.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Accel – Points Eliminator Kit (Part No.2010)

Points Eliminator Kit

from

$105.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • More Accurate Ignition Timing
  • Improves Performance And Fuel Economy
  • Provides More Accurate Ignition Timing
  • Easy To Install w/Hand Tools
  • Reduced Maintenance
  • Thermal Clad Based Surface Mount Construction
  • Utilizes Specialized Electronic Circuitry
  • Ignition Timing Is Stable From 1 To 10000rpm
See More

Edelbrock – Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet (Part No.1405)

Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet

from

$394.99
The Edelbrock 1405 Performer Series 600 CFM manual choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characteristics make the 1405 Performer Series 600 CFM manual choke carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carburetor is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to “hold a tune”, so once it is tuned, the carburetor stay’s tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The lightweight all-aluminum body features a two-piece body that resists warping and is compatible with gasohol and blended fuels. The simple tub-type bowls and rear-pivot floats all contribute to a carburetor that’s reliable, user-friendly and is easily tunable for miles and miles of trouble-free operation.

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Manual Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Edelbrock – Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Black Finish (Part No.21563)

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Black Finish

from

$545.99
Edelbrock part #21563 Performer Pontiac intake manifold is designed for 1965-79 Pontiac 326-455 c.i.d. V8’s (except Ram Air V and 265/301 V8’s). Provides great throttle response for performance you can feel. Ideal for cars, 4x4s, tow vehicles, RVs and boa

Product Features:
  • Idle-5500 RPM Range
  • Dual Plane Type-4150 Style Flange
  • 5.5 in. Front Height, 6.05 in. Center Height, 6.6 in. Rear Height
  • Black Powder Coated Finish
  • Non-EGR
See More

Edelbrock – Performer Intake Manifold for Olds 400-455, Non-EGR, Satin (Part No.2151)

Performer Intake Manifold for Olds 400-455, Non-EGR, Satin

from

$494.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

MSD Ignition – Distributor; Pontiac V8; Ready-to-Run (Part No.8528)

Distributor; Pontiac V8; Ready-to-Run

from

$569.99
Do yourself and your poncho a favor and replace your points distributor with a Ready-to-Run model. You’ll never have to adjust or replace the points again and your car will run better thanks to the hot MSD sparks. Inside the CNC-machined billet housing the unit incorporates a magnetic pickup that never wears out. Plus, the distributor has a built in ignition module so there is no need to mount an external MSD Ignition control. The module delivers up to 7.5 A to the coil creating a stout inductive spark. Not only do you get the benefits of electronic triggering, but your engine will awaken with powerful sparks from the ignition module. This improves combustion of the fuel mixture resulting in quick starts, a smooth idle and great performance.

Product Features:
  • Simple and clean three wire installation
  • CARB E.O. Approved
  • Does not require an MSD Ignition Control
  • Mech. advance assem. can be locked out for crank trigger systems
  • Maintenance-free magnetic pickup and precision reluctor
  • Creates stable trigger signals throughout the rpm range
  • Vacuum advance canister for improved economy (can be locked out)
  • Easy-to-adjust mech. advance w/supplied springs and stop bushings
  • Built-in module produces a 7.5 amp single spark through high rpm
  • Includes built-in Rev Limiter
See More

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

1962 Pontiac Catalina Performance and Racing Products

You count on your 1962 Pontiac Catalina to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 47 Performance and Racing Products ranging in price from $10.99 to $622.99, you’re sure to find everything you need for your 1962 Pontiac Catalina.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 12 different brands like Accel, Mr. Gasket, and Edelbrock. 1962 Pontiac Catalina Performance and Racing Products start as low as $10.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 3,630 extensive product reviews on 1962 Pontiac Catalina Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Unilite Ignition Module with 5.0 stars and Automatic Shifter, Unimatic Shifter with 4.3 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1962 Pontiac Catalina below to get started!

Top-Rated Performance and Racing Products Brands For Your 1962 Pontiac Catalina

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1962 Pontiac Catalina running right for years to come. In our inventory you’ll find brands like Accel, Mr. Gasket, Edelbrock, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 1962 Pontiac Catalina back on the road. Some of the top-rated K&N products in these categories are:

Top-Rated Edelbrock Performance and Racing Products


If Edelbrock are what you’re looking for, our inventory holds plenty. We stock Edelbrock brand Performance and Racing Products for your 1962 Pontiac Catalina, and some of our most reviewed Edelbrock parts include:

FAQs for 1962 Pontiac Catalina Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1962 Pontiac Catalina?

Out of 47 Performance and Racing Products for the 1962 Pontiac Catalina, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats
High Performance Thermostat
from $27.49
This product is not rated
High Performance Thermostat
Performance Engine Coolant Thermostats

What are the top-rated 1962 Pontiac Catalina Performance and Racing Products?

Top-rated Performance and Racing Products for your 1962 Pontiac Catalina based on customer reviews/ratings are:
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Automatic Shifter, Unimatic Shifter
from $269.99
(3)
Automatic Shifter, Unimatic Shifter
“Super easy to install, works nice.”
Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)
from $427.99
(2)
Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)
“Put carb on rock crawler. Climb lots of hills and the carb works great. No loss of fuel when climbing steep grade. Does what I bought it to do.”