1979 Pontiac Catalina Performance and Racing Products

Essential 1979 Pontiac Catalina Performance and Racing Products

Edelbrock – Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire (Part No.5487)

Performer-Plus Camshaft Kit for Buick 231-252 V6 Even Fire

from

$367.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched To Performer Intake PN[5486]
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)

Performer Series Retainer (Qty 16)

from

$100.99
Product Features:
  • Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
  • Set of 16
  • 1.50 in. Outside Diameter
  • Steel Material
  • Black Oxide Finish
See More

Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

Mallory Kit: Unil Conv: Delco: V8

from

$134.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

Product Features:
  • Easy Installation
  • Improved Fuel Economy
  • Reduced Maintenance
  • Accurate Timing
  • Improved Performance
  • Provides A Simple Conversion
  • No Moving Parts To Wear Out
See More

Mr. Gasket – Differential Cover Kit (Part No.9896)

Differential Cover Kit

from

$64.99
The Mr. Gasket chrome plated rear end cover is made from heavy-gauge steel and comes complete with bolts and gaskets.

Product Features:
  • Chrome plated steel for looks
  • Includes bolts and gasket
See More

Accel – Ignition/Electrical (Part No.130120)

Ignition/Electrical

from

$16.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:
  • Max stability for all RPM ranges
  • Heavy duty for maximum energy transfer
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)

Control Arm Bump Stop Set

from

$11.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

Mr. Gasket – High Performance Thermostat (Part No.4365)

High Performance Thermostat

from

$27.49
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 195 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Accel – High Energy Ignition Coil for GM HEI – 1973-1991 (Part No.140003)

High Energy Ignition Coil for GM HEI - 1973-1991

from

$100.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Dr-31
  • MSD 8225
See More

Energy Suspension – Control Arm Bushing Set (Part No.3.3105G)

Control Arm Bushing Set

from

$109.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G885373)

Performance Differential Ring and Pinion

from

$229.99


Product Features:
  • GM 10BL 8.5 R/P 3.73 FRT/REAR MGP
See More

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5848)

Ultra Seal: Intake Gasket

from

$36.49
Mr. Gasket Ultra-Seal Intake Manifold Gasketss are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For original equipment replacement, high performance street, drag race and oval track use. Includes distributor gasket.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Silicone beading on both sides of each gasket
  • For OE replacement, high performance street, drag race and oval track use
  • Silicone Bead Around Port
  • Creates Tight Leak proof Seal
See More

B & M – Holeshot 2000 (Part No.20416)

Holeshot 2000

from

$369.99
HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) Application: HoleShot 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot c

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Edelbrock – Cylinder Head Gasket Set for Pontiac (Part No.7381)

Cylinder Head Gasket Set for Pontiac

from

$55.99
Product Features:
  • Cylinder Head Gasket
  • 1961-1980 326-389-400-421-428-455
See More

Accel – Distributor Cap And Rotor Kit (Part No.8123)

Distributor Cap And Rotor Kit

from

$48.49


Product Features:
  • Heavy Duty Cap and Rotor Kit
  • With Brass Inserts
See More

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Trans Mount: Urethane-Chevy

from

$84.99
Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:
  • Durable Polyurethane
  • Absorbs Vibration
  • Last Longer Than Rubber
  • Built-In Safety Lock
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

MSD Ignition – Wire Set; Street Fire; SBC; Socket Distributor Cap over VC (Part No.5565)

Wire Set; Street Fire; SBC; Socket Distributor Cap over VC

from

$72.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:
  • Helically wound conductor suppresses electro and radio noise
  • Kevlar core combination for great strength and durability
  • Heavy Duty Terminals For Secure Connection
  • 8mm silicone and synthetic jacket resists heat and abrasion
  • 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
  • Silicone Boots Protect Against High Exhaust Temps
See More

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455 (Part No.42-222-4)

Xtreme Energy 218/224 Hydraulic Flat Cam for Oldsmobile 260-455

from

$548.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:
  • Excellent performance in street carbureted applications.
  • More vacuum allows an increase in duration for improved performance and assists power brakes.
  • Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
  • Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
See More

Accel – Adj:Vac Adv GM V8 Hei Dist (Part No.31035)

Adj:Vac Adv GM V8 Hei Dist

from

$48.49
This unit permits a seamless wide range of adjustment to both amount and rate of ignition advance. This unit helps increase horsepower and throttle response. It provides maximum spark advance while preventing detonation or “pinging”. This kit includes an allen wrench for easy adjustment along with instructions.

Product Features:
  • Adjustable Vacuum Advance
  • Increases Horsepower And Throttle Response
  • Includes Allen Wrench For Adjustments
  • Instantly Increase Horsepower
  • Maximum Possible Spark Advance
  • Not Legal For Sale/Use In CA
See More

FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1814)

PERFORMANCE OIL PAN GASKET SET

from

$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
  • With steel core to provide ultimate excellent blowout resistance.
  • Not intended for use in emission controlled vehicles.
See More

Mr. Gasket – Alternator (Part No.5123)

Alternator

from

$363.99
These Mr. Gasket chrome alternators are remanufactured to exceed original equipment specifications for maximum dependability.

Product Features:
  • Fits Most 1966-’72 GM Vehicles
  • Bolt Spacing 6.6″
  • 80 Amps
  • GM 10DN Style Alternator
  • Chrome Plated Finish
  • includes V-Belt Pulley – 1-Groove
  • Use w/ OEM Style Regulator
See More

Motive Gear – Differential Mini Spool (Part No.MS12C)

Differential Mini Spool

from

$108.99


Product Features:
  • MINI SPOOL GM12 BOLT CAR & TRUCK STRANGE # 088430
See More

Mr. Gasket – Oil Pan Bolt Kit (Part No.6085)

Oil Pan Bolt Kit

from

$17.49
The special self locking oil pan bolts, use a smaller-than-standard hex head is ideal for tight spaces. Because of the hex flange head design, it will not fall back into the socket wrench, allowing for easier installation. Special under head serrations prevent loosening and the wide flange head distributes uniform clamping pressure for an ultra gasket seal. Bolts are zinc plated, grade 5.

Product Features:
  • Ideal For Tight Spaces
  • Serrations Prevent Loosening
  • Flange Distributes Pressure
  • Zinc Plated Bolts
  • Grade 5 Material
  • Easy Installation
See More

Spectre – Water Neck; Olds (Part No.4733)

Water Neck; Olds

from

$26.99
Spectre’s Oldsmobile V8 water neck fits Oldsmobile 330, 350, 425 and 455 engines. This water neck has been designed around the OEM specifications and has a chrome plated finish for a lasting look that fits great. This water neck has an additional by-pass hose connection and includes the bolts.

Product Features:
  • Fits Oldsmobile 330, 350, 425 and 455 engines
  • Chrome plated
  • Bolts included
  • Designed for OEM fit
  • Easy to install
  • O-ring/gasket not included
See More

Edelbrock – Exhaust Manifold Gasket Set for Pontiac (Part No.7281)

Exhaust Manifold Gasket Set for Pontiac

from

$30.99
Product Features:
  • Designed To Match Port Openings Of Cylinder Heads
  • Excellent Free-Flowing Seal
See More

Competition Cams – VALVE SEALS, TEFLON 3/8" 1 ST (Part No.505-16)

VALVE SEALS, TEFLON 3/8" 1 ST

from

$31.99
COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:
  • Work with .530″ guides and 3/8″ valve stem diameter
  • Valve stem oil seals keep unwanted oil from entering the combustion chamber
  • Several different types of valve seals are offered
See More

Edelbrock – Performer-Plus Camshaft Kit for Pontiac 350-403 V8 (Part No.2157)

Performer-Plus Camshaft Kit for Pontiac 350-403 V8

from

$358.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2904)

PERFORMANCE REAR MAIN SEAL SET

from

$16.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

1979 Pontiac Catalina Performance and Racing Products

You count on your 1979 Pontiac Catalina to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 107 Performance and Racing Products ranging in price from $5.99 to $825.99, you’re sure to find everything you need for your 1979 Pontiac Catalina.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 19 different brands like K&N, Mr. Gasket, and Edelbrock. 1979 Pontiac Catalina Performance and Racing Products start as low as $5.99!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 1,248 extensive product reviews on 1979 Pontiac Catalina Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.7 stars and Spectre Replacement Air Filter with 5.0 stars.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1979 Pontiac Catalina below to get started!

Top-Rated Performance and Racing Products Brands For Your 1979 Pontiac Catalina

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1979 Pontiac Catalina running right for years to come. In our inventory you’ll find brands like K&N, Mr. Gasket, Edelbrock, and even more.

Popular Competition Cams Performance and Racing Products

You’ll find popular Competition Cams brand products across Performance Engines. All are waiting to get your 1979 Pontiac Catalina back on the road. Some of the top-rated Competition Cams products in these categories are:
VALVE SEALS, TEFLON 3/8" 1 ST
from $31.99
(1)
VALVE SEALS, TEFLON 3/8" 1 ST
Performance Engine Valve Stem Seal Sets

Top-Rated K&N Performance and Racing Products


If K&N are what you’re looking for, our inventory holds plenty. We stock K&N brand Performance and Racing Products for your 1979 Pontiac Catalina, and some of our most reviewed K&N parts include:

FAQs for 1979 Pontiac Catalina Performance and Racing Products

What are the most purchased Performance and Racing Products for the 1979 Pontiac Catalina?

Out of 107 Performance and Racing Products for the 1979 Pontiac Catalina, the most popular in our inventory are:
High Performance 180 Degree Thermostat for Increased Flow
from $26.99
(20)
High Performance 180 Degree Thermostat for Increased Flow
Performance Engine Coolant Thermostats

What are the top-rated 1979 Pontiac Catalina Performance and Racing Products?

Top-rated Performance and Racing Products for your 1979 Pontiac Catalina based on customer reviews/ratings are:
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
from $394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
Spectre Replacement Air Filter
from $41.49
(6)
Spectre Replacement Air Filter
“Made my truck run much smoother!”
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
from $397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”