1962 Ford Falcon Steering and Chassis Parts

Essential Steering and Chassis Parts for 1962 Ford Falcons

MOOG – Idler Arm (Part No.K8106)

Idler Arm

from

$110.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Heavy-duty design
  • Loose or worn chassis parts can lead to premature tire wear
  • Engineered steel composition results in a stronger component
  • Powdered metal gusher bearing design enables grease to flow through bearing to
  • Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Rare Parts – Tie Rod End (Part No.RP25437)

Tie Rod End

from

$43.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Greaseable
  • Precision machining tolerances
  • Heat treated components
  • Low friction
See More

Whiteline – Sway Bar 18Mm Heavy Duty (Part No.BFR1-KU4)

Sway Bar 18Mm Heavy Duty

from

$276.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 18mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
See More

Rare Parts – Idler Arm Repair Kit (Part No.RP20266)

Idler Arm Repair Kit

from

$134.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Improves steering response
  • Repairs worn components
  • Reduces vibration
  • Reduces tire wear
See More

Whiteline – Sway Bar Mount Saddle (Part No.KBR10)

Sway Bar Mount Saddle

from

$49.99
Universal sway bar mount saddle. Check out the universal sway bar D mount range offering 14-30mm diameter bushings.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W22789G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 28mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

MOOG – Idler Arm Bushing (Part No.K8103)

Idler Arm Bushing

from

$16.29
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
  • Enlarged ball joint receptacle in control arm can cause loose ball joint fit – has oversized housing for secure fit
See More

Lares – Remanufactured Manual Steering Gear Box (Part No.8677)

Remanufactured Manual Steering Gear Box

from

$315.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Lares – New Steering Coupling Assembly (Part No.202)

New Steering Coupling Assembly

from

$52.99
New Rag Joint steering couplers are carefully engineered to OE specifications. All units are complete with lower casting, rubber disk and mounting bolts already assembled for easy, trouble free installation. All units are carefully packaged to insure safe arrival at your door
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Rare Parts – Ball Joint (Part No.RP10141)

Ball Joint

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Heat treated components
  • Dust seal to prevent contamination
  • Restores vehicle handling
  • Restores OE alignment
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

MOOG – Control Arm and Ball Joint Assembly (Part No.RK8123)

Control Arm and Ball Joint Assembly

from

$51.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
  • ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
  • ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
See More

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Tie Rod End Adjusting Sleeve

from

$28.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Coated for corrosion resistance
  • Engineered to meet or exceed OE Performance
  • Wrench flats on housing and stud provide easy installation and alignment adjustment.
  • Polished Stud ball provides low socket torque.
  • Stud design is optimized to provide ideal stud swing and strength for each application.
See More

Energy Suspension – Strut Rod Bushing Set (Part No.4.7111G)

Strut Rod Bushing Set

from

$30.99
These performance polyurethane components help reduce common wheel roll-under. This occurs when stopping abruptly, especially when using performance tires for both front of rear drive vehicles is so equipped. Replaces that original, short lived and too-soft O.E.M, rubber on front wheel drive vehicles – diminishes wheel hop and traction loss during standing start accelerations. Better maintains proper alignment under extreme conditions. Made of Energy’s Hyper-Flex performance polyurethane to add both performance and durability.

Product Features:
  • Made from HYPER-Flex Polyurethane
See More

MOOG – Stabilizer Bar Link Kit (Part No.K700531)

Stabilizer Bar Link Kit

from

$18.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • The Grade 8 coated bolt makes the link extremely durable
  • Features an enhanced solid hex spacer of strong, lightweight, anodized T-6 aluminum to resist corrosion
  • Heavy-duty bushings made from new urethane material are extremely durable, absorbing road shocks while resisting oil, heat and ozone
  • Bushings feature new patent-pending stress reliefs to improve durability and sensitivity to installation torque
  • Black phosphate barrel nut and washers provide corrosion protection.
See More

Rare Parts – Center Link (Part No.RP25676)

Center Link

from

$161.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Forged steel
  • Heat treated components
  • Improves steering response
See More

Rare Parts – 11/16-18 Nut (Part No.RP15259)

11/16-18 Nut

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Retains bushings
See More

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

National – Multi Purpose Seal (Part No.240414)

Multi Purpose Seal

from

$4.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E. (Part No.36270)

Power Steering Pressure Hose Assembly, 1/4" Male Inv. Flare x 3/8" Female S.A.E.

from

$211.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Carquest Premium – Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 3/8" Female S.A.E. (Part No.35387)

Power Steering Pressure Hose Assembly, 5/16" Male Inv. Flare x 3/8" Female S.A.E.

from

$69.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More

Rare Parts – Stab Bar Link Kit (Part No.RP22196)

Stab Bar Link Kit

from

$36.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Carquest Premium – Stabilizer Bar Link Kit (Part No.500-316781)

Stabilizer Bar Link Kit

from

$18.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Upgrade your 1962 Ford Falcon with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1962 Ford Falcon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Steering and Chassis Parts are key to keeping your Falcon functioning at its best. At Advance Auto Parts, we offer a wide selection of 59 Steering and Chassis Parts for the 1962 Ford Falcon, designed to meet your needs without breaking the bank. From Sway Bar replacements to Gear Boxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1962 Ford Falcon at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $4.79 to $315.99, with an average price of $49.75. Our 59 Steering and Chassis Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1962 Ford Falcon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1962 Ford Falcon, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Cardone, Driveworks, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Cardone and Driveworks also bring quality to the table, with Steering and Chassis Parts available starting at $4.99, and at an average 4 stars rating. With 1,118 customer reviews and counting, our 1962 Ford Falcon Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1962 Ford Falcon is always ready to roll. We’re committed to providing you with everything you need to keep your Falcon in top shape, all in one place. Start shopping confidently below for your 1962 Ford Falcon!

Best-Selling Sway Bars for 1962 Ford Falcons

Enhance the driving experience in your Ford with 21 quality Sway Bar components, starting at $10.29.

MOOG – Stabilizer Bar Link Kit (Part No.K700528)

Stabilizer Bar Link Kit

from

$24.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Stabilizer Bar Bushing Kit (Part No.K5227)

Stabilizer Bar Bushing Kit

from

$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
  • EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
  • HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • Inner sleeve is phosphate coated for corrosion protection
See More

Driveworks – Sway Bar Link Kits (Part No.DW-K8989)

Sway Bar Link Kits

from

$18.99
Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:
  • Meets or exceeds OE performance specifications
  • Premium Polychloroprene boot with grease relief valve keeps contaminants out
  • Performance tested to ensure durability
See More

Carquest Premium – Stabilizer Bar Link Kit (Part No.500-316781)

Stabilizer Bar Link Kit

from

$18.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Hex formed studs and/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Hardware included for easier installation (where applicable)
See More

Rare Parts – Sway Bar Link Kit (Part No.RP15642)

Sway Bar Link Kit

from

$17.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Whiteline – Sway Bar 18Mm Heavy Duty (Part No.BFR1-KU4)

Sway Bar 18Mm Heavy Duty

from

$276.99
Engineered to ‘Activate More Grip’, sway bars are principally designed to reduce body roll or sway. By reducing body roll, lateral loads are spread more evenly across the tyres thereby increasing cornering grip and improving outright performance. This Whiteline 18mm fixed position sway bar = more grip = better handling = outright performance – it’s the best dollar for dollar handling improvement you can make to your vehicle. In fact, benefits extend to improvements in handling, safety and tyre wear without affecting ride quality or comfort.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • DIY Lateral locks prevent shifting or sideways movement of the sway bar under lateral (cornering) loads.
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
See More

Whiteline – Sway Bar Mount Saddle (Part No.KBR10)

Sway Bar Mount Saddle

from

$49.99
Universal sway bar mount saddle. Check out the universal sway bar D mount range offering 14-30mm diameter bushings.

Product Features:
  • Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
See More

Whiteline – Sway Bar Link (Part No.W21807S)

Sway Bar Link

from

$47.99
Whiteline sway bar products improve sway bar effectiveness for more balanced and predictable cornering. Perfect for restorers.

Product Features:
  • By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
  • Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
See More

Rare Parts – Stab Bar Link Kit (Part No.RP22190)

Stab Bar Link Kit

from

$25.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Whiteline – Sway Bar Mount Saddle (Part No.W21301)

Sway Bar Mount Saddle

from

$23.99
Universal sway bar mount saddle. Check out the universal sway bar D mount range offering 14-30mm diameter bushings.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Rare Parts – Sway Bar Link Kit (Part No.RP17014)

Sway Bar Link Kit

from

$23.29
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Complete with bolt ,washers, and nut
  • Improves body roll
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21058G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 24mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21047G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 22mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21053G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 19mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21086G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 18mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21212G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 25mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W22789G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 28mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21063G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 20mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21105G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 21mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Mount Bushing (Part No.W21259G)

Sway Bar Mount Bushing

from

$21.99
Designed to fit a 16mm sway bar. Whiteline’s sway bar mount bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Whiteline bushings are made from the latest highest quality synthetic elastomer and designed to synchronize your suspension system for optimal safety, handling, performance, ride quality, longevity and reduced maintenance. They are the most positive link between your vehicles body, springs, struts, arms, bars and shocks.

Product Features:
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
  • Install guide included providing detailed instructions on how to install your new Whiteline purchase.
See More

Whiteline – Sway Bar Link Washers (Part No.KW2)

Sway Bar Link Washers

from

$11.99
Has the thin galvanised metal washers on your OEM links flogged out? Whiteline have a specially designed, shaped and case hardened washers to suit the rigours wear and tear loads on sway bar link washers.

Product Features:
  • Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
See More

Most Popular 1962 Ford Falcon Gear Boxes

Customize your Ford with 1 Gear Boxes products like Steering Gear Box, all priced under $315.99.

Lares – Remanufactured Manual Steering Gear Box (Part No.8677)

Remanufactured Manual Steering Gear Box

from

$315.99
Manual Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is filled with a high quality grease with a special polymer to reduce oil separation. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More

Top Picks for 1962 Ford Falcon Power Steering Parts

Upgrade Ford Falcons with top-quality Power Steering Parts parts, including 13 OEM and aftermarket selections for your 1962 model.

Cardone – Power Steering Filter (Part No.20-0058F)

Power Steering Filter

from

$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Imperial – Mounting Kit System (Part No.226201)

Mounting Kit System

from

$11.49
Product Features:
  • Imperial mounting kit system
  • For installation of transmission coolers and electric fans
  • Provides quick, effective installation of Imperial products
  • Contains nylon mounting rods, foam pads and locking buttons
  • Atermarket electric fan and cooler mounting rods
  • Made with the highest quality materials
  • Quality machined for durability
  • Removable buttons for relocation
See More

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Transmission Oil Cooler Hose

from

$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:
  • Transmission oil cooler hose
  • 11/32″ x 4-1/2′
  • Designed for transmission fluid applications
  • Made for tight-radius applications found in transmission cooler installations
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
  • Compatible with 11/32 in. OEM cooler systems
  • Tube made of black chemigum (nitrile)
  • Reinforced with 2-spiral synthetic
  • Covered in black Hypalon
See More

Cardone – New Power Steering Filter (Part No.20-0038F)

New Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element.
  • Patented built-in bypass that filters up to 190 micron particles.
  • Designed to extend the life of the steering system.
  • Sure-grip barb connections are included to ensure proper hose fitment.
See More

Imperial – Power Steering Oil Cooler (Part No.241009)

Power Steering Oil Cooler

from

$28.49
Product Features:
  • Power steering oil cooler
  • 3/4″ x 2-1/2″ x 9″
  • For vehicles with 3/8″ I.D. power steering return hose
  • Removes destructive heat and prolongs power steering system life
  • Compatible with OEM cooler systems
  • Ultrasonically soldered for reliability
  • 100% pressure testing to 150 PSI for quality assurance
  • High efficiency turbulators
See More

Imperial – Quick Connect Coupler (Part No.240250)

Quick Connect Coupler

from

$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:
  • Quick Connect coupler
  • Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
  • Simplifies transmission cooler installation
  • Allows for auxiliary transmission cooler installation without cutting OE lines
See More

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Transmission Oil Cooler Reinstallation Kit

from

$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:
  • Transmission cooler reinstallation kit
  • Contains part numbers 248001, 226201, 240250 and 4 hose clamps
  • Provides all hardware for reinstallation of Imperial transmission coolers
  • Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Power Steering Oil Cooler Medium Duty

from

$36.49
3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:
  • Medium-duty power steering oil cooler
  • Size: 3/4″ x 2-1/2″ x 12″
  • For vehicle with 3/8″ ID power steering return hose
  • Removes destructive heat and helps prolong power steering system life
See More

Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)

Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles

from

$31.49
Product Features:
  • Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
  • Small size provides an easy fit, even in cramped systems
  • Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
  • Filter can be easily serviced, extending its functional lifespan considerably
See More

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Taper Bearing Cup

from

$4.99
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Driveworks – Tapered Roller Bearing (Part No.S-LM-29749)

Tapered Roller Bearing

from

$8.79
Product Features:
  • Brand may vary by location
See More

In-Demand Tie Rods for 1962 Ford Falcons

Select from 8 premium Tie Rods parts for your 1962 Ford Falcon, with prices ranging from $5.99 to $144.99.

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Tie Rod Dust Boot

from

$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Rare Parts – Tie Rod Sleeve (Part No.RP25675)

Tie Rod Sleeve

from

$144.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Complete with clamps
  • Used to set Toe in or out
  • replaces rusted or corroded sleeves
  • Used to connect inner and outer tie rod ends
See More

Rare Parts – Tie Rod End (Part No.RP25401)

Tie Rod End

from

$101.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

Rare Parts – Tie Rod End (Part No.RP25402)

Tie Rod End

from

$77.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Restores OE alignment
  • Reduces tire wear
  • Improves steering response
See More

MOOG – Tie Rod End (Part No.ES317R)

Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

MOOG – Tie Rod End (Part No.ES317L)

Tie Rod End

from

$65.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Most Sold 1962 Ford Falcon Ball Joints

Explore our best-selling Ford parts for the 1962 Falcon among 5 OEM and aftermarket options starting from $76.99.

Dorman – Suspension Control Arm (Part No.520-395)

Suspension Control Arm

from

$112.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Rare Parts – Ball Joint (Part No.RP10105)

Ball Joint

from

$139.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.

Product Features:
  • Full Ball Stud Pitman Arm end
  • Greaseable
  • Self aligning no bind design
  • Low friction
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.RK643575)

Suspension Control Arm and Ball Joint Assembly

from

$93.99
Product Features:
  • GREASEABLE SOCKETá–Makes maintenance easy and reduces corrosion and wear by allowing new lubricant to flush contaminantsá
  • KEEPS DIRT AND WATER OUT –Pre-installed dust bootáseal provides an effective barrier againstáwear-causing contaminantsá
  • ADDED CORROSION PROTECTIONá–Specially-engineered coatings are applied to metal surfaces toáinhibit premature deterioration caused by rain, snow, salt and road grimeá
  • PREMIUM BUSHINGS –Pre-installed with optimized stiffness to inhibit noise for a comfortable rideá
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • QUALITY ASSURANCEá–áLaser-etched ID provides visible assurance of genuine MOOG qualityá
See More

MOOG – Suspension Control Arm and Ball Joint Assembly (Part No.CK8035)

Suspension Control Arm and Ball Joint Assembly

from

$86.99
MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength durability and confidence is required.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
See More

Rare Parts – Control Arm with Ball Joint (Part No.RP10271)

Control Arm with Ball Joint

from

$76.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • With ball joint
  • Reduces vibration
  • With bushing
See More

Top-Rated Steering and Chassis Parts Brands For Your 1962 Ford Falcon

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1962 Ford Falcons. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Cardone, and Driveworks, and more. Steering and Chassis Parts from these brands that fit a 1962 Falcon start at just $4.99 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 1962 Ford Falcon Steering and Chassis Parts

When it comes to maintaining or upgrading your 1962 Ford Falcon, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 1962 Ford Falcon. With over 6 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.54. Plus, with over 211 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Mounting Kit System
from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

Transmission Oil Cooler Hose
from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Power Steering Oil Cooler Medium Duty
from
$36.49
This product is not rated

Power Steering Oil Cooler Medium Duty

“”

Popular Cardone 1962 Ford Falcon Steering and Chassis Parts

Cardone auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1962 Ford Falcon owner should feel confident when installing genuine Cardone parts in their vehicle. To ensure the best fit and performance for your 1962 Falcon, Advance Auto Parts carries a full inventory of 4 Cardone Steering and Chassis Parts. Plus you will be keeping your Ford in peak condition while saving money because prices on these Cardone Steering and Chassis Parts range from $31.99 to $48.49, plus, with more than 62 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

Power Steering Filter
from
$48.49

(2)

Power Steering Filter

“installed on return line to power steering pump no problems with leaks”

Power Steering Filter
from
$31.99
This product is not rated

Power Steering Filter

“”

Power Steering Filter
from
$46.99

(1)

Power Steering Filter

“Good filter, works great”

FAQs for 1962 Ford Falcon Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1962 Ford Falcons?

Out of 59 Steering and Chassis Parts that fit 1962 Ford Falcons, the following parts are the top sellers:

What’s the price range for 1962 Ford Falcon Steering and Chassis Parts?

Steering and Chassis Part prices for the 1962 Ford Falcon start at $4.79 and go up to $315.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1962 Ford Falcon?

The average price for Steering and Chassis Parts for the 1962 Ford Falcon is $49.75. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Ford Falcon model years?

Yes, we currently carry Steering and Chassis Parts for 10 model years of Ford Falcons between 1960 and 1970. Steering and Chassis Parts are bought most frequently for the following model years: 1970, 1969, 1968, 1967, 1966, 1965, 1964, 1963, and 1961.

What are the cheapest Steering and Chassis Parts for my 1962 Ford Falcon?

The cheapest 1962 Ford Falcon Steering and Chassis Parts we carry in stock are:

What are the top-rated Steering and Chassis Parts that fit the 1962 Ford Falcon?

Out of 1,118 reviews by customers, our 1962 Ford Falcon Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1962 Ford Falcon and their top-rated products:

What types of Steering and Chassis Parts do you sell for my 1962 Ford Falcon?

Can I get help with 1962 Ford Falcon Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Steering and Chassis Parts and more.

What is your return policy for Ford Falcon Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Ford Falcon Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.