1962 Ford Falcon Drivetrains

Below you will find various in-demand Ford Drivetrains, components and accessories for your 1962 Falcon. Advance Auto Parts has popular Falcon parts like Transfer Cases, Spindles, Drive Shafts and Axles and more. You’ll also find aftermarket and OEM Drivetrains for other Falcon model years including 1961, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970 and more. Select a category of 1962 Ford Falcon Drivetrains below and start saving instantly.

Popular 1962 Ford Falcon Drivetrains Categories

Differential Oil

U-Joints

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Bearings

Bearing Pullers

Drive Shaft Bearings

Axle Shaft Seals

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Axle Shaft Bearings

Differential Carriers

Differential Bearing Kits

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential Cases

Differential End Yokes

Differential Pinion Supports

Spindle Lock Nuts

Rear Differential Pinion Bearings

Differential Spools

Differential Lock Springs

Differential Carrier Bearing Adjusters

Transfer Case Output Shaft Bearings

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Lock Nut Thrust Washers

Input Shaft Seals

Spindle Retainers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Cross Pins

Differential Housing O-Rings

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Axle Shaft Studs

Differential Drive Pinion Gear Bearing Retainer Bolts

Differential Drive Pinion Oil Deflectors

Spindle Washers

Axle Shaft Bearing Retainers

Limited Slip Differential Assemblies

Differential Lock Washers

Differential Clutch Pack Clips

Differential Bearing Adjuster Nut Lock Bolts

Axle Housing Fill Plugs

Differential Carrier Bearing Races

Drive Shaft Pinion Yoke Washers

Essential Drivetrains for 1962 Ford Falcons

from

$883.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings

from

$94.99

3.062″ side adjuster, Only Fits Yukon Ford 9″ Drop Out, new design ONLY.

Product Features:

Side adjuster
Fits Ford 9″
3.062″ designs only

from

$4.99

Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:

Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″

from

$254.99

Yukon Bearing installation kits are perfect for shops & builders who have shims on the shelf and are looking to save cost over a Master Overhaul kit. This kit uses carrier bearings & races with an I.D. of 1.780″ and an O.D. of 2.891″. This kit uses Timken bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:

Fits Ford 9″ with LM102910 carrier races and Daytona pinion support
Included are carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve, pilot bearing, marking compound and brush.

from

$51.99

Flat side gear without hub for 8″ and 9″ Ford with 28 splines.

Product Features:

Side gear without hub
Fits Ford 8″ and 9″ Trac Loc positraction with 28 spline axles

from

$22.99

Product Features:

Axle bearing retainer for Ford 9″
Fits small bearing applications
3/8″ bolt holes
3 5/16″ x 2″ bolt pattern

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$374.99

8″ & 9″ Ford 5-Tab clutches (early Equalock).

Product Features:

Clutch kit
Fit Ford 9″ Equa Loc positraction
5 outer tabs

from

$273.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits Ford 9″ with LM603011 carrier races and Daytona pinion support
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush and gasket.

from

$37.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$941.99

The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. The Yukon Grizzly locker is a mechanical locking differential. It features a forged case and 8620 internals for maximum strength. It’s patented design reduces common locker failures. All units assembled in the USA! All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000!

Product Features:

Fits Ford 8″ with 31 spline axles
Patented internal design reduces common locker failures
8620 internals for added strength
Assembled in the USA

from

$21.49

Product Features:

PINION SHIMS 8″ FORD

from

$26.99

9″ Ford Spartan locker cross pin, short.

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Ford 9″
Works with Spartan Locker or standard open spider gears
Short shaft for four pinion designs

from

$269.99

Plain Silver aluminum pinion Supprt for 9″ Ford Daytona, HD 6061.

Product Features:

Fits Ford 9″ with 28 spline pinion
Larger inner pinion bearing reduces gear deflection under high load
Races installed
6061 aluminum

from

$219.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits LM104911 race
All steel construction

from

$39.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$14.49

This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$549.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Ford 9″
9.00″ ring gear diameter
28 spline pinion
10 ring gear bolts
6.20 ratio

from

$51.99

One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:

Carrier race
Fits Ford 9″
Conversion race to install small bearing carrier into 3.250″ dropout

from

$11.99

9″ Ford gasket.

Product Features:

Dropout gasket
Fits Ford 9″

from

$21.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$8.99

Product Features:

Trac Loc spring for Ford 8″ and 9″

from

$4.99

STAR washers, 3.250″ Yukon Ford 9″ Drop Out new design ONLY.

Product Features:

Star washer
Fits Ford 9″
3.250″ designs only

from

$30.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$3.99

Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:

Side adjuster lock bolt

from

$209.99

Yukon forged yoke for Ford 9″ with 35 spline pinion and a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 9″
35 spline
1350 u-joint size
3.625″ snap ring span
1.188″ cap diameter
Outside snap ring design
U-bolt style

from

$551.99

For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.

Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.

Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.

Powertrax® = Extreme Traction Systems!

from

$225.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Ford 9″ with Daytona pinion support
Included are pinion bearings and races, pinion seal, crush sleeve eliminator , complete pinion shim kit, and marking compound with brush.

Upgrade your 1962 Ford Falcon with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1962 Ford Falcon, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your Falcon functioning at its best. At Advance Auto Parts, we offer a wide selection of 243 Drivetrains for the 1962 Ford Falcon, designed to meet your needs without breaking the bank. From Transfer Case replacements to Spindles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1962 Ford Falcon at great prices. Our Drivetrains inventory for this model ranges from just $2.99 to $1,211.99, with an average price of $245.91. Our 243 Drivetrains in stock come from 10 trusted brands, so you’re sure to find the right part for your 1962 Ford Falcon without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1962 Ford Falcon, we stock popular OEM and aftermarket Drivetrains from top names like Powertrax, National, Dorman, and more. Powertrax Drivetrains start at just $551.99 and boast an impressive 4.7 stars average rating from customers. National and Dorman also bring quality to the table, with Drivetrains available starting at $3.49, and at an average 4.3 stars rating. With 42 customer reviews and counting, our 1962 Ford Falcon Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1962 Ford Falcon is always ready to roll. We’re committed to providing you with everything you need to keep your Falcon in top shape, all in one place. Start shopping confidently below for your 1962 Ford Falcon!

Best-Selling Transfer Cases for 1962 Ford Falcons

Enhance the driving experience in your Ford with 5 quality Transfer Case components, starting at $7.79.

show more show less

from

$36.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$30.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.79

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.29

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$7.99

Design type: spring loaded; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

Most Popular 1962 Ford Falcon Spindles

Customize your Ford with 6 Spindles products like Spindle Lock Nuts, Spindle Retainers, and Spindle Lock Nut Thrust Washers, all priced under $14.49.

show more show less

from

$3.49

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.49

This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$3.99

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$5.99

Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.79

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$14.49

Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top Picks for 1962 Ford Falcon Drive Shafts and Axles

Upgrade Ford Falcons with top-quality Drive Shafts and Axles parts, including 10 OEM and aftermarket selections for your 1962 model.

show more show less

from

$39.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Fill plug
Fits Ford 9″

from

$67.99

Product Features:

Axle bearing retainer for Ford 9″
Fits large bearing applications
1/2″ bolt holes
3 1/2″ x 2 3/8″ bolt pattern

from

$21.99

Product Features:

Inner front axle seal
Fits Dana Spicer 30 with vacuum disconnect eliminator kit with 30 spline upgrade

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$92.99

Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:

Axle bearing
Fits Ford 9″
Conversion bearing to install small bearing axle into large bearing housing
3.150″ O.D.
1.377″ I.D.

from

$71.99

Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.

Product Features:

Adapter washer
Fits Ford 9″
Adapts 28 spline pinion into 35 spline pinion support

from

$22.99

Product Features:

Axle bearing retainer for Ford 9″
Fits large and small bearing applications
3/8″ bolt holes
3 9/16″ x 2″ bolt pattern

from

$22.99

Product Features:

Axle bearing retainer for Ford 9″
Fits small bearing applications
3/8″ bolt holes
3 5/16″ x 2″ bolt pattern

from

$5.99

Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:

Axle stud for AMC Model 20 and Model 35
1/2″ x 20 thread
0.620″ knurl diameter
1.625″ long

In-Demand Universal Joints for 1962 Ford Falcons

Select from 9 premium Universal Joints parts for your 1962 Ford Falcon, with prices ranging from $29.99 to $111.99.

show more show less

from

$44.99

Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.

from

$59.99

Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.

from

$29.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$63.99

Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

from

$57.99

1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.

from

$111.99

Yukon 1350 to Mechanics 3R adaptor U/joint.

from

$74.99

1.250″ pinion adaptor sleeve (stock pinion into large support).

Product Features:

Adapter sleeve
Fits Ford 9″
Adapts 28 spline pinion into 35 spline pinion support

Most Sold 1962 Ford Falcon Differentials

Explore our best-selling Ford parts for the 1962 Falcon among 213 OEM and aftermarket options starting from $2.99.

show more show less

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$551.99

from

$5.99

Product Features:

Copper washer
Fits Ford 8″ and 9″

from

$37.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$9.99

Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:

Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
0.480″ tall

from

$16.49

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$8.99

Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:

Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear

from

$5.99

Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.

Product Features:

Ring gear bolt for Ford 8″ and 9″
For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
7/16″ head
.925″ long

from

$5.99

Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.

Product Features:

Ring gear bolt for Ford 8″ and 9″
For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
1.0″ long

from

$4.99

Ford 8″ & 9″ TracLoc ring gear bolt, 1-1/4″ long.

Product Features:

Ring gear bolt for Ford 8″ and 9″
For use with Trac Loc limited slip
1.25″ long

from

$10.79

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$11.99

9″ Ford gasket.

Product Features:

Dropout gasket
Fits Ford 9″

from

$148.99

Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive

from

$21.99

8.75″ Chrysler & 9″ Ford preload shim kit.

Product Features:

Preload shim kit for Ford 9″ and Chrysler 8.75″ with ’41’ and ’42’ case housing

from

$5.99

Product Features:

Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
0.030″ thick

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$38.99

8.6″ GM 99-08 PINION Bearing & SEAL KIT .

Product Features:

Pilot bearing
Fits Ford 9″
0.656″ thick

from

$6.99

Pinion support bolt for 8″ and 9″ Ford.

Product Features:

Pinion support bolt for Ford 8″ and 9″
3/8″ x 24 thread
1.0″ long

from

$137.99

Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:

Includes four quarts of Redline Shockproof oil

from

$18.99

1310 and 1330 U/bolt kit (2 U-bolts and 4 nuts) for 9″ Ford.

Product Features:

u-joint u-bolt kit
Fits Ford 9″
1310 and 1330 u-joint size
Includes two u-bolts and four nuts

from

$14.99

O-ring for 9″ Ford.Yukon Mighty seal.

Product Features:

Pinion support o-ring
Fits Ford 9″

from

$47.99

Side gear with hub for 9″ Ford with 31 splines.

Product Features:

Side gear with hub
Fits Ford 8″ and 9″ standard open differential and Trac Loc positraction with 31 spline axles

Top-Rated Drivetrains Brands For Your 1962 Ford Falcon

Shop for the best-rated brands offering Drivetrains and other products for your 1962 Ford Falcons. Below you’ll find some of our best rated Drivetrains from Powertrax, National, and Dorman, and more. Drivetrains from these brands that fit a 1962 Falcon start at just $3.49 and are rated as high as 4.7 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Powertrax 1962 Ford Falcon Drivetrains

When it comes to maintaining or upgrading your 1962 Ford Falcon, using quality Drivetrains is essential to ensure durability and a perfect fit. Powertrax ticks all of those boxes. We offer a wide selection of Powertrax Drivetrains, specifically designed for the 1962 Ford Falcon. With over 1 Powertrax brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $551.99. Plus, with over 1 customer reviews and an average rating of 4.7 stars, you can trust that our Powertrax Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $551.99

(1)

No-Slip Traction System

“Installed, no issues, works great.”

Popular National 1962 Ford Falcon Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 1962 Ford Falcon owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1962 Falcon, Advance Auto Parts carries a full inventory of 3 National Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these National Drivetrains range from $12.99 to $37.99, plus, with more than 4 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $37.99

(1)

Shaft Repair Sleeve

“Very delicate piece, but came shipped quite safely and not damaged. High quality.”

from $12.99

(2)

Multi-Purpose Seal

“Worked great on this 1966 Mustang w/ 8″ rear end.”

from $36.49

(1)

Shaft Repair Sleeve

“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”

FAQs for 1962 Ford Falcon Drivetrains

Which Drivetrains are best-sellers for 1962 Ford Falcons?

Out of 243 Drivetrains that fit 1962 Ford Falcons, the following parts are the top sellers:

Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (22972449) – $3.99
Shaft Repair Sleeve (3271757) – $36.49
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Sold by each) (22149135) – $5.99

What’s the price range for 1962 Ford Falcon Drivetrains?

Drivetrain prices for the 1962 Ford Falcon start at $2.99 and go up to $1,211.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1962 Ford Falcon?

The average price for Drivetrains for the 1962 Ford Falcon is $245.91. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Ford Falcon model years?

Yes, we currently carry Drivetrains for 9 model years of Ford Falcons between 1960 and 1970. Drivetrains are bought most frequently for the following model years: 1970, 1969, 1968, 1967, 1966, 1965, 1964, 1963, and 1961.

What are the cheapest Drivetrains for my 1962 Ford Falcon?

The cheapest 1962 Ford Falcon Drivetrains we carry in stock are:

Crush Sleeve (10592883) – $2.99
Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49
Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (22972449) – $3.99
Trac Loc Ring Gear Bolt Washer For 8" And 9" Ford (11643118) – $3.99
Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (11642694) – $3.99

What are the top-rated Drivetrains that fit the 1962 Ford Falcon?

Out of 42 reviews by customers, our 1962 Ford Falcon Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1962 Ford Falcon and their top-rated products:

Differentials
- Shaft Repair Sleeve (3271773) – $37.99
- Multi-Purpose Seal (18445017) – $12.99
- No-Slip Traction System (10461097) – $551.99
Spindles
- Shaft Repair Sleeve (3271773) – $37.99
- Multi-Purpose Seal (18445017) – $12.99
- No-Slip Traction System (10461097) – $551.99

What types of Drivetrains do you sell for my 1962 Ford Falcon?

As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 1962 Ford Falcon:

Can I get help with 1962 Ford Falcon Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.

What is your return policy for Ford Falcon Drivetrains?

Advance Auto Parts keeps returns simple. For new Ford Falcon Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1962 Ford Falcon Drivetrains

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

Yukon Gear – 3.062" Side Adjuster For Ford 9" (Part No.32139)

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Yukon Gear – Bearing Install Kit For Ford Daytona 9" Differential, LM102910 Bearings (Part No.11047)

Yukon Gear – Flat Side Gear Without Hub For 8" And 9" Ford With 28 Splines (Part No.16164)

Yukon Gear – Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes (Part No.33468)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – 8" & 9" Ford 5-Tab Clutches (Part No.16028)

USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support (Part No.37038)

National – Shaft Repair Sleeve (Part No.99199)

Yukon Gear – Grizzly Locker For Ford 8" With 31 Spline Axles (Part No.28007)

Motive Gear – Differential Pinion Shim Kit (Part No.2102)

USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Short (Part No.17022)

Yukon Gear – Silver Aluminum Pinion Supprt For 9" Ford Daytona (Part No.32037)

Yukon Gear – Bearing Race Driver (Part No.56019)

National – Multi-Purpose Bearing (Part No.307-L)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Sold by each) (Part No.618-005)

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 9" In A 6.20 Ratio (Part No.24394)

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

Yukon Gear – 9" Ford Gasket (Part No.23012)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT5)

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Yukon Gear – Star Washers, 3.250" Ford 9" Drop Out New Design Only (Part No.32144)

MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.230)

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Yukon Gear – Forged Yoke For Ford 9" With 35 Spline Pinion And A 1350 U/Joint Size (Part No.41065)

Powertrax – No-Slip Traction System (Part No.9206902800)

Yukon Gear – Pinion Install Kit For Ford Daytona 9" Differential (Part No.13049)

National – Shaft Repair Sleeve (Part No.99187)

National – Multi-Purpose Bearing (Part No.206-L)

National – Manual Transmission Input Shaft Seal (Part No.482208)

FAG US – Cone (Part No.KL44649)

National – Multi-Purpose Seal (Part No.480210)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Sold by each) (Part No.615-073)

Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Sold by each) (Part No.618-005)

National – Multi-Purpose Bearing (Part No.307-L)

Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)

Yukon Gear – Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes (Part No.33467)

Yukon Gear – Mighty Seal (Part No.30113)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)

Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)

Yukon Gear – Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes (Part No.33468)

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)

Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.514G)

Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)

Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)

Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)

Yukon Gear – 1350 To Mechanics 3R Adaptor U/Joint (Part No.42001)

Yukon Gear – 1.250" Pinion Adaptor Sleeve (Stock Pinion Into Large Support) (Part No.32239)

National – Multi-Purpose Seal (Part No.8181NA)

National – Shaft Repair Sleeve (Part No.99199)

Powertrax – No-Slip Traction System (Part No.9206902800)

Yukon Gear – Copper Washer For Ford 9" & 8" Dropout Housing (Part No.32339)

National – Shaft Repair Sleeve (Part No.99181)

Yukon Gear – Crush Sleeve (Part No.33085)

National – Bearing Race (Part No.LM29710)

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)

Yukon Gear – Ford 8" & 9" Tracloc Ring Gear Bolt (Part No.33044)

National – Bearing Race (Part No.HM89410)

Yukon Gear – Pinion Nut (Part No.33154)

Yukon Gear – 9" Ford Gasket (Part No.23012)

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Yukon Gear – Preload Shim Kit For Chrysler 8.75" & Ford 9" (Part No.55030)

Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Pilot Bearing For Ford 9" (Part No.18042)

Yukon Gear – Pinion Support Bolt For 8" And 9" Ford (Part No.33242)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)