1961 Jeep CJ5 Drivetrains
More 1961 Jeep CJ5 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1961 Jeep CJ5, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1961 Jeep CJ5 Drivetrains
Neapco – Universal Joint (Part No.2-4800)
Crown Auto Jeep Replacmnt – OE Replacement, Dana 44 (Part No.83503077)
from
$15.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Rugged Ridge – Locking Hub (Part No.15001.26)
from
$276.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure. The only way to repair it is to r
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$219.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
USA Standard Gear – Steel Spool For Dana 44 With 30 Spline Axles, 3.92 & Up (Part No.59015)
from
$289.99
Product Features:
See More
- Fits Chrysler Dana Spicer 44 with 30 spline axles
- 3.92 and up ratio only
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)
from
$10.99
Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.
Product Features:
See More
Product Features:
- Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
- 7/8″ x 20 thread
- 1 1/8″ socket
Yukon Gear – High Performance Ring & Pinion Gear Set For Model 20 In A 4.56 Ratio (Part No.24176)
from
$389.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits AMC Model 20
- 8.875″ ring gear diameter
- 28 spline pinion
- 8 ring gear bolts
- 4.56 ratio
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-114)
from
$154.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
- Related repair – smart to have on hand when installing a differential ring and pinion
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head, 1 Pack (Part No.090-018)
from
$11.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Omix – Drive Shaft (Part No.16950.06)
from
$747.99
Has your Jeep’s front driveshaft broken or the U-joints wore out? Can’t go off road until it’s fixed? Omix-ADA offers a wide variety of stock replacement front driveshafts. Get back on the trail to see what you’re missing.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)
from
$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 44 with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Pump Up Kit, Zip Locker (Part No.34031)
from
$174.99
Pump up kit, Zip Locker.
Product Features:
See More
Product Features:
- Tire pump up kit
- Includes hose, fittings, couplers and teflon tape
National – Multi Purpose Seal (Part No.473468)
from
$19.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.5778V)
from
$69.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -100°F to 450°F; -73°C to 232°C
- Resistant to hydrocarbon/oxygenate blends and provides superior performance
- Provides excellent dry running capabilities, low coefficient of friction and excellent resistance to chemicals
- Delivers quality and reliable performance for every type of repair
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Driveworks – Taper Bearing Cone (Part No.S-M-86649)
from
$8.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Crown Auto Jeep Replacmnt – 1 Piece, Steel (Part No.83503388)
from
$63.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Easy Installation
Yukon Gear – O-Ring For Toyota & Dana 44 Zip Locker Seal Housing (Part No.34004)
from
$11.29
Product Features:
See More
- O-ring for seal housing
- Fits Dana Spicer 44 and Toyota 8″ and V6
Omix – Transfer Case Output Shaft Bearing (Part No.18672.02)
from
$51.99
Is your Dana 20 transfer case not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the Dana 20 internal parts you need to fix your Jeep’s transfer case. Fix it and enjoy your ride.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Limited 5 Year Warranty
Crown Auto Jeep Replacmnt – Standard Hex Nut, With 2 Spindle Nuts/ Washers (Part No.A867K)
from
$12.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)
National – Bearings (Part No.31520)
from
$12.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Popular 1961 Jeep CJ5 Drivetrains Categories
1961 Jeep CJ5 Drivetrains
You count on your 1961 Jeep CJ5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 238 Drivetrains ranging in price from $1.99 to $1,302.99, you’re sure to find everything you need for your 1961 Jeep CJ5.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, Moog, and Driveworks. 1961 Jeep CJ5 Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,338 extensive product reviews on 1961 Jeep CJ5 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 2.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1961 Jeep CJ5 below to get started!
Top-Rated Drivetrains Brands For Your 1961 Jeep CJ5
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1961 Jeep CJ5 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1961 Jeep CJ5 back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1961 Jeep CJ5, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1961 Jeep CJ5 Drivetrains
What are the most purchased Drivetrains for the 1961 Jeep CJ5?
Out of 238 Drivetrains for the 1961 Jeep CJ5, the most popular in our inventory are:
What are the top-rated 1961 Jeep CJ5 Drivetrains?
Top-rated Drivetrains for your 1961 Jeep CJ5 based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
from
$25.99
(6)
Non-Greaseable Super Strength Universal Joint
“Nice machining and construction on these joints. Fit my 78 CJ7 front shafts without trouble. The main issue folks are having is being shadetree mech”
from
$36.99
(4)
Greaseable Super Strength Universal Joint
“Replaced all u joints frt axles frt drive and main shaft, time will tell.”
