1961 Jeep CJ5 Differentials

Essential 1961 Jeep CJ5 Differentials

Yukon Gear – Replacement Pinion Gear Thrust Washer For Dana 25 & Dana 27, Standard Open (Part No.33282)

Replacement Pinion Gear Thrust Washer For Dana 25 & Dana 27, Standard Open

from

$7.99
Product Features:
  • Pinion gear thrust washer
  • Fits Dana Spicer 25 and 27
See More

Motive Gear – Differential Gear Install Kit (Part No.D44IK)

Differential Gear Install Kit

from

$61.99


Product Features:
  • MINI INSTALL KIT DANA 44
See More

Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)

Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline

from

$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.

Product Features:
  • Spider gear kit
  • Fits Dana Spicer 44 with Dura Grip positraction
  • Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Pro-King – Differential Ring Gear Bolt (Part No.742E935)

Differential Ring Gear Bolt

from

$1.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)

Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50

from

$4.99
Product Features:
  • Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
See More

Yukon Gear – Ppinion Nut 7/8-20 Thread, 1 1/8 Socket (Part No.33146)

Ppinion Nut 7/8-20 Thread, 1 1/8 Socket

from

$10.99
Replacement pinion nut for Model 20 & 35, Dana 30 JK, 44 JK front, Ford 10.25″, 10.5″ & some 9.75″. 7/8-20 thread, 1 1/8 socket.

Product Features:
  • Pinion nut for Jeep JK front, Jeep Liberty front, Ford 9.75″, 10.25″, 10.5″ and AMC Model 20 and Model 35
  • 7/8″ x 20 thread
  • 1 1/8″ socket
See More

Yukon Gear – Replacement Side Gear Thrust Washer For Dana 44, 19 Spline (Part No.33280)

Replacement Side Gear Thrust Washer For Dana 44, 19 Spline

from

$13.99
Product Features:
  • Side gear thrust washer
  • Fits Dana Spicer 44 with 19 spline axles
See More

Yukon Gear – Minor Install Kit For Dana 44 Differential (Part No.12018)

Minor Install Kit For Dana 44 Differential

from

$144.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits Dana Spicer 44 with 19 spline axles
  • Included are a pinion seal, complete shim kit, marking compound and brush.
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

Taper Bearing Cup

from

$7.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Yukon Gear – Aluminum Girdle Replacement Cover For Dana 44 Ta HD (Part No.32110)

Aluminum Girdle Replacement Cover For Dana 44 Ta HD

from

$359.99
Aluminum Girdle replacement cover for Dana 44 TA HD.

Product Features:
  • Fits standard rotation Dana Spicer 44
  • Aluminum girdle cover
See More

Yukon Gear – Pinion Install Kit For Dana 25 Differential (Part No.13012)

Pinion Install Kit For Dana 25 Differential

from

$289.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 25
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50 (Part No.33011)

Replacement Outer Oil Slinger For Dana 25, 27, 30, 44 & 50

from

$5.99
Product Features:
  • Outer oil slinger for Dana Spicer 25, 27, 30, 44 and 50
See More

Yukon Gear – Replacement Trail Repair Kit For Dana 30 And 44 With 1310 Size U/Joint And Straps (Part No.32278)

Replacement Trail Repair Kit For Dana 30 And 44 With 1310 Size U/Joint And Straps

from

$223.99
Yukon replacement trail repair kit for Dana 30 and 44 with 1310 size U/joint and straps. This kit comes with a yoke, U/joint, pinion seal, U/bolt or strap kit, pinion nut, and pinion nut washer (if applicable).

Product Features:
  • Fits Dana Spicer 30 and 44
  • 1310 u-joint size
  • Kit includes yoke, U-joint, pinion seal, pinion nut and washer, straps, bolts and threadlocker
See More

Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)

Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25"

from

$17.99
Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo

Product Features:
  • Pinion depth shims for AMC Model 35 and Chrysler 7.25″
See More

Motive Gear – Differential Mini Spool (Part No.MSD44-30)

Differential Mini Spool

from

$101.99


Product Features:
  • MINI SPOOL – DANA 44, 30 SPL.
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1114)

Differential Pinion Shim Kit

from

$6.99


Product Features:
  • D30 PRE-LOAD SPACER (SHIM PACK)
See More

Yukon Gear – Model 20 Gasket (Part No.23025)

Model 20 Gasket

from

$15.99
Model 20 gasket.

Product Features:
  • Cover gasket
  • Fits AMC Model 20
See More

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Dana 30 / 44 Roll Pin Replacement

from

$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:
  • Roll pin for Dana Spicer 30 and Dana Spicer 44
  • 0.235″ diameter
See More

Yukon Gear – Set Up Bearing (Part No.56036)

Set Up Bearing

from

$172.99
Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.

Product Features:
  • Set up bearing kit
  • Fits Dana Spicer 30
  • Easily slips on and off carrier journals to allow for easier carrier shim adjustment
See More

Yukon Gear – Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20 (Part No.33332)

Standard Open Cross Pin Shaft (.750") For Ford 8", 8.8", 9" And Model 20

from

$16.99
Standard open cross pin shaft (.750″) for Ford 8″, 8.8″, 9″ and Model 20.

Product Features:
  • Cross pin shaft for Ford 8″, 8.8″ and 9″ and AMC Model 20
  • Fits standard open differentials only
  • 0.750″ diameter
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)

Dura Grip For Dana 44, 30 Spline, 3.92 & Up

from

$809.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits Dana Spicer 44 with 30 spline axles
  • 3.92 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)

Replacement Cover Gasket For Dana 30

from

$12.99
Product Features:
  • Cover gasket
  • Fits Dana Spicer 30
See More

Yukon Gear – Zip Locker Soleniod Valve (Part No.34014)

Zip Locker Soleniod Valve

from

$99.99
Zip Locker soleniod valve.

Product Features:
  • Solenoid valve
See More

Yukon Gear – Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75" (Part No.33536)

Powr Lok Button Kit For Dana 30, Dana 44 & Chrysler 8.75"

from

$67.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t

Product Features:
  • Powr Lok button kit
  • Fits Dana Spicer 30, 44 and Chrysler 8.75″
See More

USA Standard Gear – Ring & Pinion Gear Set For Model 20 In A 4.56 Ratio (Part No.36231)

Ring & Pinion Gear Set For Model 20 In A 4.56 Ratio

from

$308.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits AMC Model 20
  • 8.875″ ring gear diameter
  • 28 spline pinion
  • 8 ring gear bolts
  • 4.56 ratio
See More

1961 Jeep CJ5 Differentials

Maybe you’re in the middle of a full rebuild of that 1961 Jeep CJ5. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 168 different Differentials in our inventory ranging from $3.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1961 Jeep CJ5 running smoothly.

Differentials are only as good as their brand. We stock 11 different brands to make sure you have plenty of trusted parts to choose from for your 1961 Jeep CJ5. Yukon Gear, National, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1961 Jeep CJ5, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 18 reviews in this category, some of the top rated parts include Differential Ring and Pinion with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1961 Jeep CJ5 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1961 Jeep CJ5 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1961 Jeep CJ5 demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your CJ5 the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Differential Bearings and Differential Pinion Seals categories, plus more. For a 1961 Jeep CJ5, our most popular National Differentials include:
Taper Bearing Cup
from $10.99
(1)
Taper Bearing Cup
Differential Bearings
Multi Purpose Seal
from $23.29
(4)
Multi Purpose Seal
Differential Pinion Seals

FAQs for 1961 Jeep CJ5 Differentials

What are the most purchased Differentials for the 1961 Jeep CJ5?

Out of 168 Differentials for the 1961 Jeep CJ5, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 - 3/8" X 24
from $11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts
Oil Seal
from $10.49
(3)
Oil Seal
Differential Pinion Seals

What are the top-rated 1961 Jeep CJ5 Differentials?

Top-rated Differentials for your 1961 Jeep CJ5 based on customer reviews/ratings are:
Differential Ring and Pinion
from $193.99
(1)
Differential Ring and Pinion
“Hard to find items with a low price compared to others in the country, and shipping costs where the best.”