1961 Ford Falcon Drivetrains

Essential 1961 Ford Falcon Drivetrains

Yukon Gear – 9" Ford Gasket (Part No.23012)

9" Ford Gasket

from

$11.99
9″ Ford gasket.

Product Features:
  • Dropout gasket
  • Fits Ford 9″
See More

National – Multi Purpose Seal (Part No.8181NA)

Multi Purpose Seal

from

$11.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Mighty Seal (Part No.30214)

Mighty Seal

from

$26.99
Axle seal.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits Ford 8″
  • 2.264″ O.D.
  • 1.365″ I.D.
See More

Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)

One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout

from

$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.

Product Features:
  • Carrier race
  • Fits Ford 9″
  • Conversion race to install small bearing carrier into 3.250″ dropout
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Pinion Install Kit For Ford 8" Differential (Part No.13040)

Pinion Install Kit For Ford 8" Differential

from

$251.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 8″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Steel Spool For Ford 9" With 35 Spline Axles (Part No.32047)

Steel Spool For Ford 9" With 35 Spline Axles

from

$379.99
Yukon Performance 2-3/16″ deck steel spool for 9″ Ford with 35 spline axles. Spool uses 2″ journal bearings (30 degree). Does not fit Mark Williams. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″ with 35 spline axles
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)

Spindle Washer - I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In.

from

$3.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Nut (Part No.33154)

Pinion Nut

from

$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:
  • Pinion nut for Ford 7.5″, 8″ and 9″
  • 3/4″ x 20 thread
  • 1 1/6″ socket
See More

Yukon Gear – Master Overhaul Kit For Ford 9" LM104911 Differential, 28 Spline Pinion (Part No.14062)

Master Overhaul Kit For Ford 9" LM104911 Differential, 28 Spline Pinion

from

$544.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits Ford 9″ with oversize pinion support and 28 spline pinion
  • Fits Ford 9″ with LM104911 carrier races
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush, and gasket.
See More

Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)

Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler

from

$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.

Product Features:
  • Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
See More

Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)

Trac Loc Spring For Ford 9" & 8"

from

$8.99
Product Features:
  • Trac Loc spring for Ford 8″ and 9″
See More

Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)

Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out

from

$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.

Product Features:
  • Side adjuster lock bolt
See More

Driveworks – Taper Bearing Set (Part No.S-A-6)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Ford 9" In A 3.89 Ratio (Part No.24107)

High Performance Ring & Pinion Gear Set For Ford 9" In A 3.89 Ratio

from

$404.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits Ford 9″
  • 9.00″ ring gear diameter
  • 28 spline pinion
  • 10 ring gear bolts
  • 3.89 ratio
See More

USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Extra Short (Part No.17044)

9" Ford Spartan Locker Cross Pin, Extra Short

from

$22.99
9″ FORD SPARTAN LOCKER EXTRA SHORT Cross Pin SHAFT .

Product Features:
  • USA Standard Gear heavy-duty cross pin shaft
  • Fits Ford 9″
See More

National – Shaft Repair Sleeve (Part No.99106)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)

Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia - Knurl

from

$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.

Product Features:
  • Axle stud for AMC Model 20 and Model 35
  • 1/2″ x 20 thread
  • 0.620″ knurl diameter
  • 1.625″ long
See More

Felpro – Differential Cover Gasket (Part No.RDS 13073)

Differential Cover Gasket

from

$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 4 Quarts (Part No.15004)

Redline Synthetic "Shock Proof" Oil - 4 Quarts

from

$137.99
Redline Synthetic “Shock Proof” Oil. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil
See More

Powertrax – Grip PRO Traction System (Part No.GT109031)

Grip PRO Traction System

from

$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More

Yukon Gear – Pinion Depth Shims For Ford 8" (Part No.55055)

Pinion Depth Shims For Ford 8"

from

$31.99
8″ Ford pinion shim kit.

Product Features:
  • Pinion depth shims for Ford 8″
See More

Yukon Gear – 8" Ford O-Ring (Part No.30027)

8" Ford O-Ring

from

$9.99
8″ Ford O-ring.

Product Features:
  • Pinion support o-ring
  • Fits Ford 8″
See More

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)

Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt

from

$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
  • 7/16″ head
  • .925″ long
See More

National – Shaft Repair Sleeve (Part No.99181)

Shaft Repair Sleeve

from

$37.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.R-1535-TAV)

Bearings

from

$41.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • High radial load capacity makes them suitable for high speed applications
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Popular 1961 Ford Falcon Drivetrains Categories

1961 Ford Falcon Drivetrains

You count on your 1961 Ford Falcon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 222 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1961 Ford Falcon.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 10 different brands like National, Yukon Gear, and Felpro. 1961 Ford Falcon Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 92 extensive product reviews on 1961 Ford Falcon Drivetrains.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1961 Ford Falcon below to get started!

Top-Rated Drivetrains Brands For Your 1961 Ford Falcon

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1961 Ford Falcon running right for years to come. In our inventory you’ll find brands like National, Yukon Gear, Felpro, and even more.

Popular National Drivetrains

You’ll find popular National brand products across Differentials. All are waiting to get your 1961 Ford Falcon back on the road. Some of the top-rated National products in these categories are:
Multi Purpose Seal
from $11.79
(2)
Multi Purpose Seal
Differential Pinion Seals
Shaft Repair Sleeve
from $37.99
(1)
Shaft Repair Sleeve
Differential Pinion Pilot Bearings
Shaft Repair Sleeve
from $33.99
(1)
Shaft Repair Sleeve
Drive Shaft Seals

Top-Rated National Drivetrains


If National are what you’re looking for, our inventory holds plenty. We stock National brand Drivetrains for your 1961 Ford Falcon, and some of our most reviewed National parts include:
Bearings
from $16.99
(39)
Bearings
Axle Shaft Bearings
Bearings
from $18.79
(3)
Bearings
Front Differential Pinion Bearings