1961 Ford F-250 Pickup Performance Engines
More 1961 Ford F-250 Pickup Performance Engines
Find your specific 1961 Ford F-250 Pickup original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1961 Ford F-250 Pickup Performance Engines
Mr. Gasket – Ultra Seal: Harmonic Balancer Bolt/Washer Kit (Part No.7847)
from
$38.49
Mr. Gasket Harmonic Balancer Bolt for Ford V8 except 351C. Fits 221,260,289,302,351W small block Windsor engines, 332,352,360,390,406,410,427,428 FEs, and 429,460 385 series big blocks. 5/8-18 x 2 inch long heat treated black oxide coated Grade 8 alloy steel with a thick parallel ground washer to provide accurate, uniform torque.
Product Features:
See More
Product Features:
- Heat treated black oxide coated Grade 8 alloy steel
- Thick parallel ground washer provides more accurate, uniform torque
- Hex Prevents Socket Slippage
- Accurate And Uniform Torque
- Black Plated Finish
Edelbrock – INTAKE MANIFOLD (Part No.3723)
from
$354.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – RPM Air-Gap Small Block Ford 302 Black Intake Manifold (Part No.75213)
from
$576.99
Edelbrock part #75213 RPM Air-Gap intake manifold is designed for street 289 302-347 c.i.d. Ford V8’s. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competition intakes for decades. The Air-Gap design
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.3 in. Front Height, 4.9 in. Center Height, 5.5 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – #21053 Performer 390 Intake Manifold, Ford FE, 332-428, Black Finish (Part No.21053)
from
$479.99
The Edelbrock Performer 390 #21053 intake manifold is designed for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8’s with medium- or low-rise cylinder heads. Manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or
See More
Edelbrock – Performer 400 Intake Manifold for 1971-82 Ford 351/M400 (Part No.2171)
from
$421.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Mr. Gasket – Intake Manifold Bolts (Part No.958G)
from
$19.99
These grade 5 hex head bolts are brite zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 5/16 inch-18 x 2 inch bolts & washers
Product Features:
See More
Product Features:
- Hex Head
- Zinc Plated
- Ideal For Minimal Space
- 12-Point Head And Flange
- Zinc Plated For Protection
Edelbrock – Performer 390 Intake Manifold for Ford FE, Polished Finish (Part No.21051)
from
$875.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer Truck 5.0L Intake Manifold Small-Block Ford (Part No.3841)
from
$1086.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Removable Plenum Cover for Runner Access
- Base Manifold is CNC Matched to Upper Manifold
- 50 State Street Legal for 1987 to 96 5.0L Engine
- Upper Manifold ; Cover Powder-Coated Titanium Gray
- Accepts All Stock Hardware
- Match w/Other Power Packages for More Performance
- Use With Stock Replacement Twin Throttle Body
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Black Finish (Part No.21213)
from
$442.99
Edelbrock part #21213 Performer 289 intake manifold is designed for street 260-289-302 c.i.d. Ford V8’s without EGR. Will not fit Boss 302 or 255 c.i.d. V8’s. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.5 in. Front Height, 4.12 in. Center Height, 4.75 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – RPM Air-Gap Small Block Ford 351W Intake Manifold (Part No.7581)
from
$468.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Improve performance on the street or race track. Larger cross-sectional area and taller card flange. Compatibility with large displacement 351W based engines. For 4 bbl carbs. Available in cast, polished and endurashine finish.
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Designed For Street And High Performance
- Larger Cross Sectional Area
- Taller Carb Flange
- Compatibility w/Large Displacement 351W Based Eng.
Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)
from
$341.99Product Features:
- Best for the Ultimate in Street High-Performance
- Designed for 1500 to 6500 RPM Street-Driven Power
- Dual-Plane High-Rise Intake w/180 deg Firing Order
- Produces Incredible Top-End Horsepower
- Retains Good Throttle Response and Acceleration
- Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford, Polished Finish (Part No.21211)
from
$579.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal
Edelbrock – Performer 351 Intake Manifold for Ford 351- 2V Cleveland Engine (Part No.2750)
from
$416.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts both 4V and 2V Carburetors
Edelbrock – RPM Air-Gap Small Block Ford Polished Intake Manifold (Part No.75811)
from
$772.99
Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM. Improve performance on the street or race track. Larger cross-sectional area and taller card flange. Compatibility with lar
Product Features:
See More
Product Features:
- Based on Performer RPM-Series with Unique Air Gap
- Air Gap Cooler and Denser Mixture for More Power
- Designed For 1500 To 6500 RPM
- Designed For Street And High Performance
- Larger Cross Sectional Area
- Taller Carb Flange
- Compatibility w/Large Displacement 351W Based Eng.
Edelbrock – Performer 351-W Intake Manifold for S/B Ford 351 Windsor, Black Finish (Part No.21813)
from
$597.99
Edelbrock part #21813 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8’s. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 3.4 in. Front Height, 4.07 in. Center Height, 4.75 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)
from
$432.99
Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i
Product Features:
See More
Product Features:
- RPM Air-Gap for 302-331-347 Small-Block Ford V8
- Air-Gap design features an open air space under the plenum
- Separates fuel and air from engine heat
- Larger runners over standard 7121 manifold
- Includes nitrous bosses
Edelbrock – Performer 351-W Intake Manifold for S/B Ford 351 Windsor (Part No.2181)
from
$382.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Stock Replacement
- 50-State Street Legal
Edelbrock – Performer Intake Manifold Small-Block Ford (Part No.3781)
from
$401.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)
from
$299.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal
- Available in Multiple Finishes
Weiand – High-Rise Dual Plane Intake Manifold for Maximum Torque (Part No.8012)
from
$359.99Product Features:
- High Rise/Dual Plane Design For Maximum Torque
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking
- More Consistent Castings
Edelbrock – Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish (Part No.2166)
from
$397.99
Product Features:
See More
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Edelbrock – Torker II Small Block Ford 351W Intake Manifold (Part No.5081)
from
$403.99
Edelbrock part #5081 Torker II 351W intake manifold is designed for 1969 and later 351 Windsor Ford V8 high-performance engines with Edelbrock heads, OEM 12- or 16-bolt heads or equivalent. Will not fit “Boss 351” Cleveland. Manifold not equipped with EGR
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
Edelbrock – Torker II 302 Intake Manifold Small-Block Ford (Part No.5021)
from
$376.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
Weiand – Hi-Ram; Intake Manifold (Part No.1993)
from
$636.99Product Features:
- Square Flange Carburetor Mounting
- Special D-Shaped Port Runner Design
- Large Plenum Chamber
Weiand – Action +Plus; Intake Manifold (Part No.8010)
from
$349.99
New Everbright(TM) Manifold coating now available on the most popular Weiand and Holley intakes uses proprietary vacuum metalizing technology combined with a protective clear powdercoat to provide long lasting, virtually maintenance free polished looks.
Product Features:
See More
Product Features:
- Low Rise/Dual Plane Design For Maximum Torque
- Permanent Mold Casting Process
- Lighter/Smoother/Better Looking/Consistent Casting
- Dyno Proven To Make 25hp Over Competition
- Fully CNC Machined For A Perfect Fit
- Square Bore Carburetor Flange
- Exhaust Crossover For Improved Street Drivability
Edelbrock – Torker II 460 Big Block Ford Intake Manifold (Part No.5066)
from
$473.99
2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response. Available in cast or polished.
Product Features:
See More
Product Features:
- 2500 to 6500 RPM High Performance Street Engines
- Single-Plane Low-Rise Intake Good for High RPM
- Ideal for Applications with Limited Hood Clearance
- For Top-End HP and Adequate Throttle Response
Edelbrock – Performer 351 Intake Manifold for Ford 351- 4V Cleveland (Part No.2665)
from
$442.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts both 4V and 2V Carburetors
Edelbrock – Victor Jr. 302 Intake Manifold Small-Block Ford (Part No.2921)
from
$451.99
Race winning design for all types of competition. Single plane maximizes torque and horsepower. Runners feature extra material for custom porting. For performance in 3500 to 7500 RPM range. For modified OE or aftermarket Windsor aluminum heads. Match with Edelbrock heads for maximum performance. Port exits can be opened to 2.10 x 1.18 inch. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Race Winning Design for all Types of Competition
- Single Plane Maximizes Torque and Horsepower
- Runners Feature Extra Material for Custom Porting
- For Performance in 3500 to 7500 RPM Range
- For Modified OE or Aftermarket Windsor Alum Heads
- Match with Edelbrock Heads for Max Performance
- Port Exits Can be Opened to 2.10 x 1.18 in.
Popular 1961 Ford F-250 Pickup Performance Engines Categories
1961 Ford F-250 Pickup Performance Engines
Maybe you’re in the middle of a full rebuild of that 1961 Ford F-250 Pickup. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 2 different Performance Engines in our inventory ranging from $38.49 to $875.99. That means you can find the exact parts or products you need to keep that 1961 Ford F-250 Pickup running smoothly.
Performance Engines are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1961 Ford F-250 Pickup. Mr. Gasket and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1961 Ford F-250 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Engines to keep your 1961 Ford F-250 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1961 Ford F-250 Pickup Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1961 Ford F-250 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 Pickup the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
FAQs for 1961 Ford F-250 Pickup Performance Engines
What are the most purchased Performance Engines for the 1961 Ford F-250 Pickup?
Out of 2 Performance Engines for the 1961 Ford F-250 Pickup, the most popular in our inventory are:
from
$38.49
This product is not rated
Ultra Seal: Harmonic Balancer Bolt/Washer Kit
Performance Engine Harmonic Balancers
from
$875.99
This product is not rated
Performer 390 Intake Manifold for Ford FE, Polished Finish
Performance Intake Manifolds
