1961 Chevrolet K10 Ignition and Tune-Up Products

Below you will find various in-demand Chevrolet Ignition and Tune-Up Products, components and accessories for your 1961 K10. Advance Auto Parts has popular K10 parts like Spark Plugs, Ignition Wires, Ignition Coils and Boots and more. You’ll also find aftermarket and OEM Ignition and Tune-Up Products for other K10 model years including 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986 and more. Select a category of 1961 Chevrolet K10 Ignition and Tune-Up Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1961 Chevrolet K10 Ignition and Tune-Up Products Categories

Standard Spark Plug Wires

Optional Spark Plug Wires

Ignition Conversion Kits

Distributor Cap Kits

Distributor Rotor Buttons

Points and Condensers and Kits

Ignition Coil Mounting Brackets

Ignition Capacitors

Essential Ignition and Tune-Up Products for 1961 Chevrolet K10s

from

$215.99

The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$28.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$53.99

The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.

Product Features:

Designed w/performance in mind
High quality; voltage insulating material
Stainless Terminals
High dielectric properties

from

$40.99

Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provides cooler operating temperatures.

Product Features:

Made from hi-performance 60 KV rated alkyd molding compound.
Cap and rotor kits include nylon rotor hold-down screws.
Flame-Thrower dust covers provide a larger air gap around the coil.

from

$19.79

ACDelco Professional Ignition Contact Set is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket set is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$25.99

The Ignition Contact Set is used in older vehicle applications to ground the ignition coil primary circuit and create the high secondary voltage required in the ignition process. Connected to the contact set is a condenser designed to absorb the high voltage spike created when the contact set opens.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$4.29

Autolite Copper spark plugs are designed to provide reliable performance and durability, making them an excellent choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, these spark plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes are engineered for extended life, while the nickel-plated shell offers superior corrosion resistance for long-lasting durability. The high alumina multi-rib ceramic insulator enhances thermal conductivity and insulation, contributing to increased strength and reliability. With a mid-projection standard center electrode design and a tapered seat type, these spark plugs are built for optimal compatibility and performance. Engineered to improve fuel economy, they help reduce fuel costs without compromising on power. Additionally, their advanced design ensures smoother acceleration, delivering a more responsive and enjoyable driving experience. Ideal for regular-grade applications, these spark plugs combine value, efficiency, and durability to meet your vehicle’s performance needs.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Engineered to optimize fuel efficiency, these spark plugs help you save on fuel costs while maintaining excellent performance.
Smooth Acceleration: Experience smoother acceleration with Autolite’s advanced copper spark plug design, providing a more responsive driving experience.

from

$5.99

ACDelco Gold (Professional) Conventional Spark Plugs are a high quality alternative to Original Equipment (OE) parts. These conventional spark plugs are designed for reliability and efficient performance. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Nickel Center Electrode Tip: Provides efficient and consistent spark for optimal engine performance.
Outstanding Suppression Characteristics: Ensures reliable performance by reducing radio frequency interference.
Tapered Seat Type: Designed for a secure fit and optimal function in various engine types.

from

$65.99

Performance upgrade for 7mm OE applications, silicone jacket with fiberglass braid EPDM insulation, tinned copper core, rated at 450 degrees Fahrenheit. Includes 8 blue extra-long wires, coil lead, silicone boots, zinc-plated steel terminals. Requires terminal and boot installation on distributor end.

Product Features:

Silicone Spark Plug Boots
90 Degree Spark Plug Boot Angle
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$88.99

Most modern electronic ignition systems require suppression style wires to preserve sensitive components. Flame-Thrower 8mm Custom fit MAGx2 wires provide enhanced RFI suppression and dual current paths for more power delivered to the spark plug. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cutting, crimping and splicing.

Product Features:

Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
Low 500 ohm per foot resistance.
8mm Silicone jacket to resist high temperatures, moisture, oil and chemicals.
EPDM (Ethylene Propylene Diene Methylene) inner insulation for superior heat resistance and prevention of arcing and voltage leaks.
Fiberglass reinforcing braid for added strength and flexibility.

from

$185.99

The Ignitor II provides increased starting voltage with adaptive dwell control. Ignitor Module Kits are extremely easy to install and fit into your original distributor to maintain your stock look. No additional ignition box is required keeping a clean look under the hood. Ignitors are available for most distributors that came with mechanical breaker points and will cover AUTOMOTIVE, MARINE, INDUSTRIAL and AGRICULTURE applications.

Product Features:

Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
Compensates for inherent electronic delay by adjusting the spark timing throughout the entire RPM range.
Synchronized peak current and spark timing reduces heat build-up.
Senses startup and develops more energy for quicker, easier starting.
Pair with a Flame Thrower Canister Coil for optimal performance
Legal in all 50 states and Canada (C.A.R.B. E.O. No. D-57-22)

from

$179.99

Flame Thrower Street/Strip distributors have a speciallFlame-Thrower Street/Strip distributors have a specially designed HEI distributor module and coil combination which operates without misfire beyond 7500 RPM. That’s nearly 3000 RPM higher than most stock HEI Distributors. Race HEI Distributors feature an electronic HEI Distributor module and 50,000 volt coil combination that optimizes spark energy and peak current to the spark plug in the 6000 to 8500 RPM range.y designed module and coil combination which operates without misfire beyond 7500 RPM

Product Features:

Kits include street-strip 4-pin module and coil combination.
Custom Flame-Thrower coil cover, adjustable vacuum advance canister, hi-performance advance kit.
Wire harness and capacitor, and complete installation hardware.
Race Only

from

$9.99

The distributor cap & rotor are just two pieces of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$8.99

BWD SELECT designs, specifies, and manufactures replacement parts with one goal in mind-make them the very best. To maximize performance and longevity, we use the finest materials and improve on OE specifications, whenever possible.

Product Features:

High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze. The housing is fabricated using polyamide resins. All of the materials together provide the connectors with prolonged life and superior performance.
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$158.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [6] 90 Deg. Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$44.99

CARQUEST Premium Spark Plug Wire Sets are engineered to restore ignition wire reliability and performance. They are designed to meet or exceed OE design requirements, performance, fit, form and function of the OE wire. Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.

Product Features:

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$161.99

Less than 50 ohms per foot for superior spark
Ferro-magnetic impregnated core creates an effective EMI choke
40 ft. Of Conductor Wound Into A Single Foot Of Wire
For high EMI suppression
Conductor core features Dupont Kevlar material
Proprietary compound sleeves for resistance to high heat/abrasion

from

$47.49

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

from

$13.99

All ignition system accessories are application matched components designed to restore your original ignition system to like new condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$206.99

TSP Pro Series Ready to Run Distributor is perfect for a street performance upgrade. It features a CNC-machined billet aluminum body and hardened steel shaft, with a sealed ball bearing on top and a sintered steel bushing on the bottom. It also comes with a fully adjustable mechanical advance, vacuum advance, magnetic pickup trigger, and a high-output circuit board module with digital tach output. The dielectric cap comes with solid brass terminals and a color-matched wire retainer.

Product Features:

Advance Type: Vacuum and Mechanical
Terminal Style: Male
Trigger Style: Circuit Board Module with Magnetic Pick-Up
Gear Material: Steel

from

$449.99

Distributor

from

$88.99

TSP HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup.

Product Features:

Advance Type: Vacuum and Mechanical
Coil Type: HEI Coil (Included)
Terminal Style: Male
Trigger Style: Magnetic

from

$52.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty (limited). Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$31.49

Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$121.99

An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.79

ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

Upgrade your 1961 Chevrolet K10 with Top-Quality Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1961 Chevrolet K10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Ignition and Tune-Up Products are key to keeping your K10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 46 Ignition and Tune-Up Products for the 1961 Chevrolet K10, designed to meet your needs without breaking the bank. From Spark Plug replacements to Ignition Wires upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Ignition and Tune-Up Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Ignition and Tune-Up Products for your 1961 Chevrolet K10 at great prices. Our Ignition and Tune-Up Products inventory for this model ranges from just $1.89 to $665.99, with an average price of $155.26. Our 46 Ignition and Tune-Up Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1961 Chevrolet K10 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1961 Chevrolet K10, we stock popular OEM and aftermarket Ignition and Tune-Up Products from top names like Champion, ACDelco, Accel, and more. Champion Ignition and Tune-Up Products start at just $1.89 and boast an impressive 4.7 stars average rating from customers. ACDelco and Accel also bring quality to the table, with Ignition and Tune-Up Products available starting at $5.99, and at an average 4.7 stars rating. With 61 customer reviews and counting, our 1961 Chevrolet K10 Ignition and Tune-Up Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Ignition and Tune-Up Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1961 Chevrolet K10 is always ready to roll. We’re committed to providing you with everything you need to keep your K10 in top shape, all in one place. Start shopping confidently below for your 1961 Chevrolet K10!

Best-Selling Spark Plugs for 1961 Chevrolet K10s

Enhance the driving experience in your Chevrolet with 6 quality Spark Plug components, starting at $1.89.

show more show less

from

$5.99

ACDelco Professional Conventional Spark Plugs are designed for reliability and efficient performance, and are a high quality replacement for many vehicles on the road today. Their high-quality copper cores and outstanding suppression characteristics deliver reliable performance. They are also available for Marine applications. These premium aftermarket replacement spark plugs are manufactured to meet your expectations for fit, form, and function.

Product Features:

Black Onyx coating helps reduce corrosion
Copper core provides great heat transfer and helps maximize plug durability
Ribbed suppressor seal extends resistance and helps prevent spark ‘flash over’ and misfires
Nickel-chrome alloy sheathing helps prevent corrosion on center electrode
Available for use in Marine applications
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Premium aftermarket replacement part
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Nickel Center Electrode Tip: Features a nickel center electrode tip for enhanced reliability and efficient performance in various driving conditions.
Outstanding Suppression Characteristics: Engineered with outstanding suppression characteristics to deliver reliable performance and reduce radio frequency interference.

from

$1.89

The Copper Plus spark plug is engineered for dependable performance and durability, making it an ideal OE-type replacement. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. Its nickel-tipped center and ground electrodes enhance conductivity while resisting fouling, ensuring reliable ignition under various conditions. Built to ISO and SAE Standards, this spark plug delivers proven performance and superior corrosion resistance, making it a trusted choice for maintaining engine efficiency. With a flat seat type and standard-grade design, it offers compatibility with a wide range of applications, providing excellent value for long-term use.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$3.29

Copper Plus spark plug delivers dependable performance and durability, making it an ideal choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat control for extended lifespan and consistent wear. The nickel-tipped center and ground electrodes enhance conductivity while resisting fouling, ensuring reliable ignition under various conditions. Designed as an OE-type replacement, this spark plug meets ISO and SAE Standards, guaranteeing proven performance and compatibility with a wide range of vehicles. Its flat seat design and superior corrosion resistance further contribute to its reliability, making it a cost-effective solution for long-term use.

Product Features:

Resists fouling
Superior corrosion resistance
Dependable and proven performance
Increased conductivity and heat control for good overall wear

from

$3.99

Autolite Copper spark plugs are designed to provide reliable performance and long-lasting durability for your vehicle. Featuring a copper core center electrode, these plugs excel in thermal control and resist fouling, ensuring consistent operation. The high nickel alloy center and ground electrodes enhance longevity, while the high alumina multi-rib ceramic insulator boosts thermal conductivity and insulation strength. A nickel-plated shell offers superior corrosion resistance, making these plugs a durable choice for extended use. Engineered for optimal fuel combustion, they contribute to improved fuel efficiency, helping you save at the pump. Additionally, their advanced design ensures smoother and more responsive acceleration, enhancing your driving experience. With a standard center electrode design, short projection, and flat seat type, these spark plugs are built to meet regular-grade requirements while delivering exceptional performance.

Product Features:

The copper core center electrode aids in thermal control and improves resistance to fouling.
Its specially engineered high nickel alloy center and ground electrode provides extended life.
The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
Good Fuel Economy: Designed to optimize fuel combustion, these spark plugs help improve your vehicle’s fuel efficiency, saving you money at the pump.
Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.
Smooth Acceleration: Experience smoother and more responsive acceleration with the advanced engineering of Autolite Copper Spark Plugs.

from

$2.49

Copper Plus spark plug RJ6C delivers dependable performance and durability, making it an ideal choice for maintaining your vehicle’s efficiency. Featuring a copper core center electrode, it ensures precise heat control and enhanced conductivity, promoting longer life and consistent wear. The nickel-tipped center and ground electrodes provide superior corrosion resistance, ensuring reliable ignition performance over time. Designed as a standard replacement, this spark plug meets ISO and SAE Standards, guaranteeing proven performance and compatibility with a wide range of vehicles. Its flat seat type and built-in resistor further enhance its functionality, making it a trusted solution for optimal engine operation.

Product Features:

Copper Plus – Dependable Performance and Durability
Copper core center electrode allows for accurate control of heat range for longer life
Superior corrosion resistance
Built to ISO and SAE standards for proven performance
Built to ISO and SAE standards for proven performance

from

$2.49

The U-Groove Spark Plug with its patented U-groove ground electrode design ensures superior ignitability, allowing your engine to fire leaner mixtures for enhanced efficiency and performance. Crafted with a nickel center electrode tip and a flat seat type, this spark plug is engineered for durability and precision. Its machine-rolled threads minimize the risk of seizing or cross-threading, making it ideal for use in delicate aluminum heads. Designed to last twice as long as conventional plugs, it offers a lifespan exceeding 30,000 miles, providing exceptional value and reliability. Pre-fired for consistent operation, this spark plug is compatible with a wide range of vehicles, including classic and collector cars, ensuring versatility for various applications. Whether you’re maintaining a daily driver or restoring a vintage gem, this U-Groove spark plug delivers OE performance you can trust.

Product Features:

Patented U-groove ground electrode design fires leaner mixtures than conventional plugs
Precision machine-rolled threads reduce seizing and cross-threading in delicate aluminum heads
Wide range of part numbers for thousands of applications, including classic and collector cars
Lasts twice as long as most conventional plugs
100 percent pre-fired to assure reliable operation
U-Groove Conventional

Most Popular 1961 Chevrolet K10 Ignition Wires

Customize your Chevrolet with 3 Ignition Wires products like Standard Spark Plug Wires and Optional Spark Plug Wires, all priced under $112.99.

show more show less

from

$112.99

The traditional ACCEL combination of yellow wire and red spark plug boots has been added to these SuperStock Spiral Core 5000 Series wire sets, which feature color-matched wire and spark plug boots in blue, black, and red. With only 500 ohms/ft. of resistance, more ignition energy can reach the spark plug, producing a longer-lasting, hotter spark flame kernel. The results is higher performance through improved efficiency, quicker throttle response, and reduced emissions. This 8mm wire’s double silicone construction is rated to 550 degrees F. The high-gloss wire jacket resists moisture, chemicals, and heat extremes for longer life and great looks. The fiberglass braid adds greater pull strength and terminal retention, while the stainless steel spark plug terminals provide excellent long life, electrical conductivity, and corrosion resistance. Both universal and custom-fit applications are available for early and late model cars and trucks.

Product Features:

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$101.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$28.99

Product Features:

PERFECT FIT FOR YOUR VEHICLE: Built to OEM tolerances with OE quality or better materials
BUILT TO LAST: Outer Jacket built to withstand temperatures greater than 250 degrees Celsius, inner insulation EPDM or silicone for best dielectric strength
STAINLESS STEEL TERMINALS: Provide the highest possible retention to ensure positive connections through the life of the set
CYLINDER LEAD ID: Cylinder lead identification tags where possible make installation easier
LIMITED WARRANTY: See package for details

Top Picks for 1961 Chevrolet K10 Ignition Coils and Boots

Upgrade Chevrolet K10s with top-quality Ignition Coils and Boots parts, including 12 OEM and aftermarket selections for your 1961 model.

show more show less

from

$53.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

Chrome Plated
42000 Volts
Effective To 6500 RPM
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$52.99

Built by IATF 16949 certified manufacturers for consistent durability
Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
Segmented secondary bobbins to distribute high voltage and prevent shorting
Extensive design validation testing to ensure long-lasting reliability
100% end-of-line tested to ensure proper performance
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$41.49

Long service life and durable performance
High dielectric strength for reliability
Corrosion-resistant connections
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
High reliability
Long service life

from

$81.99

An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:

High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$13.99

All ignition system accessories are application matched components designed to restore your original ignition system to like new condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$46.99

Product Features:

SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
EPDM inner insulation stops power-robbing voltage leaks.
With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
Excellent interference suppression and consistent performance
Easy lock terminals for more convenient installation.
Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
Broad coverage available for most vehicles on the road today
Include grease pack to ensure easy installation and removal

from

$116.99

Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:

Oil Filled For Better Cooling
Optimized Low Resistance
Silicon Magnetic Steel E-Core
Higher Energy/Voltage Outputs
Quicker Starts
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$85.99

Universal, 12-volt coil features an oil-filled design and arc resistant alkyd top for superior performance, insulation and cooling. The internal design of this coil eliminates the need for a separate ballast resistor. This coil is specifically designed to deliver optimum performance when used with: Mallory UNILITE or magnetic breaker less ignitions Mallory HYFIRE IV electronic ignition controls, and Mallory electronic ignition conversion kits.

Product Features:

12 Volt Coil
Oil-Filled Design
Arch Resistant Alkyd Top
Designed To Deliver Optimum Performance

from

$81.99

Excellent high performance coil for vehicles that have been converted from points to a breakerless electronic distributor or electronic ignition system, where a canister type oil filled can coil is preferred. Designed with optimized low resistance, high turns ratio windings to work specifically with ACCEL 41, 51, 52, 61 & 71000 Series breakerless electronic replacement distributors. Engineered for higher energy output resulting in quicker starting, improved throttle response and more high RPM power. Special crimped and soldered internal connections ensure positive contacts. High performance tan Alkyd tower provides “”flashover”” protection to primary terminals. Available in “”ACCEL Yellow”” or Chrome Plated can.

Product Features:

Engineered for higher energy output
Improved throttle responce
More high RPM power
Chrome Plated

from

$55.99

Our famous red canister coil in black! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the Blaster Coil line is the right choice. Our Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil-filled metal canister. The Blaster Coil is designed to mount in most factory canister coil mounts. MSD also offers a Chrome Coil Bracket, PN 8213. It is recommended to mount the PN 8202, PN 82023, and 8223 coils in an upright position. The High Vibration Coil, PN 8222, can be mounted in any position due to its epoxy potting compound.

Product Features:

Improved output coil for electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series (ballast resistor required for points)
Alkyd tower with high dielectric properties is less prone to carbon tracking
100:1 turns ratio and lower primary resistance produce high voltage output
Metal canister is filled with a premium grade oil for cooling
CARB E.O. Approved

from

$52.99

Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
100% pure copper precision-wound windings increase coil life and ensure reliability and maximum coil output when needed.
Highly conductive aluminum alloy secondary terminal guarantees secondary coil terminals will not oxidize (rust), will provide excellent conductivity, extended coil life and will not cause excessive stress on the primary control circuit.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure confidence and product reliability, every time.

from

$46.99

Edelbrock Ignition Coil No. 22739 is a universal 12-volt cannister-style coil designed as a high-quality direct bolt-on replacement for OEM ignition coils. This advanced coil has a primary resistance of 1.4 ohms with an output of 42,000 volts. Internally, each Edelbrock Coil features heavy-duty primary and secondary windings for higher energy and greater spark that can help to provide quicker starts with improved idle quality. With a durable oil-filled housing, Edelbrock Coils are resistant to heat, shock and vibration with an effective operating range of 0 to 6,500 RPM.

Product Features:

output of 42000V

In-Demand Distributors for 1961 Chevrolet K10s

Select from 13 premium Distributors parts for your 1961 Chevrolet K10, with prices ranging from $9.99 to $665.99.

show more show less

from

$21.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$9.99

All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Cap terminal conductor wires formed with precision guided machines to ensure precise final location in the final housing assembly.
Terminal inserts manufactured to precise tolerances to ensure a guaranteed electrical connection between the cap conductor wires and spark plug wire terminals.
Distributor rotor blade coated with RFI coating to prevent electrical magnetic interference with the vehicles electrical system.
Distributor and rotor housings manufactured using the latest plastic technologies to guarantee di-electric strength and long life cycle.

from

$665.99

Chevy produced a number of inline-6 engines over the years, some dinky powerless wonders and others that can be made to put out some pretty impressive torque and power numbers. For those that dare to be different or want to stick with original power plants, MSD has a distributor for you. While you may not see many 194 Cu. In. engines being built, the 250 and 292 are showing up more and more. This distributor fits them all, including the 230. Like all MSD Pro-Billet distributor, this housing is crafted from billet aluminum and MSD bolts in a non-magnetic pickup to fire the mandatory ignition control. There’s a vacuum advance to assist with economy and the adjustable mechanical advance makes it easy to tune in a specific curve. Pro-Billet inline-6, 194, 230, 250, 292 – PN 8515 note: must be used with an MSD 6, 7 or 8-series ignition.

Product Features:

Designed For Street/Performance Use w/Mech or Vacuum Advance
Will not fit 235 and 261 engines
Must Be Used w/An MSD Ignition Control
Supplied w/Socket Style Distributor Cap And Rotor
O-ring seals can be installed for oil press. control (Mods only)
Special oil tract improves lubrication to the dist./cam gear
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Mech. advance assem. can be locked out for crank trigger systems
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction
QPQ coated polished steel shaft; guided by sealed ball bearings

from

$424.99

Our line of Billet Plug n¿ Play Distributors are based on a precision CNC-machined housing with an upper ball bearing to support the steel distributor shaft accurately from idle to redline rpm. These distributors feature our maintenance-free Ignitor II or III electronic ignition module to produce a strong spark and steady ignition timing.

Product Features:

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$424.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$411.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$402.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$402.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$402.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$395.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$387.99

Precision CNC machined 6061-T6 billet aluminum housings are lightweight yet offer maximum strength.
Our Billet distributors ship with Ignitor II modules factory installed.
Each billet distributor is hand polished and buffed to a high luster.
Tempered distributor shaft has low torsion displacement for accurate timing and extended operational life.
Upper ball bearing and extra long oil impregnated bronze lower bushing work together to reduce friction and provide shaft and advance mechanism stability reducing high RPM vibration.

from

$171.99

Advance Type: Vacuum and Mechanical
Coil Type: HEI Coil (Included)
Terminal Style: Male
Trigger Style: Magnetic

from

$171.99

Advance Type: Vacuum and Mechanical
Coil Type: HEI Coil (Included)
Terminal Style: Male
Trigger Style: Magnetic

Most Sold 1961 Chevrolet K10 Ignition Boots

Explore our best-selling Chevrolet parts for the 1961 K10 among 5 OEM and aftermarket options starting from $59.99.

show more show less

from

$158.99

Set includes terminals for engines with early type (socket) and late type (HEI spark plug top) distributor caps. 90 degree boots and terminals factory installed on one end.

Product Features:

Extra Long 8.5mm Wires So You Can Cut To Your Designed Length
Incl. both socket-style and spark plug-style boots and terminals
Includes Mini-Stripper-Crimper For Factory Style Crimps
Size Includes [6] 90 Deg. Boots/Terminals
Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately

from

$59.99

ACCEL’s SuperStock 4000 series spark plug wire sets are designed to upgrade an OE ignition system for high-spark delivery levels for street driven applications. The 450 degree F rated silicone jacket is extruded over a tightly woven, rugged fiberglass braid. The braid is applied over high dielectric strength EPDM (Ethylene Propylene Diene Monomer) inner insulation for ignition wire performance that exceeds SAE specifications.

Product Features:

7mm Yellow Silicone Jacket
Street-driven Applications
Copper Core
Orange Spark Plug Boots
Pre HEI Vehicles
Universal Wire Set

from

$99.99

500 Ohms/ft Of Resistance
550 F Rated Silicone Jacket
Stainless Steel Plug Terminals
High RFI Suppression For Street And Strip Use
Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles
8mm High Gloss Silicone Jacket

from

$81.99

These ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.

Product Features:

Tinned copper core allows virtually no resistance
Great for points and magneto
450 Degree Wire Temperature Rating
Meets Or Exceeds OE Boot Temperature Rating

from

$81.99

7mm And 8mm High Gloss Silicone Jacket
450 F Rated Silicone Jacket
Stainless Steel Plug Terminals
RFI Suppression For Street Driven Applications
Custom-fit Universal And Import Coverage
High-strength Fiberglass Braid Construction
Pre And Post HEI Vehicles

Top-Rated Ignition and Tune-Up Products Brands For Your 1961 Chevrolet K10

Shop for the best-rated brands offering Ignition and Tune-Up Products and other products for your 1961 Chevrolet K10s. Below you’ll find some of our best rated Ignition and Tune-Up Products from Champion, ACDelco, and Accel, and more. Ignition and Tune-Up Products from these brands that fit a 1961 K10 start at just $1.89 and are rated as high as 4.7 stars. OEM and aftermarket Ignition and Tune-Up Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Champion 1961 Chevrolet K10 Ignition and Tune-Up Products

When it comes to maintaining or upgrading your 1961 Chevrolet K10, using quality Ignition and Tune-Up Products is essential to ensure durability and a perfect fit. Champion ticks all of those boxes. We offer a wide selection of Champion Ignition and Tune-Up Products, specifically designed for the 1961 Chevrolet K10. With over 2 Champion brand Ignition and Tune-Up Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $1.89, with an average price of just $2.59. Plus, with over 2 customer reviews and an average rating of 4.7 stars, you can trust that our Champion Ignition and Tune-Up Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $1.89

(1)

Copper Plus Spark Plug (J6C): Dependable Performance & Durability

“Na”

from $3.29

(1)

Copper Plus Spark Plug (J6C): Dependable Performance & Durability

“SEEMS TO BE A DURABLE PART AND IS WORKING WELL”

Popular ACDelco 1961 Chevrolet K10 Ignition and Tune-Up Products

ACDelco auto parts is one of the highest quality Ignition and Tune-Up Product brands in the market. Any 1961 Chevrolet K10 owner should feel confident when installing genuine ACDelco parts in their vehicle. To ensure the best fit and performance for your 1961 K10, Advance Auto Parts carries a full inventory of 1 ACDelco Ignition and Tune-Up Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these ACDelco Ignition and Tune-Up Products range up to $5.99, plus, with more than 2 customer reviews and an impressive 4.7 stars average rating, you can be confident the Fram Ignition and Tune-Up Products below will deliver on both quality and value.

from $5.99

(2)

Conventional Nickel Tip Copper Core Spark Plug: Reduces Corrosion & Maximizes Durability

“Worked fine for preventive maintenance.”

FAQs for 1961 Chevrolet K10 Ignition and Tune-Up Products

Which Ignition and Tune-Up Products are best-sellers for 1961 Chevrolet K10s?

Out of 46 Ignition and Tune-Up Products that fit 1961 Chevrolet K10s, the following parts are the top sellers:

Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5391571) – $3.99
Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (12351959) – $52.99
Copper Plus Spark Plug (J6C): Dependable Performance & Durability (18470102) – $1.89

What’s the price range for 1961 Chevrolet K10 Ignition and Tune-Up Products?

Ignition and Tune-Up Product prices for the 1961 Chevrolet K10 start at $1.89 and go up to $665.99 for the most premium parts.

What’s the average price of a Ignition and Tune-Up Product for a 1961 Chevrolet K10?

The average price for Ignition and Tune-Up Products for the 1961 Chevrolet K10 is $155.26. Keep in mind the variety of part types within our Ignition and Tune-Up Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Ignition and Tune-Up Products for other Chevrolet K10 model years?

Yes, we currently carry Ignition and Tune-Up Products for 15 model years of Chevrolet K10s between 1962 and 1986. Ignition and Tune-Up Products are bought most frequently for the following model years: 1986, 1985, 1984, 1983, 1982, 1981, 1980, 1979, and 1978.

What are the cheapest Ignition and Tune-Up Products for my 1961 Chevrolet K10?

The cheapest 1961 Chevrolet K10 Ignition and Tune-Up Products we carry in stock are:

Copper Plus Spark Plug (J6C): Dependable Performance & Durability (18470102) – $1.89
Copper Plus Spark Plug (RJ6C): Dependable Performance & Durability (10095065) – $2.49
U-Groove Spark Plug: OE Performance, W16PR-U (20650374) – $2.49
Copper Plus Spark Plug (J6C): Dependable Performance & Durability (18470679) – $3.29
Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (5391571) – $3.99

What are the top-rated Ignition and Tune-Up Products that fit the 1961 Chevrolet K10?

Out of 61 reviews by customers, our 1961 Chevrolet K10 Ignition and Tune-Up Products have an average customer rating of . These are some of the highest-rated Ignition and Tune-Up Product types for the 1961 Chevrolet K10 and their top-rated products:

Ignition Boots
- Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (22360316) – $158.99
- 8Mm Super Stock Spiral Uni Bu (6900348) – $99.99
- 7Mm Super Stock Copper Uni (5024072) – $59.99
Spark Plugs
- Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (22360316) – $158.99
- 8Mm Super Stock Spiral Uni Bu (6900348) – $99.99
- 7Mm Super Stock Copper Uni (5024072) – $59.99
Ignition Coils and Boots
- Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (22360316) – $158.99
- 8Mm Super Stock Spiral Uni Bu (6900348) – $99.99
- 7Mm Super Stock Copper Uni (5024072) – $59.99

What types of Ignition and Tune-Up Products do you sell for my 1961 Chevrolet K10?

As of 3/1/26, these are some of the most in-demand types of Ignition and Tune-Up Products for a 1961 Chevrolet K10:

Can I get help with 1961 Chevrolet K10 Ignition and Tune-Up Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Ignition and Tune-Up Products and more.

What is your return policy for Chevrolet K10 Ignition and Tune-Up Products?

Advance Auto Parts keeps returns simple. For new Chevrolet K10 Ignition and Tune-Up Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1961 Chevrolet K10 Ignition and Tune-Up Products

MSD Ignition – Wire Set; Super Conductor; Big Block Chevy; with PN 8541 Crab Cap (Part No.30829)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 7 Leads (Part No.51426)

MSD Ignition – Distributor Cap and Rotor; GM 4.3L; External Coil (Part No.8430)

PerTronix – D4051 Flame-Thrower HEI Distributor Cap Red (Part No.D4051)

ACDelco – Ignition Distributor Contact Set (Part No.D111)

Carquest Premium – Ignition Contact Set (Part No.AMA1057)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.25)

ACDelco – Conventional Spark Plug (Part No.R44T)

Accel – Universal Fit Super Stock 8mm Copper; Spark Plug Wire Set (Part No.4039B)

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

PerTronix – 91181 Ignitor II Adaptive Dwell Control Delco 8 cyl (Part No.91181)

PerTronix – D8001 Flame-Thrower Gm Hei Tune Up Chevrolet/Cadillac Kit Red Cap (Part No.D8001)

Carquest Premium – Distributor Rotor (Part No.DAA1025)

Carquest – Distributor Rotor (Part No.D152)

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Carquest Premium – Spark Plug Wire Set: 8 Wires, Increased performance, Designed for direct fit (Part No.35-8103)

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 8 Leads (Part No.51351)

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Top Street Performance – Chevy Small Block (262-400)/Big Block (396-454) V8 Fixed Collar Pro Series Ready to Run Distributor with Red Cap (Part No.JM7701-2R)

MSD Ignition – Distributor (Part No.8362CT)

Top Street Performance – Chevy Small Block (262-400)/Big Block (396-454) V8 HEI Distributor with Black Super Cap (Part No.JM6500BK)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1065)

GM Genuine Parts – Ignition Coil (Part No.D505A)

ACDelco – Ignition Capacitor (Part No.D203)

ACDelco – Conventional Nickel Tip Copper Core Spark Plug: Reduces Corrosion & Maximizes Durability (Part No.R43)

Champion – Copper Plus Spark Plug (J6C): Dependable Performance & Durability (Part No.823)

Champion – Copper Plus Spark Plug (J6C): Dependable Performance & Durability (Part No.823-1)

Autolite – Copper Resistor Spark Plug: Quick Starts & Enhanced Durability (Part No.303)

Champion – Copper Plus Spark Plug (RJ6C): Dependable Performance & Durability (Part No.102)

DENSO – U-Groove Spark Plug: OE Performance, W16PR-U (Part No.3037)

Accel – 8Mm Super Stock Spiral Uni Rd (Part No.5040R)

Accel – 8Mm Super Stock Spiral Uni Bk (Part No.5040K)

NGK – Premium OE Fit & Design Spark Plug Wire Set: Ferrite Mag Core, 7 Leads (Part No.51426)

Accel – Super Stock Coil Chrome (Part No.8140C)

Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1414)

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

ACDelco – Ignition Coil (Part No.U505)

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6326)

Accel – Supercoil (Part No.140001)

Mallory – Universal Street Performance Ignition Coil (Part No.29219)

Accel – Super Stock Elect Coil Chrome (Part No.8145C)

MSD Ignition – Blaster 2 Black Coil; Hi-Performance (Part No.82023)

Carquest Premium – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.EBC1715)

Edelbrock – Ignition Coil No. 22739 12V Cannister Style, 1.4 Ohm Primary Resistance (Part No.22739)

Carquest Premium – Distributor Cap (Part No.CAC1081)

Carquest Premium – Distributor Rotor (Part No.DAA1025)

MSD Ignition – Distributor; Chevy In-line 6-cyl.; 250/292 (Part No.8515)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100810)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100811)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100801)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100700)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100800)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100701)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100710)

PerTronix – Flame-Thrower Electronic Distributor Billet (Part No.D100711)

Top Street Performance – Chevy 1962 & Earlier (194-261) & Toyota Land Cruiser 1968-1987 (3.8 L-4.2) Inline 6 HEI Distributor with Black Cap (Part No.JM6516BK)

Top Street Performance – Chevy 1962 & Earlier (194-261) & Toyota Land Cruiser 1968-1987 (3.8 L-4.2) Inline 6 HEI Distributor with Red Cap (Part No.JM6516R)

MSD Ignition – Wire Set; Super Conductor; Multi-Angle Plug; Socket/HEI (Part No.31179)

Accel – 7Mm Super Stock Copper Uni (Part No.3008)

Accel – 8Mm Super Stock Spiral Uni Bu (Part No.5040B)

Accel – 8Mm Super Stock Copper Uni (Part No.4038B)

Accel – 8Mm Super Stock Copper Uni (Part No.4038)