1960 Mercury Monterey Steering and Chassis Parts
More 1960 Mercury Monterey Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1960 Mercury Monterey, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1960 Mercury Monterey Steering and Chassis Parts
Cardone – Power Steering Pump (Part No.20-6054)
from
$59.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)
from
$17.79
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response and du
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Rare Parts – Idler Arm Repair Kit (Part No.RP20330)
from
$125.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
MOOG – Ball Joint (Part No.K8212)
from
$49.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Carquest Premium – KIT, CTRL VLV SEAL Assembly (Part No.7882)
from
$48.49
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
See More
Powercraft – Control Valve Complete Rebuild Kit (Part No.7885)
from
$95.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
National – Multi Purpose Seal (Part No.240414)
from
$4.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Powercraft – Steering Gear Major Seal Kit (Part No.7860)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rare Parts – Tie Rod End (Part No.RP25687)
from
$126.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP25586)
from
$232.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Greaseable
- Precision machining tolerances
- Heat treated components
- Low friction
Rare Parts – Tie Rod Assembly (Part No.RP25672)
from
$193.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Driveworks – Suspension Ball Joint (Part No.DW-K8212)
from
$17.99
Driveworks ball joints are made to meet or exceed OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks chassis parts ensure improved steering response and durability.
See More
TRW – Ball Joint Kit (Part No.L2021454400TRW)
from
$51.85
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.
Product Features:
See More
Product Features:
- Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
- Low friction plastic bearings that enhance damping and reliability
- Manufactured using forged or cold formed steel
- Two-seat design is standard, and eliminates the need for a spring
- Top of the ball pins are polished
- Salt Spray Test (240hrs)
- Dynamic Test and Elasticity Test
- Original Equipment quality hardware installation accessories
Powercraft – Pump Seal Kit (Part No.7918)
from
$30.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Seal Kit (Part No.8501)
from
$32.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Complete Rebuild Kit (Part No.7910)
from
$53.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Powercraft – Pump Drive Shaft Seal Kit (Part No.8709)
from
$10.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Taper Bearing Set (Part No.S-A-12)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Cardone – Power Steering Filter (Part No.20-0058F)
from
$42.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Carquest Premium – Power Steering or Hydraulic Element (Part No.85653)
from
$21.89
CARQUEST HD hydraulic filters maintain optimal system cleanliness levels and are essential to ensuring reliability and reducing maintenance costs while meeting OE recommended service intervals.
Product Features:
See More
Product Features:
- Conventional cartridge hydraulic filter
- Made in USA
National – Multi Purpose Seal (Part No.6835S)
from
$9.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.8773S)
from
$9.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Lares – Remanufactured Power Steering Cylinder (Part No.35)
from
$286.99
Power Steering Cylinders are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All units have new chrome shafts. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Powercraft – Power Cylinder Boot Kit (Part No.8901)
from
$66.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Powercraft – Power Cylinder Complete Rebuild Kit (Part No.7875)
from
$46.49
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Popular 1960 Mercury Monterey Steering and Chassis Parts Categories
1960 Mercury Monterey Steering and Chassis Parts
You count on your 1960 Mercury Monterey to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 40 Steering and Chassis Parts ranging in price from $9.29 to $301.99, you’re sure to find everything you need for your 1960 Mercury Monterey.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 11 different brands like Imperial, Cardone, and DriveWorks. 1960 Mercury Monterey Steering and Chassis Parts start as low as $9.29!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 765 extensive product reviews on 1960 Mercury Monterey Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Control Valve Complete Rebuild Kit with 2.0 stars and Power Cylinder Complete Rebuild Kit with 1.5 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1960 Mercury Monterey below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1960 Mercury Monterey
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1960 Mercury Monterey running right for years to come. In our inventory you’ll find brands like Imperial, Cardone, DriveWorks, and even more.
Popular Cardone Steering and Chassis Parts
You’ll find popular Cardone brand products across Power Steering Parts. All are waiting to get your 1960 Mercury Monterey back on the road. Some of the top-rated Cardone products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1960 Mercury Monterey, and some of our most reviewed Imperial parts include:
FAQs for 1960 Mercury Monterey Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1960 Mercury Monterey?
Out of 40 Steering and Chassis Parts for the 1960 Mercury Monterey, the most popular in our inventory are:
What are the top-rated 1960 Mercury Monterey Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1960 Mercury Monterey based on customer reviews/ratings are:
from
$95.99
(3)
Control Valve Complete Rebuild Kit
“All seals fit my 97 Lumina without any issues and it’s been two months now without any leaks so I’m happy.
The only thing I might complain about is t”
from
$46.49
(2)
Power Cylinder Complete Rebuild Kit
“This looked to be a universal kit with many extra parts and no instructions”
