1958 Ford Squire Steering and Chassis Parts
More 1958 Ford Squire Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1958 Ford Squire, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1958 Ford Squire Steering and Chassis Parts
Rare Parts – Tie Rod End (Part No.RP25541)
from
$28.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Driveworks – Tie Rod End (Part No.DW-ES416L)
from
$18.29
Tie Rod End
Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)
from
$21.49
Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response and du
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)
from
$34.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
Imperial – Mounting Kit System (Part No.226201)
from
$11.49
Product Features:
See More
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Atermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Rare Parts – Tie Rod Sleeve (Part No.RP25522)
from
$21.79
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with clamps
- Used to set Toe in or out
- replaces rusted or corroded sleeves
- Used to connect inner and outer tie rod ends
Rare Parts – Idler Arm Repair Kit (Part No.RP20321)
from
$471.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Repairs worn components
- Reduces vibration
- Reduces tire wear
Rare Parts – Idler Arm (Part No.RP20294)
from
$375.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Increased forging size
- Precision machining tolerances
- Heat treated components
- Low friction
Lares – New Power Steering Control Valve (Part No.10002)
from
$762.99
New Power Steering Control Valves are engineered to OE specifications. Each units is tested and balanced and ball joints lubricated with a high quality grease, ready for installation. All units are carefully packaged to insure safe arrival at your door.
See More
Rare Parts – Idler Arm Bushing (Part No.RP15309)
from
$23.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves steering response
- Reduces wander
- Reduces vibration
- Improves steering response
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Lares – New Power Steering Cylinder (Part No.10032)
from
$357.99
New Power Steering Control Cylinders are engineered to OE specifications. Each unit is hydraulically tested and ball joints lubricated with a high quality grease. All units are carefully packaged to insure safe arrival at your door.
See More
Lares – Remanufactured Power Steering Cylinder (Part No.34)
from
$286.99
Power Steering Cylinders are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All units have new chrome shafts. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.
See More
Lares – New Power Steering Cylinder (Part No.10033)
from
$347.99
New Power Steering Control Cylinders are engineered to OE specifications. Each unit is hydraulically tested and ball joints lubricated with a high quality grease. All units are carefully packaged to insure safe arrival at your door.
See More
Lares – New Power Steering Cylinder (Part No.10034)
from
$347.99
New Power Steering Control Cylinders are engineered to OE specifications. Each unit is hydraulically tested and ball joints lubricated with a high quality grease. All units are carefully packaged to insure safe arrival at your door.
See More
Rare Parts – Ball Joint (Part No.RP10100)
from
$147.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Rare Parts – Ball Joint (Part No.RP10112)
from
$156.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Rare Parts – Ball Joint (Part No.RP10101)
from
$249.99
Rare Parts prides itself in only manufacturing high quality chassis parts. Diamond Series parts will exceed OEM and aftermarket products. Examples would be: forged verses stamped housings, greaseable, tighter machining tolerances, and proper heat treat of ball studs and mating components. Every Diamond Series part is tested and inspected in our facility prior to being sold. So rest assured you are getting a quality part when quality counts.
Product Features:
See More
Product Features:
- Full Ball Stud Pitman Arm end
- Greaseable
- Self aligning no bind design
- Low friction
Imperial – Quick Connect Coupler (Part No.240250)
from
$11.49
Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.
Product Features:
See More
Product Features:
- Quick Connect coupler
- Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
- Simplifies transmission cooler installation
- Allows for auxiliary transmission cooler installation without cutting OE lines
Imperial – Transmission Oil Cooler Hose (Part No.248001)
from
$32.49
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Transmission oil cooler hose
- 11/32″ x 4-1/2′
- Designed for transmission fluid applications
- Made for tight-radius applications found in transmission cooler installations
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
- Compatible with 11/32 in. OEM cooler systems
- Tube made of black chemigum (nitrile)
- Reinforced with 2-spiral synthetic
- Covered in black Hypalon
Popular 1958 Ford Squire Steering and Chassis Parts Categories
1958 Ford Squire Steering and Chassis Parts
You count on your 1958 Ford Squire to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 21 Steering and Chassis Parts ranging in price from $11.49 to $762.99, you’re sure to find everything you need for your 1958 Ford Squire.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 8 different brands like Imperial, Driveworks, and Moog. 1958 Ford Squire Steering and Chassis Parts start as low as $11.49!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 260 extensive product reviews on 1958 Ford Squire Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Transmission Oil Cooler Reinstallation Kit with 2.3 stars and Transmission Oil Cooler Replacement Hose with 3.0 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1958 Ford Squire below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1958 Ford Squire
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 Ford Squire running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Moog, and even more.
Popular MOOG Steering and Chassis Parts
You’ll find popular MOOG brand products across Tie Rods. All are waiting to get your 1958 Ford Squire back on the road. Some of the top-rated MOOG products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 1958 Ford Squire, and some of our most reviewed Imperial parts include:
FAQs for 1958 Ford Squire Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1958 Ford Squire?
Out of 21 Steering and Chassis Parts for the 1958 Ford Squire, the most popular in our inventory are:
What are the top-rated 1958 Ford Squire Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 1958 Ford Squire based on customer reviews/ratings are:
from
$20.79
(4)
Transmission Oil Cooler Reinstallation Kit
“They did not actually ahve teh kit when i got this so the erverice rep just made teh order up from bits off the shelf. The clips and hose was all the ”
from
$14.49
(1)
Transmission Oil Cooler Replacement Hose
“This looks to be a well made hose and has Gates stamped on the hose itself. In general, I prefer Gates branded hoses.
11/32″ is an odd size hose. Th”
