1958 Ford Fairlane Drivetrains
More 1958 Ford Fairlane Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1958 Ford Fairlane, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1958 Ford Fairlane Drivetrains
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Trac Loc Spring For Ford 9" & 8" (Part No.33518)
Richmond Gear – RngPnn (Part No.79-0019-1)
from
$587.99
RngPnn
Powertrax – Lock Right Locker (Part No.1810-LR)
from
$339.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Trac Loc Clutch Guide For 9" Ford (Part No.33250)
from
$4.99
Trac Loc clutch guide for 9″ Ford.
Product Features:
See More
Product Features:
- Clutch guide
- Fits Ford 8″ and 9″
Motive Gear – Differential Spool (Part No.FS9-28LW)
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)
from
$8.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – Differential Pinion Yoke Assembly (Part No.697-530)
from
$135.99
Worn or damaged differential end yoke causing driveline vibrations? This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Crush Sleeve Eliminator Kit For Ford 9" (Part No.55041)
from
$68.99
9″ Ford 2 piece solid preload pinion spacer, Daytona or standard.
Product Features:
See More
Product Features:
- Crush sleeve eliminator kit for Ford 9″ with 28 spline pinion
Yukon Gear – Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes (Part No.33468)
from
$21.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits small bearing applications
- 3/8″ bolt holes
- 3 5/16″ x 2″ bolt pattern
Motive Gear – Nodular Differential Housing (Part No.26306)
Yukon Gear – Adjuster Lock Bolt 3.062" & 3.250" Ford 9" Drop Out (Part No.32149)
from
$3.99
Adjuster lock bolt 3.062″ & 3.250″ Yukon Ford 9″ Drop Out.
Product Features:
See More
Product Features:
- Side adjuster lock bolt
Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33043)
from
$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt, 1.0″ long, Ford.
Product Features:
See More
Product Features:
- Ring gear bolt for Ford 8″ and 9″
- For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
- 1.0″ long
National – Shaft Repair Sleeve (Part No.99112)
from
$36.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Pinion Seal For ’61-’85 9" Ford (Part No.30137)
from
$17.99
Pinion seal for ’61-’85 9″ Ford. 3″ OD.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits 1961-1985 Ford 9″
- 3.00″ O.D.
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (sold by each) (Part No.618-013)
from
$1.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)
from
$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
Yukon Gear – Short Cross Pin Shaft Without Block For 9" Ford (Part No.33335)
from
$11.99
Short cross pin shaft without block for 9″ Ford.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Ford 9″
- Short design
Yukon Gear – Pinion Nut (Part No.33154)
from
$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.
Product Features:
See More
Product Features:
- Pinion nut for Ford 7.5″, 8″ and 9″
- 3/4″ x 20 thread
- 1 1/6″ socket
Yukon Gear – Pinion Install Kit For Ford 8" Differential (Part No.13040)
from
$229.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 8″
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Product Features:
See More
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Motive Gear – Differential Pinion Shaft (Part No.B7AZ4211A)
Yukon Gear – Master Overhaul Kit For Ford Daytona 9" Lm603011 Differential With Crush Sleeve Eliminator (Part No.14158)
from
$355.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses carrier bearings & races with an I.D. of 1.780″ and an O.D. of 3.062″. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM603011 carrier race and Daytona pinion support
- Included are Timken bearings and races, pinion bearings and races, pilot bearing, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve eliminator , thread locker, marking compound with brush, and gasket.
Yukon Gear – 8" Ford O-Ring (Part No.30027)
Driveworks – Taper Bearing Cup (Part No.S-M-88010)
from
$5.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Popular 1958 Ford Fairlane Drivetrains Categories
1958 Ford Fairlane Drivetrains
You count on your 1958 Ford Fairlane to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 339 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1958 Ford Fairlane.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 13 different brands like Moog, National, and DriveWorks. 1958 Ford Fairlane Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,503 extensive product reviews on 1958 Ford Fairlane Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1958 Ford Fairlane below to get started!
Top-Rated Drivetrains Brands For Your 1958 Ford Fairlane
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1958 Ford Fairlane running right for years to come. In our inventory you’ll find brands like Moog, National, DriveWorks, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1958 Ford Fairlane back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1958 Ford Fairlane, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1958 Ford Fairlane Drivetrains
What are the most purchased Drivetrains for the 1958 Ford Fairlane?
Out of 339 Drivetrains for the 1958 Ford Fairlane, the most popular in our inventory are:
What are the top-rated 1958 Ford Fairlane Drivetrains?
Top-rated Drivetrains for your 1958 Ford Fairlane based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
