1958 Ford F-250 Engine Cooling Parts
More 1958 Ford F-250 Engine Cooling Parts
Find your specific 1958 Ford F-250 original or aftermarket Engine Cooling Parts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1958 Ford F-250 Engine Cooling Parts
Carquest Premium – New Premium Water Pump (Part No.T3078)
from
$55.99
This premium water pump uses new high-quality components and is designed to meet or exceed OE specifications. This pump is 100% tested to ensure quality. Bearings, gaskets, seals, impeller, hub and housing are all designed for long-lasting service life. A
Product Features:
See More
Product Features:
- This pump is used on accessory belt driven applications
- Used mostly on models equipped with a fan clutch
- It is highly recommended that the fan clutch be replaced with the water pump
- All gaskets or seals necessary for installation are supplied with pump
- Durable housing features precisely machined mounting surfaces for proper sealing
Motorcraft – Water Pump (Part No.G3000306205MTR)
from
$72.77
Motorcraft gas and diesel engine water pumps contain a precision bearing to help deliver a long and efficient performance. Additionally, stamped or cast impellers meet OE pumping requirements.
Product Features:
See More
Product Features:
- Seal designs use sintered metal or ceramic seats
- Strong cast-iron or aluminum die-cast housings
- Bearing housing meets OE load requirements
- Precision-ground bearings
- Hubs located for proper belt alignment
- Includes installation gasket
Edelbrock – Water Pump for Small-Block Ford 351W in Polished Finish (Part No.8848)
from
$436.99
Maximum cooling for street and racing engines. Internal passages are balanced for maximum flow. Impeller is larger than others for maximum pressure. Impeller vanes dramatically increase flow rates. Equal distribution to both sides of block. Only flows in one direction for optimum efficiency. In the early days of the automotive performance industry, you either ran what was available, or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.
Product Features:
See More
Product Features:
- Maximum Cooling for Street and Racing Engines
- Internal Passages Are Balanced for Maximum Flow
- Impeller is Larger than Others For Max Pressure
- Impeller Vanes Dramatically Increase Flow Rates
- Equal Distribution to Both Sides of Block
- Only Flows in One-Direction for Optimum Efficiency
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Felpro – Engine Coolant Outlet Gasket (Part No.35440)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Felpro – Engine Coolant Outlet Gasket (Part No.35067)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Felpro – Engine Coolant Outlet Gasket (Part No.35041)
from
$4.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design
- Manufactured for the sealing repair environment
- Validated for fit, form, and function
- Quality that you can trust
Imperial – Thermostatic Fan Control – Adjustable (Part No.226208)
from
$62.99
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160°F – 210°F thread-in probe
- For use with Imperial electric fans
- Thread-in probe for installation in water jacket or radiator
Imperial – Adjustable Thermostatic Fan Control (Part No.226204)
from
$55.99
Adjustable Thermostatic Fan Control. 160-210°F; push-in probe. Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Adjustable thermostatic fan control
- 160-210°F push-in probe
- For use with Imperial electric fans
- Probe installs into radiator fins
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$38.49
Controls the operating temperature of Imperial electric fans. Operates up to 2 fans.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185°F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
Motorcraft – Original Equipment Radiator Cap (Part No.G1010415176MTR)
from
$11.73
The Motorcraft Original Equipment Radiator Cap is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- Standard and safety vent radiator pressure caps available
- Extensive coverage for most cars and trucks, as well as farm and construction equipment
- Swivel-seal radiator caps are designed to provide increased durability and can be removed without damage to the rubber atmospheric seal
- Zinc-plated to resist corrosion and rust
- Pressure valve springs are made of stainless steel to maintain calibrated pressure throughout the service life
- Rubber pressure valve gasket resists high temperatures and deterioration from coolant and additives
- Pressure and vacuum relief features help extend radiator and hose life
- Prevent accidental cap removal with positive low-pressure stop feature
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 13 PSI (Part No.10329)
from
$10.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Imperial – Electric Fan – 12" Diameter (Part No.226112)
from
$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.
Product Features:
See More
Product Features:
- Rapid-Cool® Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
Flex A Lite – 27 in. Electric Fan (Part No.295)
from
$569.99
27 in. Electric Fan
Flex A Lite – Trimline Straight Blade Electric Fan (Part No.116)
from
$119.99
Trimline Straight Blade Electric Fan
Imperial – Electric Fan – 14" Diameter (Part No.226114)
from
$99.99
Product Features:
See More
- Motors built and tested to quality specifications
- 14 in. universal fit reversible fan
- 1250 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – Temperature Sender With Gauge and Thread Sealant (Part No.WTC1037)
from
$15.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1168)
from
$7.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1094)
from
$5.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Forecast – Water Temperature Se (Part No.P4036412151FOR)
from
$16.92
Water Temperature Se
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13778)
from
$15.79
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Standard Thermostat: 180 Degrees (Part No.244-180)
from
$6.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad – Standard Thermostat:: 192 Degrees (Part No.244-192)
from
$5.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – High Flow Thermostat: 170 Degrees (Part No.13967)
from
$14.29
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. With the enlarged Orpheus opening, this high flowing thermostat will allow for more gallons per second to flow. This will allow for the engine to cool down at a faster rate compared to the OE to allow for quick and precise cooling for your engine. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- Larger opening for increased coolant flow
- Increased strength and durability
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13468)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13478)
from
$10.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Mr. Gasket – High Performance Thermostat – 160 Degree Brass & Copper (Part No.4363)
from
$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Product Features:
See More
Product Features:
- Opens at 160 Degrees
- Designed to Resist Large Variations of Coolant Pressure at High RPM
- Fully opens at Correct Temperature Consistently Regardless of engine RPM
- For High Performance Street, Drag Race, and Oval Track
- Copper & Brass Construction – Resists Corrosion
- High Flow
Popular 1958 Ford F-250 Engine Cooling Parts Categories
1958 Ford F-250 Engine Cooling Parts
Maybe you’re in the middle of a full rebuild of that 1958 Ford F-250. Maybe you just need a couple of Engine Cooling Parts. Either way, Advance Auto Parts has 21 different Engine Cooling Parts in our inventory ranging from $1.99 to $99.99. That means you can find the exact parts or products you need to keep that 1958 Ford F-250 running smoothly.
Engine Cooling Parts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1958 Ford F-250. Imperial, Carquest Premium, and Mr. Gasket are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Engine Cooling Parts for your 1958 Ford F-250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 511 reviews in this category, some of the top rated parts include Thermocap Radiator Cap with 3.2 stars and Radiator Cap: 7 PSI with 4.8 stars.
So if you’re in the market for aftermarket Engine Cooling Parts to keep your 1958 Ford F-250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Engine Cooling Parts Brands To Make Your 1958 Ford F-250 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1958 Ford F-250 demands trusted brand parts and products to keep it running. Many trusted brands of Engine Cooling Parts make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 the best it can be. Be sure to browse some of our top Engine Cooling Parts brands and parts.
Popular Felpro Engine Cooling Parts
We carry Felpro parts in our stock across Thermostat and Water Outlet Gaskets categories, plus more. For a 1958 Ford F-250, our most popular Felpro Engine Cooling Parts include:
Top 1958 Ford F-250 Engine Cooling Parts from Imperial
Imperial products are another trusted brand when it comes to Engine Cooling Parts for your 1958 Ford F-250. Popular Imperial parts include:
FAQs for 1958 Ford F-250 Engine Cooling Parts
What are the most purchased Engine Cooling Parts for the 1958 Ford F-250?
Out of 21 Engine Cooling Parts for the 1958 Ford F-250, the most popular in our inventory are:
What are the top-rated 1958 Ford F-250 Engine Cooling Parts?
Top-rated Engine Cooling Parts for your 1958 Ford F-250 based on customer reviews/ratings are:
from
$47.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”
from
$6.29
(8)
Radiator Cap: 7 PSI
“This is a lower PSI cap for a V10 – fits just like the factory 16psi cap.”
from
$38.49
(8)
Thermostatic Fan Control – Preset
“I’ve been using this kit for several years on my off road truck. It’s hooked up to a powerful flex-a-lite fan and handles the load with ease. I have”
