1957 Pontiac Bonneville Performance and Racing Products
More 1957 Pontiac Bonneville Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1957 Pontiac Bonneville, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1957 Pontiac Bonneville Performance and Racing Products
PerTronix – D4062 Flame-Thrower HEI Distributor Rotor Blue (Part No.D4062)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4062 Flame-Thrower HEI Distributor Rotor Blue
- Made from hi-performance 60 KV rated alkyd molding compound.
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
- Made from hi-performance 60 KV rated alkyd molding compound.
Mallory – Distributor Drive Gear (Part No.29434)
from
$103.99
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.
Product Features:
See More
Product Features:
- Replacement Distributor Gear
Accel – High Performance Contact Set 32 Oz (Part No.110128)
from
$46.99
ACCEL high-performance 32 ounce points resist point float up to 6,500 RPM. Extra-thick contact arms prevent flexing. Large tungsten contacts provide crisp circuit-breaking for peak coil output. Phenolic rubbing blocks endure heavy spring loads.
Product Features:
See More
Product Features:
- Extra Thick Contact Arms
- Large Radius Tungsten Contacts
- High Strength Phenolic Rubbing Blocks
- Prevents Points Float
- Moisture-Proof Buna-N Condenser
Accel – Contact And Condenser Kit (Part No.8104)
from
$56.99
Regain horsepower and economy for your street machine with new contact and condenser kit. Large tungsten contacts provide crisp coil firing and perform solidly up to 5,000 RPM. Condenser’s special winding protects from pitting of point contacts. Heavy duty 23 ounce points.
Product Features:
See More
Product Features:
- High Performance Points and Condenser
- With Integral Conductor
Mallory – Kit (Part No.401)
from
$14.99
Kit
Accel – Points Eliminator Kit (Part No.2010)
from
$98.99
Put an end to high maintenance points ignition systems by installing an ACCEL points eliminator ignition conversion kit. By utilizing specialized electronic circuitry and an infrared signal, ignition timing is stable from 1 to 10,000 RPM. More accurate ignition timing than any other type of system. Improves performance and fuel efficiency. Easy to install with simple hand tools. Reduced maintenance-eliminates changing points forever. Latest thermal clad based surface mount construction for maximum dependability and long life. Available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- More Accurate Ignition Timing
- Improves Performance And Fuel Economy
- Provides More Accurate Ignition Timing
- Easy To Install w/Hand Tools
- Reduced Maintenance
- Thermal Clad Based Surface Mount Construction
- Utilizes Specialized Electronic Circuitry
- Ignition Timing Is Stable From 1 To 10000rpm
Mr. Gasket – Throttle Cable Bracket (Part No.9885)
from
$14.99
The throttle cable bracket is designed for small block Chevy engines thru 1979 and is to be used in conjunction with the kick down cable Pn9886 for the Turbo 350 transmission. The throttle cable bracket mounts on the intake manifold and will hold cables with round or square mounts. It has a 2 inch adjustable range and is finished off in a beautiful chrome plating.
Product Features:
See More
Product Features:
- 2 in. adjustable range
- Includes necessary hardware
- Chrome plated
- Individually packaged
Mr. Gasket – Thermocap Radiator Cap (Part No.2470S)
from
$54.99
Knowing your coolant temperature can help to prevent burn injuries. Thermo Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermo Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Check the Thermo Cap temperature indicator to determine if the coolant is cool enough to make removing Thermo Cap safe. If the coolant is very hot, then thoroughly rinse the radiator with cool water, until the coolant temperature drops into a cooler safe zone Thermo Cap’s integrated coolant reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree Fahrenheit temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges. Chromed crown with a colored trim ring. Indicates coolant temperature, Helps to prevent coolant injuries, integrated coolant reclamation valve, Improves under hood appearance, Fits most domestic or import vehicles and various valve pressures available.
Product Features:
See More
Product Features:
- Indicates coolant temperature
- Helps to prevent coolant injuries
- Integrated coolant reclamation valve
- Improves under hood appearance
- Fits most domestic vehicles
- Built in calibrated thermometer
Mr. Gasket – Radiator Cap (Part No.2481)
from
$16.99
Cap off your radiator with a gleaming chrome plated filler cap. Made to last.
Product Features:
See More
Product Features:
- Chrome radiator caps
- Made to last
- Skin packaged
Mallory – Distributor Wiring Harness (Part No.29349)
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Edelbrock – VALVE COVERS (Part No.4249)
from
$117.99
Product Features:
See More
- Polished Finish
- Raised Fins w/Black Mat Background
- Detailed With Allen Hex Heads
- 2 Piece Look; 1 Piece Construction
- Clears Most Roller Rockers
- Clears Valvetrain Components
- Heavy Gauge
Edelbrock – Signature Series Valve Covers: Pontiac 301-455,V8, Short, Chrome Steel (Part No.4456)
from
$85.99
The Edelbrock #4456 Signature Series Valve Covers are designed for Pontiac 301-326-350-389-400-421-455 V8 – ’62-79 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.
Product Features:
See More
Product Features:
- Pontiac 301-455, V8
- Short
- Chrome Steel
- Set Of Two
- Rubber Grommets For Breather
Mr. Gasket – Valve Cover (Part No.9805)
from
$81.99
Chrome plated steel valve covers have a flat smooth top. Available for numerous applications.
Product Features:
See More
Product Features:
- Flat/smooth top
- Designed to hold valve cover gasket in position
- Made from grade 5 steel
- Long lasting durability
- Cadmium plated to resist corrosion
- Easy installation
Mr. Gasket – Aluminum Valve Cover (Part No.6854)
from
$159.99
Mr. Gasket’s aluminum valve covers are precision die cast for light weight and a perfect fit. Beautifully polished to a high luster, they are sure to enhance the appearance of any engine compartment. They feature an extended sealing lip to positively locate and secure the gasket and stop it from moving to eliminate oil leaks. Available with plain or ball- milled tops and include a 1 1/4 inch diameter breather hole, except where noted. Packaged two per set.
Product Features:
See More
Product Features:
- 0.125 in. Thick
- Lightweight
- Precision Die Cast
- Extended Sealing Lip
- Stops Gasket From Moving
- A Perfect Fit
- Beautifully Polished To A High Luster
Spectre – Valve Cover (Part No.5218)
from
$44.99
Available in various sizes, heights, and finishes, Spectre offers a wide variety of high performance valve covers designed to easily replace your stock covers. Designed for 1958-1986 Chevrolet Small Block 265-400 engines, this valve cover features chrome-plated steel construction and a flamed design. Sold in pairs, this stock profile cover is baffled to provide optimum function. With show quality construction and a sealing edge designed for an ideal fit, our valve covers are engineered to look great for applications ranging from custom builds to replacing stock equipment.
Product Features:
See More
Product Features:
- Designed for 1958-1986 Chevrolet Small Block 265-400 engines
- Baffled for breather system compatibility
- Sold in pairs
- Triple chrome-plated steel construction
- Stock height
- Features OEM style sealing edge
Mr. Gasket – Side Mount Alternator Bracket (Part No.9852)
from
$22.99
Side mount header bracket. Made from heavy gauge chrome plated steel, these brackets are used to mount the alternator on small block Chevy applications.
Product Features:
See More
Product Features:
- Heavy gauge
- Chrome plated steel
Hypertech – Power Coil Kit for GM HEI Systems with Clamp Down Cap (Part No.4050)
from
$95.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.
Product Features:
See More
Product Features:
- High Output Voltage
- More Spark Energy
- Up To 7000 RPMs
- No Drop Off In Power As RPMs Increase
- Wider Plug Gaps; Brass Terminals
- Constructed w/Burn Through Resistant Materials
- Excellent Dielectric Strength
- Resists Carbon Tracking
- Product might not be available in all states due to local laws.
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)
from
$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Accel – Super Coil (Part No.140005)
from
$95.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-32
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Super DIS Coil (Part No.140017)
from
$61.99
ACCEL offers the only true high-performance. AC Delco style DIS coil. Advanced bobbin technology, specialized magnetic steel core and optimum windings result in higher energy and voltage outputs plus arc duration. Direct bolt and plug in installation.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-39
- MSD 8224
Popular 1957 Pontiac Bonneville Performance and Racing Products Categories
1957 Pontiac Bonneville Performance and Racing Products
You count on your 1957 Pontiac Bonneville to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 12 Performance and Racing Products ranging in price from $14.99 to $113.99, you’re sure to find everything you need for your 1957 Pontiac Bonneville.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 4 different brands like Accel, Mr. Gasket, and PerTronix. 1957 Pontiac Bonneville Performance and Racing Products start as low as $14.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 57 extensive product reviews on 1957 Pontiac Bonneville Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Unilite Breakerless Ignition Conversion Kit with 5.0 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1957 Pontiac Bonneville below to get started!
Top-Rated Performance and Racing Products Brands For Your 1957 Pontiac Bonneville
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Pontiac Bonneville running right for years to come. In our inventory you’ll find brands like Accel, Mr. Gasket, PerTronix, and even more.
Popular Mr. Gasket Performance and Racing Products
You’ll find popular Mr. Gasket brand products across Performance Radiators. All are waiting to get your 1957 Pontiac Bonneville back on the road. Some of the top-rated Mr. Gasket products in these categories are:
Top-Rated Accel Performance and Racing Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1957 Pontiac Bonneville, and some of our most reviewed Accel parts include:
FAQs for 1957 Pontiac Bonneville Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1957 Pontiac Bonneville?
Out of 12 Performance and Racing Products for the 1957 Pontiac Bonneville, the most popular in our inventory are:
from
$22.99
This product is not rated
Side Mount Alternator Bracket
Performance Exhaust Header Hardware
What are the top-rated 1957 Pontiac Bonneville Performance and Racing Products?
Top-rated Performance and Racing Products for your 1957 Pontiac Bonneville based on customer reviews/ratings are:
from
$113.99
(1)
Unilite Breakerless Ignition Conversion Kit
“I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”
