1957 Ford Fairlane Drivetrains
More 1957 Ford Fairlane Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1957 Ford Fairlane, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1957 Ford Fairlane Drivetrains
Yukon Gear – Mini Spool For Ford 9" With 28 Spline Axles (Part No.32056)
from
$59.99
Mini Spool 8″ and 9″ for Ford with 28 spline axles. Cross is bored for three cross pins. Mini spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier and give 100% power to both tires at all times. These units are not recommended for street-driven vehicles. We recommend full spools for vehicles with large tires or high horsepower. These units come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 28 spline axles
- Installs into a standard open carrier case
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Pinion Install Kit For Ford 9" Differential, 28 Spline, Oversize (Part No.13052)
from
$409.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ with oversize Daytona pinion support
- 28 spline
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.49
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Dorman – Spindle Washer – I.D. 13/16 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-013.1)
from
$4.29
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1310 And 1330 U/Bolt Kit (2 U-Bolts And 4 Nuts) For 9" Ford (Part No.41112)
from
$18.99
1310 and 1330 U/bolt kit (2 U-bolts and 4 nuts) for 9″ Ford.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits Ford 9″
- 1310 and 1330 u-joint size
- Includes two u-bolts and four nuts
Powertrax – Grip LOK Traction System (Part No.LK109028)
from
$668.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.SS9)
from
$45.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
Motive Gear – Nodular Differential Housing (Part No.26325)
Yukon Gear – Side Gear With Hub For 9" Ford With 31 Splines (Part No.16161)
from
$47.99
Side gear with hub for 9″ Ford with 31 splines.
Product Features:
See More
Product Features:
- Side gear with hub
- Fits Ford 8″ and 9″ standard open differential and Trac Loc positraction with 31 spline axles
Motive Gear – Performance Differential Ring and Pinion (Part No.F890537AX)
Yukon Gear – Model 20 & Model 35 Axle Stud 1/2"-20 X 1.625" Length, 0.620" Dia – Knurl (Part No.33181)
from
$5.99
Model 20 & Model 35 axle stud 0.620″ Dia. Shank.
Product Features:
See More
Product Features:
- Axle stud for AMC Model 20 and Model 35
- 1/2″ x 20 thread
- 0.620″ knurl diameter
- 1.625″ long
Yukon Gear – Pinion Gear And Thrust Washer For 8" And 9" Ford, Model 20, And 7.25" Chrysler (Part No.33301)
from
$4.99
Pinion gear thrust washer for 8″ and 9″ Ford, Model 20, and 7.25″ Chrysler.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Ford 8″, Ford 9″ and Chrysler 7.25″
Motive Gear – Differential Pinion Shaft (Part No.B7AZ4211A)
Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-102910)
from
$8.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Short Cross Pin Shaft Without Block For 9" Ford (Part No.33335)
from
$11.99
Short cross pin shaft without block for 9″ Ford.
Product Features:
See More
Product Features:
- Cross pin shaft
- Fits Ford 9″
- Short design
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)
from
$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fill plug
- Fits Ford 9″
National – Shaft Repair Sleeve (Part No.99106)
from
$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – 8" Dropout Housing Gasket (Part No.23010)
National – Bearings (Part No.R-1535-TAV)
from
$41.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- High radial load capacity makes them suitable for high speed applications
- Industry leading coverage
- Professional technicians know they can depend on National
USA Standard Gear – Master Overhaul Kit for the Ford 9" LM603011 Differential with Daytona Pinion Support (Part No.37038)
from
$274.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Ford 9″ with LM603011 carrier races and Daytona pinion support
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, pilot bearing, thread locker, marking compound with brush and gasket.
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Motive Gear – Differential Mini Spool (Part No.MS9-31)
Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)
Yukon Gear – 1310 Lifetime U/Joint (Part No.42003)
from
$57.99
1310 Yukon Lifetime U/joint. 1.718″ snap ring span, 1.062″ cap diameter. Inside snap ring.
See More
Popular 1957 Ford Fairlane Drivetrains Categories
1957 Ford Fairlane Drivetrains
You count on your 1957 Ford Fairlane to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 336 Drivetrains ranging in price from $1.99 to $1,211.99, you’re sure to find everything you need for your 1957 Ford Fairlane.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 12 different brands like Moog, National, and DriveWorks. 1957 Ford Fairlane Drivetrains start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,003 extensive product reviews on 1957 Ford Fairlane Drivetrains. Some of the top-rated Drivetrains products we carry are Bearings with 5.0 stars and Bearings with 4.8 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1957 Ford Fairlane below to get started!
Top-Rated Drivetrains Brands For Your 1957 Ford Fairlane
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1957 Ford Fairlane running right for years to come. In our inventory you’ll find brands like Moog, National, DriveWorks, and even more.
Popular Felpro Drivetrains
You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1957 Ford Fairlane back on the road. Some of the top-rated Felpro products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1957 Ford Fairlane, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1957 Ford Fairlane Drivetrains
What are the most purchased Drivetrains for the 1957 Ford Fairlane?
Out of 336 Drivetrains for the 1957 Ford Fairlane, the most popular in our inventory are:
What are the top-rated 1957 Ford Fairlane Drivetrains?
Top-rated Drivetrains for your 1957 Ford Fairlane based on customer reviews/ratings are:
from
$10.49
(4)
Bearings
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
