1954 Ford F-100 Drivetrains
More 1954 Ford F-100 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1954 Ford F-100, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1954 Ford F-100 Drivetrains
Yukon Gear – Replacement Cross Pin Shaft For Dana 44, Standard Open (Part No.33318)
from
$16.99
Product Features:
See More
- Cross pin shaft for Dana Spicer 44
- Fits standard open differentials only
Yukon Gear – Pinion Install Kit For Dana 44 Differential, 19 Spline (Part No.13021)
from
$257.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 19 spline axles
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Pinion Nut (Part No.33154)
from
$7.99
Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.
Product Features:
See More
Product Features:
- Pinion nut for Ford 7.5″, 8″ and 9″
- 3/4″ x 20 thread
- 1 1/6″ socket
Driveworks – Taper Bearing Cup (Part No.S-HM-88610)
from
$6.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.207-L)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Powertrax – Grip LOK Traction System (Part No.LK109028)
from
$668.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Dorman – Help – U-Joint Bolt Kit (Part No.81004)
from
$6.29
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Oil Seal (Part No.S-5778)
from
$10.49
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – Standard Open Spider Gear Kit For 9" Ford With 31 Spline Axles And 4-Pinion Design (Part No.16034)
from
$317.99
Yukon standard open spider gear kit for 9″ Ford with 31 spline axles and 4-pinion design. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 9″ open differential with 31 spline axles
- Includes two side gears, four pinion gears, cross pin shaft, roll pins and spider gear thrust washers.
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Yukon Gear – Lightweight Steel Spool For Ford 9" With 31 Spline Axles (Part No.32046)
from
$313.99
Yukon Performance 2-1/8″ deck lightweight steel spool for 9″ Ford with 31 spline axles. Spool uses 1.785″ journal bearings. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 31 spline axles
- Lightweight design
- Provides 100% traction to both wheels at all times
- Not recommended for street driven vehicles
Yukon Gear – Drive Flange Cap For Dana 44 (Part No.32134)
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
Yukon Gear – Powr Lok Flat Driven Plate For Dana 44 (Part No.16173)
National – Bearings (Part No.LM102910)
from
$6.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Yukon Gear – Dropout Housing Stud For Ford 8" & 9" (Part No.32338)
Motive Gear – Ring Gear Bolt (Part No.D8OZ4216B)
Yukon Gear – Set Up Bearing (Part No.56037)
from
$189.99
Set-up carrier bearing (2 bearings, no races) 25590. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 44
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Motive Gear – Differential Ring and Pinion (Part No.D44-354)
Yukon Gear – Steel Cover For Dana 44 Standard Rotation (Part No.32319)
Yukon Gear – Dana 44, Ford 8" / 9", And Model 20 Side Gear Thrust Washer Replacement (Part No.33283)
from
$5.99
Product Features:
See More
- Side gear thrust washer for Ford 8″, Ford 9″ and AMC Model 20
- 0.030″ thick
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
National – Bearings (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Felpro – Axle Housing Cover Gasket (Part No.RDS 6629)
from
$6.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Dorman – Ring and Pinion Bearing Installation Kit (Part No.697-109)
from
$227.99
This differential bearing kit includes all necessary installation components for a differential ring and pinion on certain vehicle years, makes and models.
Product Features:
See More
Product Features:
- Convenient kit – this ring and pinion bearing installation kit includes all necessary components for a complete repair on certain vehicle applications
- Related repair – smart to have on hand when installing a differential ring and pinion
- Durable construction – built for reliable longevity, free of defects in materials and workmanship
- Trustworthy quality – backed by team of designers and engineers in the United States
Popular 1954 Ford F-100 Drivetrains Categories
1954 Ford F-100 Drivetrains
You count on your 1954 Ford F-100 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 126 Drivetrains ranging in price from $3.99 to $1,302.99, you’re sure to find everything you need for your 1954 Ford F-100.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 7 different brands like Spicer, Yukon Gear, and National. 1954 Ford F-100 Drivetrains start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 64 extensive product reviews on 1954 Ford F-100 Drivetrains. Some of the top-rated Drivetrains products we carry are Oil Seal with 4.3 stars and Bearings with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1954 Ford F-100 below to get started!
Top-Rated Drivetrains Brands For Your 1954 Ford F-100
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1954 Ford F-100 running right for years to come. In our inventory you’ll find brands like Spicer, Yukon Gear, National, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1954 Ford F-100 back on the road. Some of the top-rated Spicer products in these categories are:
FAQs for 1954 Ford F-100 Drivetrains
What are the most purchased Drivetrains for the 1954 Ford F-100?
Out of 126 Drivetrains for the 1954 Ford F-100, the most popular in our inventory are:
from
$11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts
What are the top-rated 1954 Ford F-100 Drivetrains?
Top-rated Drivetrains for your 1954 Ford F-100 based on customer reviews/ratings are:
from
$41.99
(1)
Shaft Repair Sleeve
“Fixed my Ford F-150 4.2. Fit well and installation tool seated the sleeve exactly where it needed to be. Super easy to use and covered the grooved s”
