White WCL Parts

White WCL Belts and Hoses

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24220)

Green Stripe« 2-Ply Straight Coolant Hose

from

$1.49
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Dayco – Flex Radiator Hoses; Neoprene, Heavy Duty, 11 Inch Long, 2.25 Inch Inner Dia. (Part No.82171GL)

Flex Radiator Hoses; Neoprene, Heavy Duty, 11 Inch Long, 2.25 Inch Inner Dia.

from

$23.99
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 56.5 Long, 8 Rib Count, Heavy Duty (Part No.5080565)

Poly Rib Belt HD Serpentine Belt; 56.5 Long, 8 Rib Count, Heavy Duty

from

$46.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 41.54 Long, 8 Rib Count, Heavy Duty (Part No.5080415)

Poly Rib Belt HD Serpentine Belt; 41.54 Long, 8 Rib Count, Heavy Duty

from

$36.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – Poly Rib Belt Serpentine Belt; 34.06 Long, 5 Rib Count (Part No.5050340)

Poly Rib Belt Serpentine Belt; 34.06 Long, 5 Rib Count

from

$30.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.31" Long, 2.25" Diameter (Part No.C72139)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10.31" Long, 2.25" Diameter

from

$20.29
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.21488)

Premium Molded Coolant Hose

from

$28.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Gates – Green Stripe« 2-Ply Straight Coolant Hose (Part No.24232)

Green Stripe« 2-Ply Straight Coolant Hose

from

$2.99
Stick hose designed for demanding heavy-duty coolant/air applications. Approved for marine applications.

Product Features:
  • Cover marked in 1 in. increments to facilitate approximate cut lengths, allows ┐custom-fit” installations
  • Engineered with compounds that resist electrochemical degradation
  • Approved for marine applications
  • Exceeds SAE 20R1 Type EC (Class D-1 Tube, and cover, Standard Wall)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the inch. See store for details.
See More

Dayco – Double Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality (Part No.22570)

Double Cog V-Belt; 57 Inch Long, Exact Fit Premium Quality

from

$23.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9465)

Automotive XL« High Capacity V-Belt

from

$32.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Double Cog V-Belt; 64.5 Inch Long, Exact Fit Premium Quality (Part No.22645)

Double Cog V-Belt; 64.5 Inch Long, Exact Fit Premium Quality

from

$21.99
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  • Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  • Provides greater durability and flexibility 35% stronger than all previous versions
  • Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Driveworks – Automotive V-Belt (Part No.50017)

Automotive V-Belt

from

$4.99
The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:
  • This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
  • Polyester cords provide extreme tension-holding capability for longer belt life
  • The raw edge belt design delivers the maximum gripping power
  • The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration
See More

Gates – FLEETRUNNER BELTS (Part No.9650HD)

FLEETRUNNER BELTS

from

$47.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Heavy-Duty construction resists cracking and wear
  • Oil and heat resistant
  • Outperforms the competition on the most troublesome drives
  • Patented EPDM construction with distinct green gum back
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9540)

Automotive XL« High Capacity V-Belt

from

$34.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9425HD)

FleetRunner« Heavy-Duty V-Belt

from

$31.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9365HD)

FleetRunner« Heavy-Duty V-Belt

from

$41.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – Premium Molded Coolant Hose (Part No.21115)

Premium Molded Coolant Hose

from

$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, 2.25" Diameter (Part No.B71729)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4" Long, 2.25" Diameter

from

$15.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Premium Molded Coolant Hose (Part No.21194)

Premium Molded Coolant Hose

from

$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

White WCL Drivetrains

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2012
  • Weight approx: 1 Lbs
  • CUSHION INSERT ONLY
  • FOR COMPLETE MOUNT SEE PART 6056
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$17.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.7680 INCH / 45 MM
  • CENTERLINE: 2.75 INCH / 70 MM
  • MOUNT WIDTH: 7.62 INCH / 194 MM
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6048)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$46.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-96; DODGE 71-81; FORD 75-98; GMC 79-96; INTL 57-02; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2013
  • Weight approx: 6 Lbs
  • BEARING ID / BORE: 1.9685 INCH / 50 MM
  • CENTERLINE: 2.80 INCH / 71 MM
  • MOUNT WIDTH: 7.62 INCH / 194 MM
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6049)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$37.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-90; DODGE 78-81; FORD 75-98; GMC 79-90; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1957-2018
  • Weight approx: 8 Lbs
  • BEARING ID / BORE: 2.3622 INCH / 60 MM
  • CENTERLINE: 3.37 INCH / 86 MM
  • MOUNT WIDTH: 8.62 INCH / 219 MM
See More

White WCL Cooling and Climate Controls

Gates – Heavy-Duty Engine Water Pump (Part No.44092HD)

Heavy-Duty Engine Water Pump

from

$212.99
Gates carries a huge line of water pumps for heavy duty applications. Our heavy duty water pump offering is designed to handle rugged Fleet standards.

Product Features:
  • Our heavy-duty water pump o┐ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • New pumps manufactured to ISO/TS 16949 standards
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T5009)

Engine Water Pump: New, Gasket/Seals Included

from

$409.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Gates – Heavy-Duty Engine Water Pump (Part No.44084HD)

Heavy-Duty Engine Water Pump

from

$184.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Gates – Heavy-Duty Engine Water Pump (Part No.41173HD)

Heavy-Duty Engine Water Pump

from

$137.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Carquest Premium – Engine Water Pump Adapter (Part No.T3009)

Engine Water Pump Adapter

from

$71.99
This back plate is an all new, original equipment-quality component for proper fit and long-life performance. Each plate is precision machined for optimal impeller clearance, plus all new back plates are 100% factory tested to assure the highest quality product. Each unit is built to meet or exceed all Original Equipment specifications and is validated for fit, form, and function. Also, application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust.

Product Features:
  • This plate may become worn during normal engine operation
  • It is highly recommended that the plate be replaced at the same time as the pump
  • Machined grey iron plate
  • Creates optimized impeller clearance for maximum coolant flow
  • Follow all enclosed instructions to maximize plate life and validate warranty
See More

Gates – Heavy-Duty Engine Water Pump (Part No.41111HD)

Heavy-Duty Engine Water Pump

from

$105.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Gates – Heavy-Duty Engine Water Pump (Part No.44055HD)

Heavy-Duty Engine Water Pump

from

$200.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Gates – Heavy-Duty Engine Water Pump (Part No.45009HD)

Heavy-Duty Engine Water Pump

from

$618.99
Product Features:
  • Our heavy-duty water pump o+ering is designed to handle severe and rigorous conditions
  • 100 percent fully tested unitized bearings and seals
  • Computerized machined surfaces for proper fit and sealing
  • Gates heavy-duty water pumps are represented as a part number with an HD suffix
  • Warranty: 18 months or 150,000 miles/5,400 hours, whichever comes first
  • New pumps manufactured to ISO/TS 16949 standards
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.89197)

Coolant Spin-on with BTA PLUS Formula

from

$57.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 12 Units BTA PLUS
  • Maintenance filter for systems with 33-43 gallons capacity. Can be used with 89019 base.
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.99065)

Coolant Spin-on with BTA PLUS Formula

from

$69.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 23 Units BTA PLUS
  • Maintenance filter for systems with 52-70 gallons capacity. Can be used with 89019 base.
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.96324)

Coolant Spin-on with BTA PLUS Formula

from

$28.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 4 Units BTA PLUS
  • Maintenance filter for systems with 7-16 gallons capacity. Can be used with 89019 base.
See More

Carquest Premium – Coolant Spin-on with BTA PLUS Formula (Part No.89075)

Coolant Spin-on with BTA PLUS Formula

from

$57.99
CARQUEST HD coolant filters are designed to meet or exceed OE performance over the entire OE recommended service interval.

Product Features:
  • Standard life Spin-on coolant filter
  • Made in USA
  • Includes 15 Units BTA PLUS
  • Maintenance filter for systems with 44-51 gallons capacity. Can be used with 89019 base.
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 180 Degrees (Part No.15198)

Heavy Duty Thermostat: With Seal, 180 Degrees

from

$55.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Carquest Premium – Heavy Duty Thermostat: With Seal, 170 Degrees (Part No.15197)

Heavy Duty Thermostat: With Seal, 170 Degrees

from

$52.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

White WCL Filters and PCVs

Carquest Premium – Full-Flow Lube Spin-on (Part No.85374HD)

Full-Flow Lube Spin-on

from

$14.79
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – High Efficiency Fuel Spin-on Filter for Modern Engines (Part No.86674)

High Efficiency Fuel Spin-on Filter for Modern Engines

from

$37.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Premium Fuel Spin-on Filter for Clean Fuel and Optimal Engine Performance (Part No.86528)

Premium Fuel Spin-on Filter for Clean Fuel and Optimal Engine Performance

from

$30.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Secondary Fuel Spin-on (Part No.86815)

Secondary Fuel Spin-on

from

$48.49
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • Includes Integral Post Seal
See More

Carquest Premium – Primary Fuel Element (Part No.86360)

Primary Fuel Element

from

$14.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Primary Fuel Spin-on (Part No.86118)

Primary Fuel Spin-on

from

$20.79
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – PRIMARY FUEL ELEMENT (Part No.96308)

PRIMARY FUEL ELEMENT

from

$23.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Contains Reinforced Centertube
  • Includes Reinforced Centertube
See More

Carquest Premium – Box-style Glass Fuel/Water Separator/Coalescer (Part No.86369)

Box-style Glass Fuel/Water Separator/Coalescer

from

$65.99
Carquest’s box-style fuel filters protect sensitive fuel system components, like injection pumps and injectors, from damaging contaminants.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Box style fuel filter designed to remove particulates from diesel fuel, offering protection to the entire fuel injection system
  • Easy installation and removal
  • Made in USA
  • Often a companion to 86370.
See More

Carquest Premium – Fuel/Water Separator Element with Bail Handle (Part No.86401)

Fuel/Water Separator Element with Bail Handle

from

$99.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Fuel/Water Separator Spin-on with Drain (Part No.96064)

Fuel/Water Separator Spin-on with Drain

from

$34.99
Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Application engineered media which aids in stripping water in diesel fuels
  • Patent pending drain, metal end caps, which hold media in place
  • Rust resistant can, ensuring no leakage from inside
  • Made in USA
  • CAUTION: Furnished D-Ring must be installed on post for seal.
  • Use with 99185
See More

Carquest Premium – Maximum Performance Glass Hydraulic Element (Part No.84407)

Maximum Performance Glass Hydraulic Element

from

$113.99
CARQUEST HD hydraulic filters maintain optimal system cleanliness levels and are essential to ensuring reliability and reducing maintenance costs while meeting OE recommended service intervals.

Product Features:
  • Conventional cartridge hydraulic filter – MPG
  • Hydraulic Filter with High Performance Glass media for superior performance in removing harmful contaminants in the fluid
  • Wire backed media to withstand extreme pressures and flow rates
  • Metal end caps
  • Made in USA
See More

Carquest Premium – Full-Flow Lube Spin-on (Part No.85791)

Full-Flow Lube Spin-on

from

$27.99
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – By-Pass Lube Spin-on (Part No.85749)

By-Pass Lube Spin-on

from

$53.99
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • Can be used with 89750 base.
See More

Carquest Premium – Dual-Flow Lube Spin-on (Part No.85748)

Dual-Flow Lube Spin-on

from

$90.99
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Engine Protection Full-Flow Lube Spin-on Filter (Part No.85970)

Engine Protection Full-Flow Lube Spin-on Filter

from

$48.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • Includes Integral Post Seal
See More

Carquest Premium – Full-Flow Lube Spin-on (Part No.85671)

Full-Flow Lube Spin-on

from

$47.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • Includes Integral Post Seal
See More

Carquest Premium – Full-Flow Lube Spin-on (Part No.85792)

Full-Flow Lube Spin-on

from

$45.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – High Efficiency Lube Spin-on (Part No.84792)

High Efficiency Lube Spin-on

from

$60.99
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Full-Flow Lube Element (Part No.85133)

Full-Flow Lube Element

from

$24.29
Carquest lube filter elements protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Carquest Premium – Full-Flow Lube Spin-on (Also Used as Hydraulic or Transmission) (Part No.85515HD)

Full-Flow Lube Spin-on (Also Used as Hydraulic or Transmission)

from

$13.79
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Contains Anti-Drainback Valve;8 PSID By-Pass Valve; Front End By-Pass Valve
See More

Carquest Premium – Maximum Performance Glass Full-Flow Lube Spin-on (Part No.85970XE)

Maximum Performance Glass Full-Flow Lube Spin-on

from

$69.99
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Contains Integral Post Seal
  • Wire backed media to withstand extreme pressures and flow rates
  • Metal end caps vs paper end caps
  • Made in USA
See More

Carquest Premium – Full-Flow Lube or Hydraulic Element with Furnished Gaskets (Part No.85161)

Full-Flow Lube or Hydraulic Element with Furnished Gaskets

from

$22.29
Carquest lube filter elements protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
  • Includes Reinforced Centertube
See More

Carquest Premium – Severe Service Full-Flow Lube Spin-on (Part No.85791XD)

Severe Service Full-Flow Lube Spin-on

from

$33.49
Carquest spin-on lube filters protect your engine from wear particles that can otherwise lead to premature parts failure.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Made in USA
See More

Search Over 160 White WCL Parts Online for Delivery or Pick Up

Looking for the best White WCL aftermarket replacement parts? Replacing worn and broken parts on your White WCL? Check out our online catalog to find the best selection of aftermarket White WCL parts as well as real user reviews on White WCL replacement parts. Make an informed decision about every component you add to your WCL.

At Advance Auto, we’ve got you covered when it comes to getting your White WCL in tip top condition. We’ve got over 160 White WCL parts to choose from in popular categories like Belts and Hoses, Fuel and Emissions Systems and Drivetrains. If you’re looking for the best prices, try searching our White WCL parts catalog to compare OEM and aftermarket parts for your White WCL.

Whether you need White WCL body parts, interior components, or custom White WCL parts you can find them online at Advance Auto. Want to order your Cooling and Climate Controls online? Or maybe you need your White Filters and PCVs same day? No problem, you can pick up WCL parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used White WCL parts has never been easier.