Volvo 164 Drivetrains
Top Volvo 164 Drivetrains Categories
We carry over 125 Drivetrains in inventory for the Volvo 164. If you’re looking for aftermarket Drivetrains for your Volvo 164, check out all these categories:
Essential Volvo 164 Drivetrains
National – Shaft Repair Sleeve (Part No.99155)
from
$38.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
Yukon Gear – Set Up Bearing (Part No.56036)
from
$172.99
Set-up carrier bearing kit (2 bearings, no races) LM501349. No return.
Product Features:
See More
Product Features:
- Set up bearing kit
- Fits Dana Spicer 30
- Easily slips on and off carrier journals to allow for easier carrier shim adjustment
Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)
from
$53.99
1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
FAG – Drive Shaft Support Bearing (Part No.K1040390203FAG)
from
$45.63
FAG drive shaft support bearings are built to meet or exceed OE specifications. FAG Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Pre-Lubricated and reinforced seals
Professional Parts Sweden – Driveshaft Support Spring (Part No.K1053390161PPS)
from
$2.89
The Professional Parts Sweden Driveshaft Support Spring is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Beck/Arnley – Drive Shaft Center Support Rubber Donut (Part No.101-1725)
from
$55.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Rubber mount only
- Made from a high grade rubber compound
- Quality construction for durability
- Application specific for this vehicle
Yukon Gear – Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up (Part No.34016)
from
$1303.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- 3.73 and up ratio only
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Yukon Gear – Replacement Chrome Cover For Dana 30 Standard Rotation (Part No.32003)
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
SKF – Wheel Bearing (Part No.K8000390037SKF)
from
$75.88
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
Yukon Gear – Replacement Standard Open Carrier Case For Dana 30, 3.73 & Up (Part No.20026)
from
$164.99
Yukon replacement standard open carrier case for Dana 30, 3.73 & up, 1.943″ tall. If purchasing this case for a D30 JK front, you will need to also purchase spider gear set YPKD30-S-27.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits Dana Spicer 30
- 3.73 and up ratio only
- Does not include spider gears
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With Fine Spline And A 1310 U/Joint Size (Part No.41017)
from
$121.99
Yukon replacement yoke for Dana 30, 44, and 50 with fine spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)
from
$30.99
Product Features:
See More
- Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
Yukon Gear – Replacement Yoke For Dana 30, 44, 50, And 300 With 26 Spline And A 1310 U/Joint Size (Part No.41018)
from
$121.99
Yukon replacement yoke for Dana 30, 44, 50, and Dana 300 with 26 spline and a 1310 U/joint size. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
USA Standard Gear – Spartan Locker for Dana 30 Differential with 27 Spline Axles, Includes Heavy-duty Cross Pin Shaft (Part No.17000)
from
$639.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect. Does not fit Std. JK Carrier. Use YC D706008
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
Yukon Gear – Replacement Cross Pin Shaft For Standard Open Dana 30 (Part No.33316)
from
$12.99
Product Features:
See More
- Cross pin shaft for Dana Spicer 30
- Fits standard open differentials only
USA Standard Gear – Open Spider Gear Set For Dana Spicer 30, 27 Spline (Part No.39005)
from
$151.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 30 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
SKF – Pinion Seal, Red (Part No.J701050573SKF)
from
$16.92
Pinion Seal, Red
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Driveworks – Taper Bearing Cup (Part No.S-LM-501314)
from
$7.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Volvo 164 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Volvo 164
You love your 164. So we’ve made it easier than ever to help you find Volvo 164 Drivetrains in our online catalog. Our inventory holds 125 aftermarket and OEM Drivetrains for your Volvo 164, ranging from $1.67 to $1,566.99.
We offer parts from 16 brands trusted to make quality Drivetrains for your Volvo 164. Before you buy, take some time to read through customer reviews. We currently have 3,722 reviews of Volvo 164 Drivetrains from previous customers. Some of the top rated parts include Bearings with 4.0 stars and Differential Master Bearing Kit – Timken with 3.0 stars.
Find your 164 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Volvo 164 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Volvo 164
Our inventory holds Drivetrains for your Volvo 164 from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Driveworks, and Spicer, all of which can keep that Volvo happy.
We have Spicer parts available for your Volvo 164 in categories like Drive Shafts and Axles and Universal Joints. Some of the top-rated Spicer parts in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
Leading MOOG Driveline Products Drivetrains
We carry MOOG Driveline Products brand parts for your Volvo 164 across several catalog categories, including Universal Joints. Some of our most reviewed MOOG Driveline Products parts include:
FAQs for Volvo 164 Drivetrains
What are the most purchased Drivetrains for the Volvo 164?
Out of 125 Drivetrains for the Volvo 164, the most popular in our inventory are:
from
$57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
from
$11.99
This product is not rated
Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24
Differential Ring Gear Bolts
What are the top-rated Volvo 164 Drivetrains?
Top-rated Drivetrains for your Volvo 164 based on customer reviews/ratings are:
from
$25.49
(1)
Bearings
“This Is The One That Fit My 1971 CHEVY TRUCK 12 BOLT PINION REAR BACK BEARING”
from
$109.99
(1)
Differential Master Bearing Kit – Timken
“Pinion bearing was for a Ford not a Jeep as indicated. Had installer purchase from another source.”
