1975 Volvo 164 Drivetrains
More 1975 Volvo 164 Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1975 Volvo 164, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1975 Volvo 164 Drivetrains
Yukon Gear – 1310 & 1330 U/Joint Strap, Dana 30, Dana 44, Model 35, & 9.25" With Bolts (Part No.41195)
from
$18.99
1310 & 1330 U/joint strap, Dana 30, Dana 44, Model 35, & 9.25″ w/bolts.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Dana Spicer 30 and 44, AMC Model 35 and Chrysler 9.25″
- 1310 and 1330 u-joint size
- Includes two straps and four bolts
Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)
from
$7.99
Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.
Product Features:
See More
Product Features:
- Pinion gear thrust washer for Dana Spicer 25, 27 and 30
FAG – Drive Shaft Support Bearing (Part No.K1040390203FAG)
from
$40.95
FAG drive shaft support bearings are built to meet or exceed OE specifications. FAG Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination.
Product Features:
See More
Product Features:
- Original equipment design and quality
- Utilizes OE equivalent or better materials
- Pre-Lubricated and reinforced seals
Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)
Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)
from
$12.99
Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.
Product Features:
See More
Product Features:
- Roll pin for Dana Spicer 30 and Dana Spicer 44
- 0.235″ diameter
Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)
from
$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Dana Spicer 30 open differential with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
Yukon Gear – Dana 30 & Dana 44 Power Lok Bolt, Left Hand, & 8.75" Chrysler & 55P (Part No.33234)
from
$26.99
Dana 30 & Dana 44 Power Lok bolt, left hand, & 8.75″ Chrysler & 55P.
Product Features:
See More
Product Features:
- Power Lok case bolt for Dana Spicer 30, Dana Spicer 44, Chrysler 8.75″ and 1955-1964 GM passenger car
- Left hand thread
Yukon Gear – Replacement Carrier Shim Kit For Dana 30 & 44 With 19 Spline Axles (Part No.55018)
from
$30.99
Product Features:
See More
- Carrier shim kit for Dana Spicer 30 and Dana Spicer 44 with 19 spline axles
Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)
from
$279.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
SKF – Wheel Bearing (Part No.K8000390037SKF)
from
$54.25
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.
Product Features:
See More
Product Features:
- Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
- 100% tested to the actual OE specifications per part number for fit, form and function
- High quality steel and surface finishes
- Proper implementation of heat treatment
USA Standard Gear – Open Spider Gear Set For Dana Spicer 30, 27 Spline (Part No.39005)
from
$151.99
Product Features:
See More
- Spider gear kit
- Fits Dana Spicer 30 27 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
National – Bearings (Part No.208-SL)
from
$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)
from
$99.99
Redline Synthetic “Shock Proof” Oil. 3 Quarts.
Product Features:
See More
Product Features:
- Includes three quarts of Redline Shockproof oil
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)
from
$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 and 44
- 26 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)
from
$99.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30
- Includes carrier bearings and races and carrier shim kit
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
National – Shaft Repair Sleeve (Part No.99147)
from
$41.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
SKF – Wheel Seal (Part No.K8010285798SKF)
from
$39.23
Wheel Seal
Yukon Gear – Replacement Ring Gear Bolt For Model 35, Dana 25, 27, 30 & 44 – 3/8" X 24 (Part No.33038)
from
$11.99
Replacement ring gear bolt for Model 35, Dana 25, 27, 30 & 44. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Dana Spicer 25, 27, 30, 44 and AMC Model 35
- 3/8″ x 24 thread
Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41020)
from
$125.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.125″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44
- 26 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.125″ cap diameter
- Outside snap ring design
- U-bolt style
Motive Gear – Differential Carrier (Part No.D30-CL)
from
$83.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
Popular 1975 Volvo 164 Drivetrains Categories
1975 Volvo 164 Drivetrains
You count on your 1975 Volvo 164 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 122 Drivetrains ranging in price from $1.63 to $1,303.99, you’re sure to find everything you need for your 1975 Volvo 164.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Moog, and Driveworks. 1975 Volvo 164 Drivetrains start as low as $1.63!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 709 extensive product reviews on 1975 Volvo 164 Drivetrains. Some of the top-rated Drivetrains products we carry are Greaseable Super Strength Universal Joint with 4.6 stars and Non-Greaseable Super Strength Universal Joint with 4.3 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1975 Volvo 164 below to get started!
Top-Rated Drivetrains Brands For Your 1975 Volvo 164
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1975 Volvo 164 running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, Driveworks, and even more.
Popular Spicer Drivetrains
You’ll find popular Spicer brand products across Universal Joints and Drive Shafts and Axles. All are waiting to get your 1975 Volvo 164 back on the road. Some of the top-rated Spicer products in these categories are:
Top-Rated Drivetrains
If are what you’re looking for, our inventory holds plenty. We stock brand Drivetrains for your 1975 Volvo 164, and some of our most reviewed parts include:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
FAQs for 1975 Volvo 164 Drivetrains
What are the most purchased Drivetrains for the 1975 Volvo 164?
Out of 122 Drivetrains for the 1975 Volvo 164, the most popular in our inventory are:
What are the top-rated 1975 Volvo 164 Drivetrains?
Top-rated Drivetrains for your 1975 Volvo 164 based on customer reviews/ratings are:
from
$32.99
(37)
Greaseable Super Strength Universal Joint
“grease fitting I like location dont like needle design to grease should be regular design fitting”
