Volvo 142 Drivetrains
Top Volvo 142 Drivetrains Categories
We carry over 123 Drivetrains in inventory for the Volvo 142. If you’re looking for aftermarket Drivetrains for your Volvo 142, check out all these categories:
Essential Volvo 142 Drivetrains
Yukon Gear – Pinion Install Kit For Dana 30 Rear Differential (Part No.13017)
from
$233.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Zip Locker Bulkhead Quick-Disconnect Fitting (Part No.34038)
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
SKF – Pinion Seal, Red (Part No.J701050573SKF)
from
$16.92
Pinion Seal, Red
National – Bearings (Part No.206)
from
$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Zip Locker For Dana 30 With 27 Spline Axles, 3.73 & Up (Part No.34016)
from
$1303.99
The Yukon Zip Locker is the latest in on-demand traction. Its air-operated design allows you to switch from an open differential to 100% lockup when you need it, giving you the ultimate in driver selectability. The Yukon Zip locker is an air operated locker that provides selectable traction for off road or street use. This unit features 4320 Chrome Moly internals for added strength. Assembled in the USA! compressor sold separately. All Zip Lockers are backed by the best warranty in the business! All Zip Lockers come with a six (6) year warranty, including any collaterally damaged parts and associated labor, up to $2,000, for the first two (2) years.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 with 27 spline axles
- 3.73 and up ratio only
- Forged case and 8620 internals for added strength
- Works with a variety of air delivery systems
- Assembled in the USA
Yukon Gear – Replacement Cover Gasket For Dana 30 (Part No.23003)
Yukon Gear – Replacement Oil Baffle For Model 35 IFS Front, Dana 25, 27, 30, 44 IFS & Disconnect And Dana 50 (Part No.33002)
from
$4.99
Product Features:
See More
- Oil baffle for Dana Spicer 30, Dana Spicer 44 IFS, Dana Spicer 50, AMC Model 35 IFS
Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)
from
$10.99
Dana 25, Dana 27, & Dana 30 side gear Thrust washer.
Product Features:
See More
Product Features:
- Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
- 1.560″ I.D.
- Fits standard open differentials only
MTC – Driveshaft Support Washer (Part No.K105294653MTC)
from
$1.63
The MTC Driveshaft Support Washer is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Corteco – Axle Seal (Part No.K4021390035CFW)
from
$7.46
You can expect original quality and a first-to-market range from Freudenberg, the inventor and the world’s leading Original Equipment manufacturer of radial shaft seals. As the aftermarket distribution arm of Freudenberg Group – the designer and OEM manufacturer of the Simmerrings – Corteco draws on the material and manufacturing expertise of its parent company and is able to deliver products with outstanding OE quality, distinguished by the high durability of their sealing properties. A new generation of innovative seals that help to reduce friction and fuel consumption is also available.
Product Features:
See More
Product Features:
- Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
- The flanged design allows for easier and proper installation and helps avoid cocking.
- The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
- Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.
Yukon Gear – Dana 25 / 27 / 30 / 36 / 44 / 53 Pinion Nut Washer Replacement (Part No.33163)
from
$3.99
Replacement pinion nut washer for Dana 25, 27, 30, 36, 44 & 53.
Product Features:
See More
Product Features:
- Pinion nut washer for Dana Spicer 25, 27, 30, 44 and 50
National – Bearings (Part No.107-DD)
from
$38.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Bearing Race Driver (Part No.56022)
from
$188.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M86610 race
- All steel construction
Yukon Gear – Replacement Pinion Nut For Dana 25, 27, 30, 36, 44, 53 & GM 7.75" (Part No.33143)
from
$6.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Pinion nut for Dana Spicer 25, 27, 30, 44, 50 and GM 7.75″
- 3/4″ x 16 thread
Yukon Gear – Dana 25 / 27 / 30 / 44 / 50 Inner Oil Slinger Replacement (Part No.33012)
Yukon Gear – Carrier Installation Kit For Dana 30 Differential (Part No.57002)
from
$93.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 30 differential. This kit contains carrier bearings, races and shims.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30
- Includes carrier bearings and races and carrier shim kit
National – Bearings (Part No.206-FF)
from
$17.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Differential Pinion Yoke Assembly (Part No.697-542)
from
$111.99
Drive shaft pinion yoke corroded or damaged? This pinion yoke directly replaces the original equipment on specific vehicle years, makes and models to restore smooth driving.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft pinion yoke directly replaces the original equipment on specified vehicles
- Effective fix – replacement restores proper connection between drive shaft and differential
- Rigorously tested – designed and evaluated to assure safe, reliable operation
- Trustworthy quality – backed by team of engineers and inspectors in the United States
Yukon Gear – Minor Install Kit For Dana 30 Rear Differential (Part No.12014)
from
$135.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Dana Spicer 30 rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Yukon Gear – High Performance Ring & Pinion Replacement Gear Set For Dana 30 In A 4.56 Ratio (Part No.24021)
from
$368.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 30 without crush sleeve
- 7.20″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 4.56 ratio
National – Bearings (Part No.A-5)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.201-CC)
from
$15.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Replacement Standard Open Spider Gear Kit For Dana 30 With 27 Spline Axles (Part No.16073)
from
$155.99
Yukon replacement standard open spider gear kit for Dana 30 with 27 spline axles and with or without quick disconnect. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Dana Spicer 30 open differential with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Volvo 142 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Volvo 142
You love your 142. So we’ve made it easier than ever to help you find Volvo 142 Drivetrains in our online catalog. Our inventory holds 123 aftermarket and OEM Drivetrains for your Volvo 142, ranging from $1.63 to $1,303.99.
We offer parts from 15 brands trusted to make quality Drivetrains for your Volvo 142. Before you buy, take some time to read through customer reviews. We currently have 4,996 reviews of Volvo 142 Drivetrains from previous customers. Some of the top rated parts include Bearings with 2.3 stars and Bearings with 5.0 stars.
Find your 142 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Volvo 142 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Volvo 142
Our inventory holds Drivetrains for your Volvo 142 from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, National, and DriveWorks, all of which can keep that Volvo happy.
We have MOOG Driveline Products parts available for your Volvo 142 in categories like Universal Joints. Some of the top-rated MOOG Driveline Products parts in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
Leading MOOG Driveline Products Drivetrains
We carry MOOG Driveline Products brand parts for your Volvo 142 across several catalog categories, including Universal Joints. Some of our most reviewed MOOG Driveline Products parts include:
FAQs for Volvo 142 Drivetrains
What are the most purchased Drivetrains for the Volvo 142?
Out of 123 Drivetrains for the Volvo 142, the most popular in our inventory are:
What are the top-rated Volvo 142 Drivetrains?
Top-rated Drivetrains for your Volvo 142 based on customer reviews/ratings are:
from
$17.49
(3)
Bearings
“This bearing was a perfect fit for use with the intermediate drive shaft on a 2009 Chev. Malibu with 2.4L engine and 6-spd. auto trans. (LE5 with MH8)”
