Volkswagen CC Fuel and Emissions Systems

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

• OE-Equivalent.
• Direct fit for easy installation.
• OE Style connectors and wire lengths.
• Base ceramic probe of Zirconium and Yttrium.
• Patented Platinum Power Grid.

This fuel pump driver module is a direct replacement for the original equipment module. Designed to match the original fit and function, it features a plug & play connection for an easy installation.

Product Features:

• Direct replacement – this fuel pump driver module matches the fit and function of the original equipment module to restore vehicle operation
• Plug and play installation – this fuel pump driver requires no modifications or special tools to install
• Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
• Quality tested – vehicle simulation tested to ensure performance

Fuel Pump Tappet

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

• CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
• CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
• CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye

Product Features:

• Helps avoid premature fuel pump failure
• Lint free towel included
• Low suds formulation
• Removes harmful contaminants from the fuel tank

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

• OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
• PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
• OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
• EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
• EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
• ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
• NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

Secondary Air Inj. S

Hitachi’s High Pressure Fuel Pumps (HPPs) are designed to enhance fuel volume delivery for exceptional operation and faster vehicle response. Our HPPs are a good alternative to the standard fuel pump for direct injection, supercharged, and turbocharged applications commonly found in todays vehicles. Pump housing is made of high strength aluminum to ensure durability while keeping weight low. Precision machined surfaces prevent fuel leakage/pressure drop while chemical resistant seals prevent premature wear from ethanol mixed fuels. Designed to meet the exact needs of each specific vehicle, Hitachi’s High Pressure Fuel Pumps are the premium choice. Hitachi is a Tier One OE supplier to the largest automobile manufacturers globally, delivering industry leading quality, and exceeding customer expectations with our products and service. Hitachi is bringing that same knowledge and expertise to the premium products we deliver in the Aftermarket because Quality Matters.

Product Features:

• These quality High Pressure Pumps provide exceptional operation with enhanced fuel volume delivery and faster vehicle response. Promotes a rise of fuel pressure from startup; reduces current consumption.
• Hitachi is a Tier 1 OE supplier for high pressure fuel pumps
• 100% NEW, never remanufactured
• Meets the OE performance and durability standards for this application
• High strength aluminum housing for light weight and durability
• Chemical resistant seals prevent premature wear from ethanol mixed fuels
• Precision machined surfaces prevent fuel leakage and subsequent pressure drop
• O-Ring/Gaskets included when applicable

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

• Each unit is 100% tested to OE specifications.
• Includes new o-rings and seals made of premium OE quality materials.
• Includes application specific technical bulletin, where applicable.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

The VDO Electric Fuel Pump Assembly meets or exceeds the OE specifications for fit, durability and performance.

Product Features:

• OE-Equivalent electric fuel pump
• Direct fit for easy installation
• OE connections and fittings
• Highly efficient turbine design
• Designed for quieter operation

CARQUEST fuel injector seal kits include the necessary o-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

• Premium OE quality materials.
• Services one injector.

Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.

Product Features:

• OEM Quality Direct fit Application
• Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
• Extensive measuring range
• Highly sensitive, particularly for small changes in flow rate
• Wear-free since there are no moving parts
• Insensitive to dirt and contamination
• Utilizes the factory style mounts, connectors and fittings
• Provides exceptional reliability

Breather Hose

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Air Temp. Sensor

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

• BAR Certified adapters
• Adapter check’s a fuel cap’s ability to hold pressure.
• Adapters meet EPA standards for recommended fleet coverage.
• Check adapter application chart for specific makes and models

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Relay