Triumph TR8 Fuel and Emissions Systems
Top Triumph TR8 Fuel and Emissions Systems Categories
We carry over 7 Fuel and Emissions Systems in inventory for the Triumph TR8. If you’re looking for aftermarket Fuel and Emissions Systems for your Triumph TR8, check out all these categories:
Essential Triumph TR8 Fuel and Emissions Systems
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
NTK – Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit (Part No.25572)
from
$49.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Carquest Premium – Remanufactured Fuel Injector (Part No.A213-1075)
from
$38.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Carquest – Fuel Injector (Part No.57519)
from
$59.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
Mr. Gasket – High Performance Electric Fuel Pump – Universal Carbureted Engines (Part No.42S)
from
$56.99
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!
Product Features:
See More
Product Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No DiaphraGMs Or Mechanical Parts To Wear Out
- Makes An Excellent Fuel Transfer or Booster Pump
- Hose Barbs Fit 5/16″ Fuel Hose
- Self-priming, 2 wire design
- Eliminates vapor lock and flooding
Felpro – Fuel Pump Mounting Gasket (Part No.6579)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Electric Fuel Pump Inertia Switch (Part No.SBA4426)
from
$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Triumph TR8 Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your Triumph TR8
You love your TR8. So we’ve made it easier than ever to help you find Triumph TR8 Fuel and Emissions Systems in our online catalog. Our inventory holds 7 aftermarket and OEM Fuel and Emissions Systems for your Triumph TR8, ranging from $2.99 to $84.99.
We offer parts from 6 brands trusted to make quality Fuel and Emissions Systems for your Triumph TR8. Before you buy, take some time to read through customer reviews. We currently have 136 reviews of Triumph TR8 Fuel and Emissions Systems from previous customers. Some of the top rated parts include Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit with 4.5 stars.
Find your TR8 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Triumph TR8 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your Triumph TR8
Our inventory holds Fuel and Emissions Systems for your Triumph TR8 from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Felpro, Delphi, and Mr. Gasket, all of which can keep that Triumph happy.
We have Felpro parts available for your Triumph TR8 in categories like Fuel Pumps. Some of the top-rated Felpro parts in these categories are:
FAQs for Triumph TR8 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the Triumph TR8?
Out of 7 Fuel and Emissions Systems for the Triumph TR8, the most popular in our inventory are:
What are the top-rated Triumph TR8 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your Triumph TR8 based on customer reviews/ratings are:
from
$49.99
(2)
Switching Oxygen Sensor: 1 Wire, 10.75" Long, Non-Heated, Direct Fit
“Nice and easy, better than the oem by far.”
