Toyota Tacoma Exhaust System Kits

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3″ dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno Finishing off this exhaust is a 3-1/2″ diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2″ Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. Th e bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Aggressive Sound
• Complete w/Necessary Hardware

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19275 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19275 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

aFe introduces the MACH Force XP exhaust system for the BMW M5 F10 twin-turbo. In recent testing this system produced 18 horsepower and 30 lbs. x ft. of torque. This unique exhaust system is constructed from TIG-welded, 3 in. mandrel bent 304 stainless steel and uses quad, high-flow mufflers. This system was designed and engineered by tuning the perfect tube lengths, ultimately maximizing performance across the power band while maintaining a great tone. Also included is an X-pipe balance tube which equalizes and evenly distributes exhaust pulses for increased flow and minimizing exhaust drone. To finish off this system, aFe uses four 4 in. carbon fiber tips with 303 stainless steel machined finish inserts. This exhaust uses all factory hanger locations for a hassle-free installation. No modifications necessary. All aFe exhaust systems are manufactured in our Corona, California manufacturing facility.

Product Features:

• 3 in. Mandrel Bent Stainless Steel
• 100% Hand TIG Welded
• Leak Free Seal
• Aggressive Sound

Introducing the new aFe Power MACH Force XP dual exhaust system for the 05-09 Ford Mustang V6-4.0L. In recent testing, this system produced 12 horsepower and 16 lbs. x ft. of torque. This exhaust is constructed from 2.5in. mandrel bent, stainless steel and is MIG-welded. Dual high flow, stainless steel, single in, single out mufflers are used to maximize performance across the power band while maintaining a great tone. To finish off this exhaust aFe uses dual, laser etched, 3.5in. polished 304 stainless steel tips. Note: The V8 rear bumper cover is recommended (Ford OE Part Number 5R3Z17K835BAA). The use of the OE V6 bumper cover requires cutting and should be performed by a skilled technician.

Product Features:

• 3 in. Mandrel Bent 409 Stainless Steel Tubing
• Hassle Free Installation
• Free Flow Muffler
• Aggressive Sound

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-9013 2.5″ Stainless Steel Exhaust System 95-99 Tacoma 4X4 Prerunner Xtra Cab Short Bed
• Large diameter stainless steel mandrel-bent tube

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• Installation Is a Snap
• Leak Free Seal
• Aggressive Sound

The MagnaFlow 2005-2012 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17115 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2005-2012 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17115 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17115’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17115 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe’s Mach Force Xp exhaust system. Constructed from 2-1/2″ to 3″ mandrel bent 409 stainless steel for improved flow and long-lasting performance, the system is 100% hand MIG-welded by certified craftsmen for race proven strength and durability. The Mach Force Xp system features a high-flow, straight through designed, 409 stainless steel muffler for improved performance gains while delivering an aggressive tone. The Mach Force Xp is finished off with a 4-1/2″ diameter, stainless-steel exhaust tip for a custom look and includes quality hardware and clamps for a hassle-free install. Flow and Performance: This Mach Force-Xp Series exhaust system is constructed of 2-1/2″ and 3″ mandrel bent 409 stainless steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: A high-flow, straight through designed 409 stainless steel 18″ length muffler improves performance gains across the power band while producing an aggressive tone. 4-1/2″ Exhaust Tip: Finishing off this system is a 4-1/2″ black, angle-cut, stainless steel exhaust tip w/ laser-cut aFe POWER badge for quality brand recognition and a custom-styled look. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Installation is a Snap: This Mach Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Straight Thru Muffler For Increased Gains
• 100 Percent Hand MIG-Welded For Long Lasting Quality
• Stainless Steel Exhaust Tip w/aFe Logo

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
• Features A Black Chrome Finish On T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

aFe power introduces the MACH Force-Xp cat-back exhaust system constructed out of 2.5″ 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5″ diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.

Product Features:

• 100% MIG-Welded
• High Flow Straight Through Muffler
• Features Hi Tuck Design For Maximum Clearance For Off Roading
• Bayonet Hangers Maintain A Stable Pipe Location

BRExhaust offers exhaust flange bolts and kits to secure their premium line of exhaust replacement components. Each component delivers the strength of steel, a proper fit and an easier install or repair. BRExhaust has individual bolts, as well as bolts with springs and nuts to get your project completed. Choose the individual part or kit designed to fit on your vehicle application. The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement spring and bolt kits instantly equip your ride with optimally restored emissions control.