1999 Toyota Tacoma Exhaust System Kits

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe’s Mach Force Xp exhaust system. Constructed from 2-1/2″ to 3″ mandrel bent 409 stainless steel for improved flow and long-lasting performance, the system is 100% hand MIG-welded by certified craftsmen for race proven strength and durability. The Mach Force Xp system features a high-flow, straight through designed, 409 stainless steel muffler for improved performance gains while delivering an aggressive tone. The Mach Force Xp is finished off with a 4-1/2″ diameter, stainless-steel exhaust tip for a custom look and includes quality hardware and clamps for a hassle-free install. Flow and Performance: This Mach Force-Xp Series exhaust system is constructed of 2-1/2″ and 3″ mandrel bent 409 stainless steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: A high-flow, straight through designed 409 stainless steel 18″ length muffler improves performance gains across the power band while producing an aggressive tone. 4-1/2″ Exhaust Tip: Finishing off this system is a 4-1/2″ black, angle-cut, stainless steel exhaust tip w/ laser-cut aFe POWER badge for quality brand recognition and a custom-styled look. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Installation is a Snap: This Mach Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Straight Thru Muffler For Increased Gains
• 100 Percent Hand MIG-Welded For Long Lasting Quality
• Stainless Steel Exhaust Tip w/aFe Logo

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.7L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19275 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19275 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 2.5 in. Mandrel Bent 409 Stainless Steel Tubing
• Installation Is a Snap
• Leak Free Seal
• Aggressive Sound

aFe power introduces the MACH Force-Xp cat-back exhaust system for the 2005-2012 Toyota Tacoma with L4-2.7L engine. This cat-back exhaust is constructed out of 2-1/2 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4 diameter black tip. The tip comes with a laser-etched aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 10 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

The MagnaFlow 2013-2015 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17147 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2013-2015 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17147 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17147’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17147 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

aFe power introduces the MACH Force-Xp cat-back exhaust system for the 2005-2012 Toyota Tacoma with L4-2.7L engine. This cat-back exhaust is constructed out of 2-1/2 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4 diameter black tip. The tip comes with a laser-etched aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 10 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-9013 2.5″ Stainless Steel Exhaust System 95-99 Tacoma 4X4 Prerunner Xtra Cab Short Bed
• Large diameter stainless steel mandrel-bent tube

The MagnaFlow 2005-2012 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 4.0L 2005-2012 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 3.5in. Polished Welded-On Single Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16625 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16625 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-9016 2.5″ Stainless Steel Exhaust System 05-12 Tacoma Access/Double Cab & Long Bed
• Large diameter stainless steel mandrel-bent tube

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Middle Exit Tips w/Laser Etched Logos
• High Flow Stainless Steel Mufflers
• Aggressive Sound
• Hardware Included

This Rebel Series cat-back is designed with dual polished exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3″ dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno Finishing off this exhaust is a 3-1/2″ diameter polished tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2″ Dia. Polished Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ diameter polished 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. Th e bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Aggressive Sound
• Complete w/Necessary Hardware

This Rebel Series cat-back is designed with dual black exhaust tips that exit in front of the rear passenger tire for a unique, aggressive look. The tips come with unique laser-etched aFe Power logos on the side and are constructed from stainless steel for durability. The exhaust system is constructed from 3″ dual MIG-welded, mandrel bent stainless steel tubing for maximum flow, increased horsepower and torque. In testing, the cat-back exhaust system resulted in gains up to + 9 horsepower and + 16 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 3-1/2″ diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style. The performance cat-back exhaust system includes necessary hardware and clamps for a hassle-free install, with no cutting required making it a true bolt on system. 3-1/2″ Dia. Black Middle-Side Exit Tips: Finishing off the exhaust are dual 3-1/2″ diameter black 304 stainless steel clamp-on tips with a laser-etched aFe power logo on the side for an aggressive style. The tips are designed to exit from in front of the rear passenger side tire for a unique custom look. Installation Is A Snap: This Rebel Series exhaust system uses factory mounting locations providing stability and hassle-free installation. Leak-Free Seal: High quality band clamps are used for a complete 360-degree sealing surface eliminating leak paths. Aggressive Sound: A free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE-style fit that does not change with time. This makes for an easy installation with no cutting required.

Product Features:

• Mandrel Bent Stainless Steel Tubing
• High-Flow Stainless Steel Muffler
• Aggressive Sound
• Complete w/Necessary Hardware

Built from heavy duty Aluminized Steel our Performance Series exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.

Product Features:

• Built From Heavy Duty Aluminized Steel
• Built To Perform: Designed To Maximize Exhaust Flow And Minimize Exhaust Temperatures
• Fully Mandrel Bent Tubing To Minimal Bend Degree Angles
• Easy Installation
• Limited 1 Year Warranty

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5 diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 15 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

BORLA(R) Cat-Back(TM) And Axle-Back exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere.

Product Features:

• Built From Premium T-304 Austenitic Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive Sound Of Power Respected By Motoring Enthusiasts Everywhere
• Features A Black Chrome Finish On T-304 Stainless Steel Tips
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power, And Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit

Release the untapped horsepower, torque and sound from your Toyota Tacoma L4-2.7L / V6-3.5L with aFe’s Mach Force Xp exhaust system. Constructed from 2-1/2″ to 3″ mandrel bent 409 stainless steel for improved flow and long-lasting performance, the system is 100% hand MIG-welded by certified craftsmen for race proven strength and durability. The Mach Force Xp system features a high-flow, straight through designed, 409 stainless steel muffler for improved performance gains while delivering an aggressive tone. The Mach Force Xp is finished off with a 4-1/2″ diameter, stainless-steel exhaust tip for a custom look and includes quality hardware and clamps for a hassle-free install. Flow and Performance: This Mach Force-Xp Series exhaust system is constructed of 2-1/2″ and 3″ mandrel bent 409 stainless steel for maximum flow and low turbulence increasing torque, horsepower and improved throttle response. Aggressive Sound: A high-flow, straight through designed 409 stainless steel 18″ length muffler improves performance gains across the power band while producing an aggressive tone. 4-1/2″ Exhaust Tip: Finishing off this system is a 4-1/2″ black, angle-cut, stainless steel exhaust tip w/ laser-cut aFe POWER badge for quality brand recognition and a custom-styled look. Perfect Fit: OE-style bayonet hangers are used to maintain a stable pi pe location during any driving conditions. The bayonet tip holds the hanger bushing in place for an OE style, long lasting fit. Installation is a Snap: This Mach Force-Xp exhaust system uses all factory mounting locations providing stability and a hassle-free installation.

Product Features:

• Mandrel Bent 409 Stainless Steel Tubing
• High Flow Straight Thru Muffler For Increased Gains
• 100 Percent Hand MIG-Welded For Long Lasting Quality
• Stainless Steel Exhaust Tip w/aFe Logo

The MagnaFlow 2013-2015 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17151 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2013-2015 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17151 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17151’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 2 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17151 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

aFe power introduces the MACH Force-Xp cat-back exhaust system for your Toyota Tacoma. This cat-back exhaust is constructed out of 2-1/2 IN 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. Finishing off this exhaust is a 4 IN diameter polished tip. The tip comes with a laser-etched aFe Power logo for an aggressive style.

Product Features:

• +3 HP & +4 Lbs. x Ft. TQ
• Constructed from 2-1/2 IN Mandrel-Bent Tubing for Maximum Flow
• OE-Style Flange and Band Clamps for a Leak-Free Seal
• High-Flow Muffler Absorbs High Pitch Tones and Produces a Powerful Sound Includes 4 IN Diameter Polished Tip

Introducing an all new Rebel Series Dual Center Exit Cat-Back exhaust system for the Jeep Wrangler (JK) with V6-3.6L/3.8L engine. This unique Rebel Series exhaust system is designed with dual center exit tips for an aggressive look. The Tips are 4-1/2″ with aFe power plates and constructed out of stainless steel for durability. This performance cat-back exhaust is constructed of 2-1/2″ MIG-welded mandrel-bent stainless steel tubing. The smooth curves and increased diameter of this exhaust system helps remove restriction and keeps exhaust gas flowing smoothly for increased horsepower, torque and throttle response. In testing, this cat-back exhaust system added an astounding +9 horsepower and +14 lbs. x ft. of torque as verified by our in house dyno. This exhaust system comes complete with a 22″ free-flowing muffler, OE style bayonet hangers, band clamps and all hardware necessary for a hassle-free installation.

Product Features:

• Unique Dual Middle Exit Tips w/Laser Etched Logos
• High Flow Stainless Steel Mufflers
• Aggressive Sound
• Hardware Included

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Mandrel Bent
• Free Flow System
• Increased Horsepower And Torque
• Increased flow

For the person who wants a subtle custom appearance with all the benefits that a Flowmaster Cat-back exhaust system provides. SOS. (Single out side) systems are the perfect choice. American Thunder systems deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage. Designed for an easy fit, these systems include all necessary parts and hardware for easy installation.

Product Features:

• Mandrel bent 16 gauge 409 stainless tubing
• Moderate exterior exhaust tone
• Includes hangers and hardware for easy installation
• Connects after factory catalytic converter
• Dyno tuned for maximum performance

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-9015 2 1/4″ Stainless Steel Exhaust System 00-04 Tacoma Xtra Cab Short Bed
• Large diameter stainless steel mandrel-bent tube

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

Product Features:

• Mandrel Bent
• Free Flow System
• Increased Horsepower And Torque
• Increased flow

aFe power introduces the MACH Force-Xp cat-back exhaust system for the Toyota Tacoma with V6-3.5L engine. This cat-back exhaust is constructed out of 3 100% MIG-welded, mandrel-bent, stainless steel tubing for maximum flow. The smooth transition bends and free-flow stainless steel muffler allow for low turbulence, increasing horsepower, torque and improved throttle response. In testing, the cat-back exhaust system resulted in gains up to +9 horsepower and +10 lbs. x ft. of torque, as measured on our in-house dyno. Finishing off this exhaust is a 4.5 diameter black tip. The tip comes with a laser-cut aFe Power badge riveted on for an aggressive style.

Product Features:

• Produces An Astonishing 9 HP And 15 ft./lbs. Torque
• Made From Mandrel Bent Stainless Steel Tubing For Maximum Flow
• High Quality Flange And Band Clamps Improve Sealing Surface
• Straight Through Design Free-Flowing Stainless Steel Muffler

The MagnaFlow 2005-2012 Toyota Tacoma Off-Road Pro Series Cat-Back Performance Exhaust System 17115 brings additional off-roading prowess and our deep signature exhaust note to your 4.0L 2005-2012 Toyota Tacoma with a weight-optimized, dyno-tested, corrosion resistant and durable stainless steel design engineered to closely hug the undercarriage for improved ground clearance. Exhaust kit 17115 is engineered to produce Very Aggressive exterior and Aggressive interior sound levels. Extensive 3D scanning was used during the development of this Toyota Tacoma exhaust system to create a direct-fit design, enabling a do-it-yourself installation process. 17115’s emissions-legal cat-back design replaces all your truck’s exhaust components from the catalytic converter on back with its 2.5in. diameter mandrel bent main piping that passes through 1 Straight-Through mufflers before ending in a turndown before rear axle exit with 3in. Satin Clamp-On Single Wall Turndown Cut Edge tips. Exhaust system 17115 is produced using advanced CNC precision robotic manufacturing techniques and backed by MagnaFlow’s limited lifetime warranty.

Product Features:

• Available for gas or diesel trucks and SUV’s
• 100% Stainless Steel
• High flow straight through design

The MagnaFlow 2016-2023 Toyota Tacoma Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.5L 2016-2023 Toyota Tacoma with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 2 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Toyota Tacoma exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Toyota Tacoma’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19293 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19293 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

Product Features:

• JBA Performance Exhaust 40-9012 2 1/4″ Stainless Steel Exhaust System 95-99 Tacoma 4X4 Xtra Cab Short Bed
• Large diameter stainless steel mandrel-bent tube