Toyota Sequoia Automotive Accessories

The Rightline Gear Car Back Carrier is a patented cargo bag that attaches to the rear of your vehicle, WITH or WITHOUT a roof rack. The perfect solution for those who engage in paddle sports, snow sports, or cycling. Keep your gear on the roof and your cargo on the back! The location of the Carrier allows for easy access and also shields it from the wind, saving you $$$ at the gas pump. The Carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The bottom pole frame provides structural support for the cargo in the bag. The Rear Car Clips attach the Car Back Carrier to the rear hatch door on vehicles without a roof rack.

Product Features:

• Capacity: 13 cu ft
• Dimensions: 40″ L x 20″ W x 28″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% Waterproof with welded seams and a urethane coated zipper
• Includes: carrier, bottom pole frame, (2) Rear Car Clips, (1) 2″ W belt strap, (2) 1″ W bottom straps, and stuff sack with sewn-in set up guide
• PVC Mesh (polyester re-enforced PVC) and Hydrotuff Material (PVC-backed polyester), UV resistant
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Attaches to SUVs, minivans, and crossovers WITH a roof rack (either side rails or cross bars)
• Install on vehicles WITHOUT a roof rack with Cargo Saddlebag Car Clips (purchased separately)
• Bottom pole frame provides structure and rigidity for the bag
• Includes: Cargo Saddlebag, bottom pole frame, (1) 2″ W belt strap, (2) 1″ W bottom straps, stuff sack, and sewn-in set up guide

Freeze Plug Heater Cartridge made of cast aluminum. Interchangeable with the manufacturers original equipment-the only cost effective aftermarket solution available. Installs easily, just install in engine block core hole. No longer necessary to remove frost plug or drain coolant-just coat wit NSCG silicone grease G-624 (not included), insert, and clip into place. Original equipment for Toyota, Chrysler-jeep, Hyundai, Kia, and General Motors applications (see application guide for details). Simplified application information-Entire range of manufacturers applications covered by only five part numbers.

Product Features:

• Freeze plug heater cartridge

AVS In-Channel Ventvisor® offers a sleek profile that helps keep rain out and lets fresh air in to reduce interior heat build up. It’s easy no-drill application makes installation and provides a custom fit for your vehicle. AVS; the creator of the side window deflector category, lets fresh air in while keeping rain out. The best exterior window protection with a large selection of window deflectors and for cars, trucks, SUV’s and CUV’s.

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved low-profile design
• Installs in the window channel for a sleek, aerodynamic appearance
• Made from durable, impact-resistant acrylic
• Available in dark smoke finish

Sometimes the outer case for your keyless entry remote can be damaged or cracked. Even normal wear and tear can often lead to an unpleasant cosmetic appearance. This replacement shell will have your remote looking sleek and stylish in no time.

Product Features:

• Replacement Case for Select Toyota Remotes
• Replaces OEM factory-original remote case

AVS Bugflector® helps prevent damage to the hood, windshield and fenders from road debris and bugs. Bugflector comes in a traditional hood width design that improves the look of your vehicle and protects your investment. Bugflectors install quickly and are molded with a higher profile with custom fit applications for trucks, vans, SUVs and CUVs. Whether you drive a truck, SUV, CUV or passenger car, you can choose from the style that suits your design preferences and vehicle style.

Product Features:

• Provides deflection to protect hood, fenders, and windshield
• High profile, narrow tapered design for Trucks, SUVs, and Vans
• Off-the-hood design allows for easy cleaning and waxing
• Durable, impact-resistant acrylic construction
• Available in dark smoke finish
• Easy, no-drill installation

This floor mat retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this floor mat retainer matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Covercraft’s custom fit Polycotton Car Cover provides good basic indoor protection for your vehicle. A good choice for a budget conscience shopper looking for basic coverage and protection. Constructed from drill weave Polycotton blend materials. Fabric is soft and durable to protect your paint finish. Polyester material is sun and water resistant. Comes in gray.

Product Features:

• Good basic indoor protection
• Drill weave Polycotton blend
• Resists tears and punctures
• Treated to resist rot and mildew

Remotes Unlimited is the leading supplier of replacement remote transmitters and related products for factory keyless entry and add-on alarm/remote start systems.

Product Features:

• New REMOTES UNLIMITED replacement for TOYOTA original equipment part
• 4 Buttons: Lock – Unlock – Rear Window Rolldown (or Trunk) – Panic (on back)
• CR2016 battery included
• TOYOTA #: 89742-0C010 89742-0C030 89742-35020 89742-35021 89742-35040 89742-35050
• FCC ID 2AHZT-TORK22 on part
• This part can replace any 3-button or 4-button remote with FCC ID HYQ12BAN HYQ12BBX or HYQ1512Y
• This part does NOT replace similar-looking remotes with FCC ID GQ43VT14T
• Transmitter must match the keyless entry system and options in the vehicle
• For specification help, contact RUI or search www.AdvanceAutoFob.com by FCC ID, OE number or MMY
• USER PROGRAMMABLE – User can program system to accept this part if vehicle components are working
• Programming instructions and free phone technical support are included with purchase

WeatherTech Cargo Liners provide complete trunk and cargo area protection. Our Cargo Liners are digitally designed to fit your vehicle and feature a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your investment from normal wear and tear. WeatherTech Cargo Liners feature a textured finish that helps to keep cargo from shifting. Perfect for hauling just about anything from gardening supplies to construction materials, even the family pet. WeatherTech Cargo Liners meet FMVSS302 standards. Cargo Liners are proudly designed, engineered and manufactured with American made tooling in the USA. Available for car trunks, minivans and SUVs in Black, Tan or Grey.

Product Features:

• Interior Protection From All Types Of Wear And Tear
• Custom Molded Specifically For Your Vehicle
• High Outside Lip That Helps Contain Spills
• Quick And Easy Cleanup
• A Skid Resistant Surface
• Protects And Preserves The Cargo Area And Trunk Carpet
• Toughness And Durability
• Easy Installation
• Limited Lifetime Warranty

The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area and ease of installation. Sometimes called heat shields, sun shields or UV shields, sunscreens are useful at the beach, work, airport or anywhere you park. This premium quality, custom patterned folding sunscreen also features a soft felt lining on the inside to help protect your interior.

Product Features:

• Custom fit to the windshield for complete coverage
• Protect the dash and other interior components from damage by the sun
• Reduce the interior temperature of the vehicle on hot days
• The foam core center of the shield acts as an insulator
• Easy to use and store away when not in use

With a curved design, the AVS Original Ventvisor® is a side window deflector that lets fresh air in while keeping rain out. It also helps to keep the sun out of your eyes, reduce interior wind noise and fogging, and reduce interior heat. Available in dark smoke or chrome finishes for the custom look you want. Easy to install for a lifetime of use! Enjoy fresh air and comfort no matter the weather from the company that started it all!

Product Features:

• Precision engineered for a custom fit on your vehicle with modern, curved design
• Easy installation with no-drilling or special hardware required
• Attaches easily with 3M automotive-grade adhesive above the window
• Made from durable, impact-resistant acrylic
• Available in dark smoke and chrome finishes

All our Multi-Purpose Retainers are made of high quality materials for long-lasting durability. Offering a full line of Multi-Purpose Retainers for a wide range of applications.

Product Features:

• Durable nylon design for a long service life
• Also suitable for a broad variety of industrial and commercial uses
• Conveniently packaged in a variety of piece counts
• Direct replacement Retainers available (where applicable) to ensure a proper fit

This Low Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact, lightweight and meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

This High Note Horn meets the high quality specifications for OE manufacturers around the world. It generates a high-frequency sound through a specially designed resonator. Features a heavy-duty wire motor, a body made of steel with a corrosion-resistant finish and includes a universal mounting bracket. Each horn is 12V and can be used as a single or dual terminal install. These horns are extremely compact and lightweight and they meet or exceed OEM, SAE and EEC specifications. Each horn is tested to assure maximum performance. These horns can be mounted singly or as duals. 130 dB.

One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.

Pants Saver Custom Fit 4pc Car floor Mat Set for Toyota SEQUOIA 2011 ,Tan : Designed custom fit the complex contours and surfaces of your vehicle’s floor space. Pants Saver Custom Fit Car Mat will protect your interior carpet and help keep Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of water and easily wipe or rinse clean. CUSTOM FIT: Your car mat are cut to order to fit the exact layout of your Toyota SEQUOIA 2011 floor so they install in seconds with no screws, bolts, fasteners, or tools required. PROTECT YOUR CAR AND CLOTHING: Deep grooves channel water, snow, mud, spills, and debris to a unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. SUPERIOR ALL WEATHER PERFORMANCE CAR MATS: Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C ). NON-SLIP DESIGN: Flexible nibs grip the floor to keep the mat in place without damaging your vehicle carpet. MADE IN NORTH AMERICA: Proudly manufactured in Canada by members of the United Steelworkers (USW Local 1-500).

Product Features:

• Custom fit Mats for Your Vehicle No cutting required; Water Proof: Yes ; Wear Resistance: Yes.
• Unique central pan that traps up to 500 mL (16 oz.) of liquid and easily wipe or rinse clean. Pants Saver custom fit mats helps you to protect your car.
• Odorless and suitable for All Weather. Proudly Made In North America
• Superior All weather performance, Made from non-toxic, wear-resistant recycled PVC, BPA-free PantsSaver exact fit floor mats are waterproof and odorless even in extreme weather and maintain flexibility and durability down to minus 76 Deg. F (-60 Deg. C )
• Box Contains 4Pcs x Car Mats. Please feel free to email us if you have any questions. We will provide the best service for you!
• Custom Fit Car Mats
• Anti Skid
• Raised Borders
• All Weather Protection
• Odorless

All-Weather Floor Mats Are Custom, Flexible All Season Vehicle Floor Mats With Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. All-Weather Floor Mats Are Engineered To Prevent Curling And Cracking In Sub-Zero Weather. The WeatherTech All-Weather Floor Mats Have Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand. Our All-Weather Floor Mats Are Made From An Advanced Rubber-Like Thermoplastic Elastomer (TPE) Compound That Is An OEM Approved, Virtually Odorless Latex-Free Material, That Contains No Harmful PVCs, Cadmium, Or Lead And Is 100 Percent Recyclable All-Weather Floor Mats Are Engineered To Stay Flexible In Even The Coldest Of Temperatures And Feature A Protective, Non-Stick Finish To Make Cleanup Quick And Easy. To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat. All-Weather Floor Mats Were Intended To Give The Best Possible Protection For Your vehicle Floor. Many Of Our Front And Rear Mat Applications Are Model Specific, While Others Are Assigned As The Best Possible Fit For Your Vehicle From Our Many Shapes And Sizes. Some Rear Mat Sizes Are Designed To Be Trimmed So That They May Be Customized To Fit Almost Any Vehicle.

Product Features:

• Deeply Sculpted Channels Designed To Trap Water, Road Salt, Mud And Sand
• They Won t Curl, Crack Or Harden In Sub Zero Weather
• Anti Skid Ridges To Prevent Shifting In Your Vehicle And Come With A Protective, Non Stick Finish To Make Cleanup Quick And Easy
• To Prevent Shifting, The All-Weather Floor Mats Features Anti-Skid Ridges On The Underside Of The Mat
• Manufactured In America To ISO 9001 Standards, And Also Meet FMVSS302 Standards-Your Assurance Of Quality

The Rightline Gear Sport 2 Car Top Carrier is 100% waterproof and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. The intuitive attachment method and simplified design of the Sport Carriers make carrying extra cargo easy. The Sport 2 is a popular size for many travelers.

Product Features:

• Capacity: 15 cu ft
• Dimensions: 42″ L x 34″ W x 18″ H
• Designed for SUVs, minivans, and crossovers, WITH or WITHOUT a roof rack
• 100% waterproof with welded seams and SZIP waterproof zipper; no zipper flap required
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

The Range Jr Car Top Carrier is weatherproof + and attaches to vehicles WITH or WITHOUT a roof rack. Attach the carrier’s straps to a vehicle’s roof rack or use the Car Clips to attach the straps to a vehicle’s door frame weather molding. The carrier is made from UV protected PVC Semi-Coated Mesh XT for maximum durability. Use the Range Carrier on your next family vacation, backwoods expedition, shopping spree, or move.

Product Features:

• Dimensions: 36″ L x 32″ W x 15″ H
• Designed for compact cars (can be used on larger vehicles), WITH or WITHOUT a roof rack
• Weatherproof + with welded seams and a urethane coated zipper
• Includes: carrier, (4) attachment straps, (4) car clips, and stuff sack with sewn-in set up guide

This Remote Key Combo is both a bladed key which starts your ignition and a clicker for your vehicle’s Keyless Entry System. The device is compatible with a variety of Toyota models manufactured between 2013-2021 and features a clean three button layout: UNLOCK, LOCK, and PANIC. The blade itself is uncut and it will need to be cut by a locksmith or automotive professional.

Product Features:

• Replacement Toyota Remote Head Key Combo with FCC ID: GQ4-52T / Contains H-chip Transponder
• 3 button functions: LOCK, UNLOCK, and PANIC
• Freshly installed battery included

This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard. If the car’s receiver recognizes the code, it will allow the car to start. This key holds a Texas 4D-67 G transponder chip. The key blade will need to be cut by a locksmith or automotive professional.

Product Features:

• Replacement Transponder Key with Texas 4D-67 G Transponder Chip
• Contains a transponder chip for enhanced security
• Key blade ready for cutting and pairing

This transmitter device operates your vehicle’s keyless entry system with three button functions: LOCK, UNLOCK, and PANIC. With a freshly installed CR2032 battery, this remote can transmit signals from a range of distances. It’s unique design allows it withstand everyday use while remaining in complete working condition. A built in key loop makes it easy to carry on a keychain, carabiner, or lanyard. This remote also contains an emergency key insert, a preventive measure in the instance of possible lockout situations. It will need to be cut by a locksmith or automotive professional. Enhance vehicle entry and security with a simple click of a button.

Product Features:

• Replacement Toyota Smart Key for the FCC ID: HYQ14FBA
• 3 button functions: LOCK, UNLOCK, and PANIC
• Freshly installed battery included
• A built in key loop makes it easy to carry on a keychain, carabiner, or lanyard
• This remote also contains an emergency key insert, a preventive measure in the instance of possible lockout situations

Dee Zee Bull Bar Guard License Plate Mount. Bull bars can block the license plate on some vehicles, use this bracket to move your license plate to a visible location.

Product Features:

• License Plate Frame Mount
• Made From 2.5 Millimeter Hot Rolled Steel
• Protective Gloss Black Powder Coat Finish
• Attach A License Plate To Your Dee Zee Bull Bar
• Mounts To Underside Of The Center Tube
• Uses 6 Millimeter Threaded Inserts

New Standard Replacement Front License Plate Bracket

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle