Toyota MR2 Spyder Fuel and Emissions Systems

Essential Toyota MR2 Spyder Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Fuel Tank Cleaning Kit

from

$12.49
When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:
  • Helps avoid premature fuel pump failure
  • Lint free towel included
  • Low suds formulation
  • Removes harmful contaminants from the fuel tank
See More

Ishino Stone – Fuel Inject Cushion (Part No.C1011144709ISH)

Fuel Inject Cushion

from

$3.73
Fuel Inject Cushion

Vemo – Evaporative Pressure (Part No.E2070277160VMO)

Evaporative Pressure

from

$177.91
Evaporative Pressure

Carquest Premium – Reman Multi Port Fuel Injector – 4 Pack (Part No.A212-2484-4PK)

Reman Multi Port Fuel Injector - 4 Pack

from

$159.99
The Carquest line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA. Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:
  • Includes four premium fuel injectors
  • Each unit is 100% tested to OE specifications
  • Includes new o-rings and seals made of premium OE quality materials
  • Includes application specific technical bulletin, where applicable
See More

Delphi – Fuel Injection Pressure Regulator (Part No.FP10528)

Fuel Injection Pressure Regulator

from

$117.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:
  • Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
  • Quiet operation, no audible regulator noise
  • Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
  • Consistent and predictable fuel pressure throughout system range of control provides great drivability
See More

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33654)

Fuel Injection Nozzle O-Ring Kit

from

$7.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

Fuel Injector O-Ring Kit

from

$8.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

DENSO – Relay (Part No.567-0015)

Relay

from

$16.79
DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.
See More

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1323)

Fuel Tank Pressure Sensor

from

$199.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ACDelco – Mass Airflow Sensor (Part No.213-3424)

Mass Airflow Sensor

from

$135.99
An ACDelco Professional Remanufactured Mass Air Flow (MAF) Sensor is a high quality replacement for many vehicles on the road today. It is a key part of the engine management system. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. Remanufacturing the mass air flow sensor is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. This mass air flow sensor will provide the same performance, durability, and service life you expect from ACDelco.
See More

Carquest Premium – Idle Air Control Valve (Part No.AEA1099)

Idle Air Control Valve

from

$125.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61128)

Fuel Injection Throttle Body Mounting Gasket

from

$2.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Carquest Premium – Fuel Pump (Part No.E2246803)

Fuel Pump

from

$176.99
Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

DENSO – Oxygen Sensor: Downstream, 4 Wire, 33.07" Long, Heated, Exact Fit (Part No.234-4603)

Oxygen Sensor: Downstream, 4 Wire, 33.07" Long, Heated, Exact Fit

from

$109.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:
  • Specifically designed to meet the increasing demands of today’s engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
See More

Ishino – Fuel Injector O-Ring (Part No.C1012184281ISH)

Fuel Injector O-Ring

from

$4.75
Fuel Injector O-Ring

Carquest – Multi Purpose Relay (Part No.83A1006)

Multi Purpose Relay

from

$16.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Mark Automotive – Fuel Tank Cap Seal (Part No.E206089586MAM)

Fuel Tank Cap Seal

from

$19.45
Fuel Tank Cap Seal

Ishino Stone – Fuel Injector O-Ring (Part No.C1012262676ISH)

Fuel Injector O-Ring

from

$2.01
Fuel Injector O-Ring

Carquest – Fuel Injector (Part No.63809)

Fuel Injector

from

$118.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
  • High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
  • Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
See More

Carquest Premium – Fuel Pump Strainer FS2322211 (Part No.FS2322211)

Fuel Pump Strainer FS2322211

from

$15.99
CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:
  • Meets or exceeds OE specifications for fit, form and function
  • 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
  • OE upgraded turbine impellers greatly reduce fuel pulsation
  • All fuel pumps are 100% performance tested
See More

Carquest Premium – Fuel Cap Tester Adapter (Part No.12427)

Fuel Cap Tester Adapter

from

$34.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:
  • BAR Certified adapters
  • Adapter check’s a fuel cap’s ability to hold pressure.
  • Adapters meet EPA standards for recommended fleet coverage.
  • Check adapter application chart for specific makes and models
See More

Carquest Premium – Vapor Canister (Part No.CPN2677)

Vapor Canister

from

$496.99
Vapor Canister

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61134)

Fuel Injection Throttle Body Mounting Gasket

from

$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

NTK – Air Charge Temperature Sensor (Part No.EF0105)

Air Charge Temperature Sensor

from

$29.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:
  • Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
  • NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
  • Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.
See More

Carquest Premium – Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10834)

Fuel Cap: 10834, Screw On, Direct Fit, Provides Tight Seal, 1 Pack

from

$15.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Passes all state and federal emissions tests
  • Manufactured from durable, long-life materials
  • Reduces air pollution with proper sealing and venting
  • Independently tested for emission control
See More

Helping You Find the Right Fuel and Emissions Systems for Your Toyota MR2 Spyder

You love your MR2 Spyder. So we’ve made it easier than ever to help you find Toyota MR2 Spyder Fuel and Emissions Systems in our online catalog. Our inventory holds 63 aftermarket and OEM Fuel and Emissions Systems for your Toyota MR2 Spyder, ranging from $2.01 to $496.99.

We offer parts from 19 brands trusted to make quality Fuel and Emissions Systems for your Toyota MR2 Spyder. Before you buy, take some time to read through customer reviews. We currently have 4,422 reviews of Toyota MR2 Spyder Fuel and Emissions Systems from previous customers. Some of the top rated parts include Locking Fuel Cap with 4.3 stars and Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack with 4.6 stars.

Find your MR2 Spyder Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Toyota MR2 Spyder part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your Toyota MR2 Spyder

Our inventory holds Fuel and Emissions Systems for your Toyota MR2 Spyder from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, FELPRO, and Bosch, all of which can keep that Toyota happy.

Top-Rated Carquest Premium Fuel and Emissions Systems

Leading Carquest Premium Fuel and Emissions Systems

We carry Carquest Premium brand parts for your Toyota MR2 Spyder across several catalog categories, including Gas Caps. Some of our most reviewed Carquest Premium parts include:

FAQs for Toyota MR2 Spyder Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the Toyota MR2 Spyder?

Out of 63 Fuel and Emissions Systems for the Toyota MR2 Spyder, the most popular in our inventory are:

What are the top-rated Toyota MR2 Spyder Fuel and Emissions Systems?

Top-rated Fuel and Emissions Systems for your Toyota MR2 Spyder based on customer reviews/ratings are:
Locking Fuel Cap
from $23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”