1962 Chevrolet K10 Performance Ignition Products
More 1962 Chevrolet K10 Performance Ignition Products
Find your specific 1962 Chevrolet K10 original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1962 Chevrolet K10 Performance Ignition Products
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Hypertech – Power Coil Kit for GM HEI Systems with Clamp Down Cap (Part No.4050)
from
$95.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.
Product Features:
See More
Product Features:
- High Output Voltage
- More Spark Energy
- Up To 7000 RPMs
- No Drop Off In Power As RPMs Increase
- Wider Plug Gaps; Brass Terminals
- Constructed w/Burn Through Resistant Materials
- Excellent Dielectric Strength
- Resists Carbon Tracking
- Product might not be available in all states due to local laws.
Accel – Super Coil (Part No.140005)
from
$95.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct plug replacements for OEM coils. They feature bodies and, or secondary towers molded in ACCEL yellow and feature brass secondary contacts (except direct fire coil on plug applications).
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-32
MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)
from
$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
MSD Ignition – Coil; GM External HEI Coil; High Performance (Part No.8226)
from
$71.99
Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.
Product Features:
See More
Product Features:
- Direct performance replacement for GM dual connector coil
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
Popular 1962 Chevrolet K10 Performance Ignition Products Categories
1962 Chevrolet K10 Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1962 Chevrolet K10. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 3 different Performance Ignition Products in our inventory ranging from $40.99 to $98.99. That means you can find the exact parts or products you need to keep that 1962 Chevrolet K10 running smoothly.
Performance Ignition Products are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1962 Chevrolet K10. Accel and MSD Ignition are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1962 Chevrolet K10, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1962 Chevrolet K10 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1962 Chevrolet K10 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1962 Chevrolet K10 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your K10 the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular Accel Performance Ignition Products
We carry Accel parts in our stock across Performance Coils categories, plus more. For a 1962 Chevrolet K10, our most popular Accel Performance Ignition Products include:
FAQs for 1962 Chevrolet K10 Performance Ignition Products
What are the most purchased Performance Ignition Products for the 1962 Chevrolet K10?
Out of 3 Performance Ignition Products for the 1962 Chevrolet K10, the most popular in our inventory are:
