Toyota FJ Cruiser Steering and Chassis Parts

Essential Toyota FJ Cruiser Steering and Chassis Parts

Rein – Power Steering High Press Feed Rtn Assembly (Part No.PSH0507)

Power Steering High Press Feed Rtn Assembly

from

$184.99
Rein OE Quality power steering high pressure feed and return hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:
  • A direct fit, replacement hose and line assembly
  • SAE J188 compliant high pressure rubber compound hose with internal noise absorber
  • SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
  • Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
  • Pre attached protective jacket(s) and heat sleeve(s), where required
See More

Beck/Arnley – Steering Rack Boot Kit (Part No.103-2912)

Steering Rack Boot Kit

from

$25.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • One piece neoprene boot (this is not a split boot)
  • Includes boot and two clamps for complete installation.
  • Quality construction for durability
  • Application specific for this vehicle
See More

Dorman – Suspension Control Arm (Part No.524-213)

Suspension Control Arm

from

$155.99
This suspension track bar is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment track bar on specific vehicles.
  • Reliable fit – precision-engineered to match the design and dimensions of original components.
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Rare Parts – Sway Bar Frame Bushing (Part No.RP22185)

Sway Bar Frame Bushing

from

$40.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Rubber or Thermoplastic material
  • No Squeak
  • Restores vehicle handling
  • Improves body roll
See More

MOOG – Stabilizer Bar Link (Part No.K90677)

Stabilizer Bar Link

from

$83.99
Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • EASY TO INSTALL — Wrench flats ensure easy installation and removal
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
  • STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
  • PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Cardone – Power Steering Filter (Part No.20-0012F)

Power Steering Filter

from

$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

Dorman – Left Steering Knuckle (Part No.698-043)

Left Steering Knuckle

from

$436.99
This steering knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:
  • Direct replacement – this steering knuckle is designed to replace the original knuckle on specific vehicles.
  • Reliable fit – precision-engineered to match the dimensions of original components.
  • Trustworthy construction – manufactured to strict standards using durable materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Tie Rod End (Part No.ES80895)

Tie Rod End

from

$34.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
  • RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
See More

Dorman – Suspension Control Arm (Part No.526-653)

Suspension Control Arm

from

$218.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Energy Suspension – TrackBarBsh (Part No.8.7105R)

TrackBarBsh

from

$20.99
TrackBarBsh

MOOG – Caster/Camber Adjusting Kit (Part No.K100128)

Caster/Camber Adjusting Kit

from

$92.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Can bring vehicles back to factory specification
  • Can solve excessive tire wear and steering issues
  • Shims and bushings provide precise camber, caster and toe adjustments
  • Incorporates proven design and engineering features
  • Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
See More

Carquest Premium – Automatic Transmission Oil Pressure Switch Connector (Part No.PTA1631)

Automatic Transmission Oil Pressure Switch Connector

from

$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

CTR – CTR Tie Rod End (Part No.M3010304786CTR)

CTR Tie Rod End

from

$83.46
CTR is an O.E.M. suspension parts manufacturer for Korean vehicles and a leading supplier for Japanese, American, and European vehicles in the worldwide aftermarket. CTR uses an advances triple heat treat process for the body and ball stud to extend longer life and enhance stable performance. CTR manufactures the ball joint using the latest OE polymer encapsulation technology.

Product Features:
  • Lower preload at assembly, less friction
  • No lubrication required in service
  • Less service wear
  • Longer service life
See More

National – Multi Purpose Seal (Part No.221510)

Multi Purpose Seal

from

$3.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

MOOG – Ball Joint (Part No.K500017)

Ball Joint

from

$55.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

Carquest Premium – Power Steering Pressure Switch (Part No.SAA3945)

Power Steering Pressure Switch

from

$58.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Powercraft – Rack Pinion Seal Kit (Part No.8944)

Rack Pinion Seal Kit

from

$92.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More

AST – Polyurethane Sway Bar Link Bushing (Part No.L1031846922AST)

Polyurethane Sway Bar Link Bushing

from

$17.92
Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:
  • Unique polyurethane alternative
  • Sleeves in the bushings freely rotate which enhances longevity
  • Impregnated with graphite to aid in lubrication and reduce noise
  • Alternative to conventional rubber suspension bushings
See More

Carquest Premium – Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose (Part No.37950)

Power Steering Return Hose Assembly, 3/8" I.D. Hose x 3/8" I.D. Hose

from

$72.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Carquest Premium – Power Steering Pressure Switch (Part No.PSA1053)

Power Steering Pressure Switch

from

$259.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Power Steering End Fittings, 17mm Male "O" Ring x 3/8" Beaded Tube (Part No.34132)

Power Steering End Fittings, 17mm Male "O" Ring x 3/8" Beaded Tube

from

$24.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:
  • Zinc coated tubes protect against rust and corrosion
See More

Carquest Premium – Ball Joint (Part No.410-277010)

Ball Joint

from

$52.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:
  • OE matched design for Form, Fit, and Function
  • Advanced corrosion-resistant electro-coating to reduce rust
  • Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
  • Hex formed studs &/or wrench flats for ease of installation
  • Hardware included for easier installation (where applicable)
  • Knurling improves retention between the control arm/knuckle and ball joint housing
  • Snap ring design adds an additional safety feature to secure the ball joint in the knuckle
See More

PWR – New Power Steering Pump with Pulley (Part No.60-5286P)

New Power Steering Pump with Pulley

from

$248.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:
  • PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
  • All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
  • Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
  • Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
  • Enables you to achieve a more efficient, durable, and professional installation
See More

Dorman – Power Steering Reservoir (Part No.M20301328722DOR)

Power Steering Reservoir

from

$188.73
Although no plastic fluid reservoir is completely immune to the conditions that cause cracking, some are less susceptible than others. Dorman uses tough blow-molded plastic for Dorman’s Power Steering Reservoir, steeling it against coolant corrosion, fluid freezing, or exposure to extreme under hood heat.

Product Features:
  • Includes reservoir cap and level sensor (where applicable)
  • Direct replacement for a proper fit every time
  • Weather-resistant
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Cardone New – New Power Steering Reservoir (Part No.3R-111)

New Power Steering Reservoir

from

$112.99
Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:
  • 100% testing ensures leak-free performance.
  • Designed to match O.E. fit, function and performance.
  • Manufactured from O.E. grade material for strength and durability.
  • Resistant to cracking caused by the high temperatures in the engine compartment.
  • Reservoirs with integrated filter have the same filtration efficiency as O.E.
See More

Helping You Find the Right Steering and Chassis Parts for Your Toyota FJ Cruiser

You love your FJ Cruiser. So we’ve made it easier than ever to help you find Toyota FJ Cruiser Steering and Chassis Parts in our online catalog. Our inventory holds 129 aftermarket and OEM Steering and Chassis Parts for your Toyota FJ Cruiser, ranging from $3.79 to $647.99.

We offer parts from 25 brands trusted to make quality Steering and Chassis Parts for your Toyota FJ Cruiser. Before you buy, take some time to read through customer reviews. We currently have 3,005 reviews of Toyota FJ Cruiser Steering and Chassis Parts from previous customers. Some of the top rated parts include Stabilizer Bar Link with 5.0 stars and Stabilizer Bar Bushing Kit with 5.0 stars.

Find your FJ Cruiser Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Toyota FJ Cruiser part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Toyota FJ Cruiser

Our inventory holds Steering and Chassis Parts for your Toyota FJ Cruiser from 25 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Moog, and Cardone, all of which can keep that Toyota happy.
We have Driveworks parts available for your Toyota FJ Cruiser in categories like Sway Bars. Some of the top-rated Driveworks parts in these categories are:
Sway Bar Link Kit
from $32.99
(2)
Sway Bar Link Kit
Sway Bar Link Kits
Sway Bar Link Kit
from $32.99
(3)
Sway Bar Link Kit
Sway Bar Link Kits

Top-Rated Imperial Steering and Chassis Parts

Leading Imperial Steering and Chassis Parts

We carry Imperial brand parts for your Toyota FJ Cruiser across several catalog categories, including Power Steering Parts. Some of our most reviewed Imperial parts include:
Transmission Oil Cooler Hose
from $32.49
(94)
Transmission Oil Cooler Hose
Power Steering Pressure Hoses
Power Steering Oil Cooler
from $28.49
(83)
Power Steering Oil Cooler
Power Steering Coolers
Mounting Kit System
from $11.49
(27)
Mounting Kit System
Power Steering Coolers

FAQs for Toyota FJ Cruiser Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Toyota FJ Cruiser?

Out of 129 Steering and Chassis Parts for the Toyota FJ Cruiser, the most popular in our inventory are:
New Power Steering Filter
from $31.99
(59)
New Power Steering Filter
Power Steering Filters
Tie Rod End
from $34.99
(6)
Tie Rod End
Tie Rod Ends
Tie Rod End
from $35.99
(4)
Tie Rod End
Tie Rod Ends

What are the top-rated Toyota FJ Cruiser Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Toyota FJ Cruiser based on customer reviews/ratings are:
Stabilizer Bar Link
from $83.99
(8)
Stabilizer Bar Link
“A cheap fix to a rattle noise from worn sway bar end-links”
Stabilizer Bar Bushing Kit
from $21.99
(5)
Stabilizer Bar Bushing Kit
“Exactly what I ordered”
Stabilizer Bar Link
from $83.99
(4)
Stabilizer Bar Link
“High quality parts, fit great, work great.”